From: "Yu, Fenghua" <fenghua.yu@intel.com>
To: Yinghai Lu <yinghai@kernel.org>, "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"Mallick, Asit K" <asit.k.mallick@intel.com>,
Tigran Aivazian <tigran@aivazian.fsnet.co.uk>,
Andreas Herrmann <andreas.herrmann3@amd.com>,
Borislav Petkov <borislav.petkov@amd.com>,
linux-kernel <linux-kernel@vger.kernel.org>, x86 <x86@kernel.org>
Subject: RE: [PATCH v3 08/10] x86/head64.c: Early update ucode in 64-bit
Date: Sun, 16 Dec 2012 23:59:02 +0000 [thread overview]
Message-ID: <3E5A0FA7E9CA944F9D5414FEC6C71220470F81EE@ORSMSX105.amr.corp.intel.com> (raw)
In-Reply-To: <CAE9FiQXmz07SUEwJdr0QD8Y2Uro6Sizkeg4KfFkJSuQLFW3Fow@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 457 bytes --]
> > This patchset isn't before the #PF handler version (you can tell
> because
> > it has zap_identity_mappings()), but it does make sense to load the
> IDT
> > first.
>
> it has to be rebased after #PF handler version. otherwise it can not
> handle for framdisk
> that is loaded after 1G.
>
> Fenghua,
>
> can you post your boot log with 64bit with your patch?
>
> Yinghai
Attached is dmesg with the patches.
Thanks.
-Fenghua
[-- Attachment #2: early_ucode_dmesg --]
[-- Type: application/octet-stream, Size: 68615 bytes --]
[ 0.000000] CPU0 microcode updated early to revision 0xa4, date = 2010-10-02
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.0+ (fyu@linux-romley1.sc.intel.com) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #17 SMP Sun Dec 16 08:39:17 PST 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0 root=UUID=94addf6f-dd82-48fd-bb1b-809567e7a9a4 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=us rd.luks=0 LANG=en_US.UTF-8 rhgb quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003e6affff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003e6b0000-0x000000003e6ccfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003e6cd000-0x000000003e6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003e700000-0x000000003effffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 7658CTO/7658CTO, BIOS 7LET37WW (1.07 ) 04/17/2007
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x3e6b0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 03F000000 mask FFF000000 uncachable
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 03E700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 03E800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 1008MB, range: 16MB, type UC
[ 0.000000] reg 1, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 999MB, range: 1MB, type UC
[ 0.000000] reg 3, base: 1000MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 999M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 999MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 1000MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 1008MB, range: 16MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000f6900-0x000f690f] mapped at [ffff8800000f6900]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x3e6affff]
[ 0.000000] [mem 0x00000000-0x3e5fffff] page 2M
[ 0.000000] [mem 0x3e600000-0x3e6affff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x3e6affff @ [mem 0x1fffd000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x27608000-0x2fafbfff]
[ 0.000000] ACPI: RSDP 00000000000f68d0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 000000003e6bdfb8 00094 (v01 LENOVO TP-7L 00001070 LTP 00000000)
[ 0.000000] ACPI: FACP 000000003e6be100 000F4 (v03 LENOVO TP-7L 00001070 LNVO 00000001)
[ 0.000000] ACPI BIOS Bug: Warning: 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20121018/tbfadt-567)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20121018/tbfadt-598)
[ 0.000000] ACPI: DSDT 000000003e6be50c 0E6A9 (v01 LENOVO TP-7L 00001070 MSFT 03000000)
[ 0.000000] ACPI: FACS 000000003e6e4000 00040
[ 0.000000] ACPI: SSDT 000000003e6be2b4 00258 (v01 LENOVO TP-7L 00001070 MSFT 03000000)
[ 0.000000] ACPI: ECDT 000000003e6ccbb5 00052 (v01 LENOVO TP-7L 00001070 LNVO 00000001)
[ 0.000000] ACPI: TCPA 000000003e6ccc07 00032 (v02 LENOVO TP-7L 00001070 LNVO 00000001)
[ 0.000000] ACPI: APIC 000000003e6ccc39 00068 (v01 LENOVO TP-7L 00001070 LNVO 00000001)
[ 0.000000] ACPI: MCFG 000000003e6ccca1 0003C (v01 LENOVO TP-7L 00001070 LNVO 00000001)
[ 0.000000] ACPI: HPET 000000003e6cccdd 00038 (v01 LENOVO TP-7L 00001070 LNVO 00000001)
[ 0.000000] ACPI: SLIC 000000003e6ccdf0 00176 (v01 LENOVO TP-7L 00001070 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000003e6ccf66 00028 (v01 LENOVO TP-7L 00001070 LTP 00000001)
[ 0.000000] ACPI: ASF! 000000003e6ccf8e 00072 (v16 LENOVO TP-7L 00001070 PTL 00000001)
[ 0.000000] ACPI: SSDT 000000003e6e2697 0025F (v01 LENOVO TP-7L 00001070 INTL 20050513)
[ 0.000000] ACPI: SSDT 000000003e6e28f6 000A6 (v01 LENOVO TP-7L 00001070 INTL 20050513)
