From: Ben Greear <greearb@candelatech.com>
To: Jes Sorensen <jes@trained-monkey.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: can't run two acenics in the same machine??
Date: Fri, 27 Sep 2002 20:13:10 -0700 [thread overview]
Message-ID: <3D951E46.5070402@candelatech.com> (raw)
Since the e1000 keeps scribbling over my memory (it appears), I tried
to tie-break with two NetGear GA 620 nics.
Well, it only finds one!!
In the meantime, I hear that tigonIII is a reasonably good performer.
Anyone suggest a NIC based on this chipset that is well supported?
From dmesg:
acenic.c: v0.92 08/05/2002 Jes Sorensen, linux-acenic@SunSITE.dk
http://home.cern.ch/~jes/gige/acenic.html
eth2: NetGear GA620 Gigabit Ethernet at 0xf4000000, irq 10
Tigon II (Rev. 6), Firmware: 12.4.11, MAC: 00:a0:cc:73:37:3a
PCI bus width: 64 bits, speed: 66MHz, latency: 64 clks
Disabling PCI memory write and invalidate
eth2: Firmware NOT running!
eth2: NetGear GA620 Gigabit Ethernet at 0xf4004000, irq 9
Tigon II (Rev. 6), Firmware: 12.4.11, MAC: 00:a0:cc:73:35:d6
PCI bus width: 64 bits, speed: 66MHz, latency: 64 clks
Disabling PCI memory write and invalidate
eth2: Firmware up and running
from lspci -v:
00:08.0 Ethernet controller: Netgear GA620 (rev 01)
Subsystem: Netgear: Unknown device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), cache line size 10
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=16K]
00:09.0 Ethernet controller: Netgear GA620 (rev 01)
Subsystem: Netgear: Unknown device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), cache line size 10
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f4004000 (32-bit, non-prefetchable) [size=16K]
Any ideas?
Thanks,
Ben
--
Ben Greear <greearb@candelatech.com> <Ben_Greear AT excite.com>
President of Candela Technologies Inc http://www.candelatech.com
ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear
next reply other threads:[~2002-09-28 3:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-28 3:13 Ben Greear [this message]
2002-09-28 20:49 ` can't run two acenics in the same machine?? Steve Mickeler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D951E46.5070402@candelatech.com \
--to=greearb@candelatech.com \
--cc=jes@trained-monkey.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).