archive mirror
 help / color / mirror / Atom feed
From: "David N. Lombard" <>
To: Juri Haberland <>
Cc:, Linux Kernel <>
Subject: Re: 2.4.5-ac13, APM, and Dell Inspiron 8000
Date: Thu, 14 Jun 2001 07:52:47 -0700	[thread overview]
Message-ID: <> (raw)
In-Reply-To: <>

Juri Haberland wrote:
> You wrote:
> >
> > I've been running 2.4.5 on my new Dell I8000 without too many
> > problems.  Last night I built -ac13 (on my porch) and booted it
> > without incident.  Later, going inside and re-connecting the AC I
> > notice that the thing's hung.  I play around a bit and discover that
> > the act of plugging or unplugging the power cord will hang the box.
> >
> > This lead me to disable all power manglement in the BIOS.  No joy.
> >
> > This problem does not exist using straight 2.4.5.
> >
> > Has anybody else seen this?  Any debugging suggestions?  Or stated
> > differently, has anybody with this machine arrived at a configuration
> > that avoids weirdness in the power management framework?
> Ok, I just tried that and my i8000 locked up as well. No problems with
> 2.4.5 as well. I have also another problem:
> Running with -ac13 it doesn't poweroff properly - but it did running
> 2.4.5. Sometimes it just stops where it should poweroff and locks hard,
> sometimes it blanks the display before locking up hard.

The Dell i5000e crashes when switching between mains and battery when
the disk is active, so you might try to plug/unplug with the system

If this works, you'll be in a *little* better spot.

As for hanging, you might try suspending it (i.e., close the display)
and opening it back up.  This works for the i5000e; it also clears the
display that sometimes goes *nuts* when switching video modes.  This
last behavior has only surfaced with the latest A06 BIOS.

David N. Lombard

  reply	other threads:[~2001-06-14 14:53 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-06-13 17:06 Georg Nikodym
2001-06-14  9:07 ` Juri Haberland
2001-06-14 14:52   ` David N. Lombard [this message]
2001-06-14 15:24     ` Juri Haberland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \
    --subject='Re: 2.4.5-ac13, APM, and Dell Inspiron 8000' \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).