From: "Adam D. Scislowicz" <adams@fourelle.com>
To: linux-kernel@vger.kernel.org
Cc: adams@fourelle.com
Subject: Re: IDE0/Slave Detection Fails in 2.4.x(2.4.4, 2.4.5, and 2.4.5-ac18 tested)
Date: Fri, 06 Jul 2001 14:12:00 -0700 [thread overview]
Message-ID: <3B4629A0.2AFB3AF9@fourelle.com> (raw)
In-Reply-To: <3B4605E5.DDA1B8CA@fourelle.com>
Just an update: I have now tested it with the 2.4.6 kernel and the problem
persists :(
I failed to mention in the previous email that the machine is an 2
processor SMP machine.
-Adam
"Adam D. Scislowicz" wrote:
> I am having a problem where the 2.4.x(2.4.4, and 2.4.5, and 2.4.5-ac18)
> kernel does not detect the IDE0/primary slave device. If I put a third
> drive in the system as IDE1/secondary master then that is detected.
> However
> the IDE0/primary slave is never detected.
>
> Using the 2.2.19 kernel the IDE0/primary slave device IS detected
> properly. This
> can be seen below in the 2.2.19 Kernel Init Messages.
>
> Below is some more detailed info.
> *Note: Please CC me in any replay as I am not subscribed to this
> mailiing list ;)
>
> -Adam Scislowicz
>
> [ My IDE Controller Info (2.2.19:/proc/pci) ]
> Bus 0, device 7, function 1:
> IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
> Medium devsel. Fast back-to-back capable. Master Capable.
> Latency=64.
> I/O at 0xffa0 [0xffa1].
>
> [ The 2.2.19 Kernel Init Messages ]
> PIIX4: IDE controller on PCI bus 00 dev 39
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
> hda: TOSHIBA THNCF032MAA, ATA DISK drive
> hdb: IBM-DARA-206000, ATA DISK drive
> hdc: ST320420A, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: TOSHIBA THNCF032MAA, 31MB w/2kB Cache, CHS=496/4/32
> hdb: IBM-DARA-206000, 5729MB w/418kB Cache, CHS=730/255/63, UDMA
> hdc: ST320420A, 19458MB w/2048kB Cache, CHS=39535/16/63, UDMA
>
> [ The 2.4.5-ac18 Kernel Init Messages ]
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> PIIX4: IDE controller on PCI bus 00 dev 39
> PIIX4: chipset revision 1
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
> hda: TOSHIBA THNCF032MAA, ATA DISK drive
> hdc: ST320420A, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: 63488 sectors (33 MB) w/2KiB Cache, CHS=496/4/32, DMA
> hdc: 39851760 sectors (20404 MB) w/2048KiB Cache, CHS=39535/16/63,
> UDMA(33)
prev parent reply other threads:[~2001-07-06 21:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-07-06 18:39 IDE0/Slave Detection Fails in 2.4.x(2.4.4, 2.4.5, and 2.4.5-ac18 tested) Adam D. Scislowicz
2001-07-06 21:12 ` Adam D. Scislowicz [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3B4629A0.2AFB3AF9@fourelle.com \
--to=adams@fourelle.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).