[ 0.000000] ACPI: SSDT 000000003e6e299c 004F7 (v01 LENOVO TP-7L 00001070 INTL 20050513)
[ 0.000000] ACPI: SSDT 000000003e6e2e93 001D8 (v01 LENOVO TP-7L 00001070 INTL 20050513)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T61
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003e6affff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3e6affff]
[ 0.000000] NODE_DATA [mem 0x3e69c000-0x3e6affff]
[ 0.000000] [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003ce00000-ffff88003ddfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x3e6affff]
[ 0.000000] On node 0 totalpages: 255549
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3931 pages used for memmap
[ 0.000000] DMA32 zone: 247637 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0x3f000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003e400000 s84416 r8192 d22080 u1048576
[ 0.000000] pcpu-alloc: s84416 r8192 d22080 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 251548
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0 root=UUID=94addf6f-dd82-48fd-bb1b-809567e7a9a4 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=us rd.luks=0 LANG=en_US.UTF-8 rhgb quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 853560k/1022656k available (6328k kernel code, 460k absent, 168636k reserved, 6868k data, 1060k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1795.666 MHz processor
[ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.33 BogoMIPS (lpj=1795666)
[ 0.001008] pid_max: default: 32768 minimum: 301
[ 0.001047] Security Framework initialized
[ 0.001060] SELinux: Initializing.
[ 0.001073] SELinux: Starting in permissive mode
[ 0.001234] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.002239] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.002548] Mount-cache hash table entries: 256
[ 0.002821] Initializing cgroup subsys cpuacct
[ 0.002824] Initializing cgroup subsys devices
[ 0.002826] Initializing cgroup subsys freezer
[ 0.002828] Initializing cgroup subsys net_cls
[ 0.002830] Initializing cgroup subsys blkio
[ 0.002832] Initializing cgroup subsys perf_event
[ 0.002863] CPU: Physical Processor ID: 0
[ 0.002865] CPU: Processor Core ID: 0
[ 0.002867] mce: CPU supports 6 MCE banks
[ 0.002875] CPU0: Thermal monitoring enabled (TM2)
[ 0.002879] process: using mwait in idle threads
[ 0.002885] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.002885] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.002885] tlb_flushall_shift: -1
[ 0.003026] Freeing SMP alternatives: 24k freed
[ 0.004696] ACPI: Core revision 20121018
[ 0.014017] ftrace: allocating 23864 entries in 94 pages
[ 0.023400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.033416] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz (fam: 06, model: 0f, stepping: 0d)
[ 0.034000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.034000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.034000] ... version: 2
[ 0.034000] ... bit width: 40
[ 0.034000] ... generic registers: 2
[ 0.034000] ... value mask: 000000ffffffffff
[ 0.034000] ... max period: 000000007fffffff
[ 0.034000] ... fixed-purpose events: 3
[ 0.034000] ... event mask: 0000000700000003
[ 0.034705] smpboot: Booting Node 0, Processors #1 OK
[ 0.002000] CPU1 microcode updated early to revision 0xa4, date = 2010-10-02
[ 0.046000] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.046000] Measured 327015 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.046000] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.046031] Brought up 2 CPUs
[ 0.046034] smpboot: Total of 2 processors activated (7182.66 BogoMIPS)
[ 0.047009] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.048122] devtmpfs: initialized
[ 0.048230] PM: Registering ACPI NVS region [mem 0x3e6cd000-0x3e6fffff] (208896 bytes)
[ 0.050172] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.050212] RTC time: 0:07:21, date: 12/17/12
[ 0.050263] NET: Registered protocol family 16
[ 0.050484] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.050487] ACPI: bus type pci registered
[ 0.050566] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.050571] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.057013] PCI: Using configuration type 1 for base access
[ 0.058179] bio: create slab <bio-0> at 0
[ 0.058179] ACPI: Added _OSI(Module Device)
[ 0.058179] ACPI: Added _OSI(Processor Device)
[ 0.058179] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.058179] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.058179] ACPI: Added _OSI(Linux)
[ 0.059924] ACPI: EC: EC description table is found, configuring boot EC
[ 0.071500] ACPI: SSDT 000000003e6e1d72 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.071516] ACPI: Dynamic OEM Table Load:
[ 0.071520] ACPI: SSDT (null) 00282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.071660] ACPI: SSDT 000000003e6e2079 0061E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.072279] ACPI: Dynamic OEM Table Load:
