Re: [PATCH v7 1/4] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs

[Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>]

On 4/14/2022 12:24 AM, Matthias Kaehlcke wrote:
Thanks for your time Matthias!!!
> On Wed, Apr 13, 2022 at 08:51:14PM +0530, Srinivasa Rao Mandadapu wrote:
>> SC7280 has VA, TX and RX macros with SoundWire Controllers to attach with
>> external codecs using soundwire masters. Add these nodes for sc7280 based
>> platforms audio use case.
>>
>> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
>> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
>> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/sc7280.dtsi | 122 +++++++++++++++++++++++++++++++++++
>>   1 file changed, 122 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> index 50fea0e..c0f127f 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> @@ -1980,6 +1980,128 @@
>>   			#clock-cells = <1>;
>>   		};
>>   
>> +		lpass_rx_macro: codec@3200000 {
>> +			compatible = "qcom,sc7280-lpass-rx-macro";
>> +			reg = <0 0x03200000 0 0x1000>;
>> +
>> +			status = "disabled";
> nit: this is easily missed here inmidst of the other stuff, best place
> it at the end of the node as many other nodes do.
Okay. will place accordingly.
>
>> +			pinctrl-names = "default";
>> +			pinctrl-0 = <&lpass_rx_swr>;
>> +
>> +			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
>> +				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
>> +				 <&lpass_va_macro>;
>> +			clock-names = "mclk", "npl", "fsgen";
>> +
>> +			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,p
>> +					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
>> +			power-domain-names ="macro", "dcodec";
> add space after '='.
Okay.
>
>> +
>> +			#clock-cells = <0>;
>> +			#sound-dai-cells = <1>;
>> +		};
>> +
>> +		swr0: soundwire@3210000 {
>> +			compatible = "qcom,soundwire-v1.6.0";
>> +			reg = <0 0x03210000 0 0x2000>;
>> +
>> +			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&lpass_rx_macro>;
>> +			clock-names = "iface";
>> +
>> +			qcom,din-ports = <0>;
>> +			qcom,dout-ports = <5>;
>> +
>> +			resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
>> +			reset-names = "swr_audio_cgcr";
> The resets aren't mentioned in the binding, should they be added?
Yes. They are to be added. Mentioned same in the cover letter dependencies.
>
>> +
>> +			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
>> +			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>;
>> +			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x01>;
>> +			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
>> +			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
>> +			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
>> +			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
>> +			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
>> +			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
>> +
>> +			#sound-dai-cells = <1>;
>> +			#address-cells = <2>;
>> +			#size-cells = <0>;
> in difference to the other nodes the soundwire ones don't have
> 'status = "disabled"', should they be disabled by default?
Okay. will add accordingly.
>
>> +		};
>> +
>> +		lpass_tx_macro: codec@3220000 {
>> +			compatible = "qcom,sc7280-lpass-tx-macro";
>> +			reg = <0 0x03220000 0 0x1000>;
>> +
>> +			status = "disabled";
>> +			pinctrl-names = "default";
>> +			pinctrl-0 = <&lpass_tx_swr>;
>> +
>> +			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
>> +				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
>> +				 <&lpass_va_macro>;
>> +			clock-names = "mclk", "npl", "fsgen";
>> +
>> +			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
>> +					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
>> +			power-domain-names ="macro", "dcodec";
> add space after '='
Okay.
>
>> +
>> +			#clock-cells = <0>;
>> +			#sound-dai-cells = <1>;
>> +		};
>> +
>> +		swr1: soundwire@3230000 {
>> +			compatible = "qcom,soundwire-v1.6.0";
>> +			reg = <0 0x03230000 0 0x2000>;
>> +
>> +			interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
>> +					      <&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "swr_master_irq", "swr_wake_irq";
>  From the binding
>
>    - interrupt-names:
>          Usage: Optional
>          Value type: boolean
>          Value type: <stringlist>
>          Definition: should be "core" for core and "wakeup" for wake interrupt.
>
> Does the binding need an update?
Here interrupt names are not being used. Will remove here.
>
>> +			clocks = <&lpass_tx_macro>;
>> +			clock-names = "iface";
>> +
>> +			qcom,din-ports = <3>;
>> +			qcom,dout-ports = <0>;
>> +
>> +			resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
>> +			reset-names = "swr_audio_cgcr";
>> +
>> +			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x03 0x03>;
>> +			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02>;
>> +			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00>;
>> +			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff>;
>> +			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff>;
>> +			qcom,ports-word-length =	/bits/ 8 <0xff 0x00 0xff>;
>> +			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff>;
>> +			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff>;
>> +			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00>;
>> +			qcom,port-offset = <1>;
>> +
>> +			#sound-dai-cells = <1>;
>> +			#address-cells = <2>;
>> +			#size-cells = <0>;
>> +		};
>> +
>> +		lpass_va_macro: codec@3370000 {
>> +			compatible = "qcom,sc7280-lpass-va-macro";
>> +			reg = <0 0x03370000 0 0x1000>;
>> +
>> +			status = "disabled";
>> +			pinctrl-0 = <&lpass_dmic01>;
>> +			pinctrl-names = "default";
>> +
>> +			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>;
>> +			clock-names = "mclk";
>> +
>> +			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
>> +					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
>> +			power-domain-names ="macro", "dcodec";
> add space after '='.
Okay.
>
>> +
>> +			#clock-cells = <0>;
>> +			#sound-dai-cells = <1>;
>> +		};
>> +
>>   		lpass_ag_noc: interconnect@3c40000 {
>>   			reg = <0 0x03c40000 0 0xf080>;
>>   			compatible = "qcom,sc7280-lpass-ag-noc";
>> -- 
>> 2.7.4
>>