From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 3 Nov 2000 20:25:13 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 3 Nov 2000 20:25:04 -0500 Received: from panic.ohr.gatech.edu ([130.207.47.194]:63751 "EHLO havoc.gtf.org") by vger.kernel.org with ESMTP id ; Fri, 3 Nov 2000 20:24:51 -0500 Message-ID: <3A036539.57B741C6@mandrakesoft.com> Date: Fri, 03 Nov 2000 20:24:09 -0500 From: Jeff Garzik Organization: MandrakeSoft X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.18pre18 i686) X-Accept-Language: en MIME-Version: 1.0 To: Alan Cox CC: David Ford , tytso@mit.edu, linux-kernel@vger.kernel.org Subject: Re: Linux 2.4 Status / TODO page (Updated as of 2.4.0-test10) In-Reply-To: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Alan Cox wrote: > > > > Not unless it was fixed in test10 release. I have a PC LinkSys dual 10/100 and > > > 56K card that will kill the machine if you physically pull it out no matter what > > > cardctl/module steps are taken. > > > > > > It uses the ne2k and serial drivers. > > > > Part of that might be that serial doesn't support hotplug without > > patching. > > Linksys rings a bell with an outstandng 2.2 lockup on pcmcia. I think this might > be a driver bug ? On 2.2.x, possibly. On 2.4.x: 1) insert CardBus serial or modem card, that reports itself as PCI_CLASS_COMMUNICATION_SERIAL. 2) modprobe serial, it sees and registers the PCI serial port. 3) eject card, which serial.c doesn't presently notice. ... Jeff -- Jeff Garzik | Dinner is ready when Building 1024 | the smoke alarm goes off. MandrakeSoft | -/usr/games/fortune - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/