[ 0.072282] ACPI: SSDT (null) 0061E (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.075228] ACPI: SSDT 000000003e6e1caa 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.075816] ACPI: Dynamic OEM Table Load:
[ 0.075819] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.075913] ACPI: SSDT 000000003e6e1ff4 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.076497] ACPI: Dynamic OEM Table Load:
[ 0.076501] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.079209] ACPI: Interpreter enabled
[ 0.079213] ACPI: (supports S0 S3 S4 S5)
[ 0.079233] ACPI: Using IOAPIC for interrupt routing
[ 0.083050] ACPI: Power Resource [PUBS] (on)
[ 0.087570] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
[ 0.088886] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.088892] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.088919] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.088922] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.089451] pci_root PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.089849] pci_root PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.089884] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.089888] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.089891] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.089895] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.089898] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.089901] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.089905] pci_root PNP0A08:00: host bridge window [mem 0x3f000000-0xfebfffff] (ignored)
[ 0.089908] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff] (ignored)
[ 0.089911] PCI: root bus 00: using default resources
[ 0.089915] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.089951] PCI host bridge to bus 0000:00
[ 0.089956] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.089958] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.089961] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.089974] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.090037] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[ 0.090053] pci 0000:00:02.0: reg 10: [mem 0xf8100000-0xf81fffff 64bit]
[ 0.090064] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.090071] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.090116] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[ 0.090129] pci 0000:00:02.1: reg 10: [mem 0xf8200000-0xf82fffff 64bit]
[ 0.090205] pci 0000:00:03.0: [8086:2a04] type 00 class 0x078000
[ 0.090223] pci 0000:00:03.0: reg 10: [mem 0xfe226800-0xfe22680f 64bit]
[ 0.090280] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.090303] pci 0000:00:03.2: [8086:2a06] type 00 class 0x010185
[ 0.090319] pci 0000:00:03.2: reg 10: [io 0x1828-0x182f]
[ 0.090327] pci 0000:00:03.2: reg 14: [io 0x180c-0x180f]
[ 0.090335] pci 0000:00:03.2: reg 18: [io 0x1820-0x1827]
[ 0.090343] pci 0000:00:03.2: reg 1c: [io 0x1808-0x180b]
[ 0.090352] pci 0000:00:03.2: reg 20: [io 0x1810-0x181f]
[ 0.090408] pci 0000:00:03.3: [8086:2a07] type 00 class 0x070002
[ 0.090423] pci 0000:00:03.3: reg 10: [io 0x1830-0x1837]
[ 0.090431] pci 0000:00:03.3: reg 14: [mem 0xfe024000-0xfe024fff]
[ 0.090615] pci 0000:00:19.0: [8086:1049] type 00 class 0x020000
[ 0.090675] pci 0000:00:19.0: reg 10: [mem 0xfe000000-0xfe01ffff]
[ 0.090697] pci 0000:00:19.0: reg 14: [mem 0xfe025000-0xfe025fff]
[ 0.090723] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
[ 0.090924] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.090972] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.091104] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
[ 0.091209] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.091341] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
[ 0.091472] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.091524] pci 0000:00:1a.7: reg 10: [mem 0xfe226c00-0xfe226fff]
[ 0.091786] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.091866] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.091918] pci 0000:00:1b.0: reg 10: [mem 0xfe020000-0xfe023fff 64bit]
[ 0.092155] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.092229] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.092492] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.092572] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[ 0.092833] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.092905] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[ 0.093174] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.093257] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
[ 0.093520] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.093602] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[ 0.093856] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.093930] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.094064] pci 0000:00:1d.0: reg 20: [io 0x18a0-0x18bf]
[ 0.094165] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.094304] pci 0000:00:1d.1: reg 20: [io 0x18c0-0x18df]
[ 0.094401] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.094535] pci 0000:00:1d.2: reg 20: [io 0x18e0-0x18ff]
[ 0.094669] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.094729] pci 0000:00:1d.7: reg 10: [mem 0xfe227000-0xfe2273ff]
[ 0.094985] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.095046] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.095270] pci 0000:00:1f.0: [8086:2811] type 00 class 0x060100
[ 0.095466] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.095477] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.095485] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.095492] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.095499] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.095605] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[ 0.095644] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.095672] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.095697] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.095717] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.095736] pci 0000:00:1f.1: reg 20: [io 0x1c00-0x1c0f]
[ 0.095858] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[ 0.095920] pci 0000:00:1f.2: reg 10: [io 0x1c50-0x1c57]
[ 0.095946] pci 0000:00:1f.2: reg 14: [io 0x1c44-0x1c47]
[ 0.095975] pci 0000:00:1f.2: reg 18: [io 0x1c48-0x1c4f]
[ 0.096002] pci 0000:00:1f.2: reg 1c: [io 0x1c40-0x1c43]
[ 0.096031] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
[ 0.096060] pci 0000:00:1f.2: reg 24: [mem 0xfe226000-0xfe2267ff]
[ 0.096227] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.096285] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.096325] pci 0000:00:1f.3: reg 10: [mem 0xfe227400-0xfe2274ff]
[ 0.096422] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
[ 0.096643] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.096651] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.096659] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
[ 0.096675] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
[ 0.096881] pci 0000:03:00.0: [8086:4230] type 00 class 0x028000
[ 0.096954] pci 0000:03:00.0: reg 10: [mem 0xdf3fe000-0xdf3fffff 64bit]
[ 0.097187] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.097331] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.097341] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.097351] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff]
[ 0.097369] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.097515] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.097525] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.097535] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
[ 0.097553] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
[ 0.097692] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.097702] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.097712] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff]
[ 0.097730] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
[ 0.097877] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.097887] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.097897] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff]
[ 0.097912] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
[ 0.098016] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
[ 0.098071] pci 0000:15:00.0: reg 10: [mem 0xf8300000-0xf8300fff]
[ 0.098149] pci 0000:15:00.0: supports D1 D2
[ 0.098152] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.098203] pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010
[ 0.098254] pci 0000:15:00.1: reg 10: [mem 0xf8301000-0xf83017ff]
[ 0.098474] pci 0000:15:00.1: supports D1 D2
[ 0.098477] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.098645] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.098655] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff]
[ 0.098665] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
[ 0.098683] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.098686] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.098690] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.098783] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
[ 0.098792] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
[ 0.098899] ACPI: Invalid Power Resource to register!
[ 0.098906] ACPI: Invalid Power Resource to register!
[ 0.098915] ACPI: Invalid Power Resource to register!
[ 0.098920] ACPI: Invalid Power Resource to register!
[ 0.098923] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.098959] ACPI: Invalid Power Resource to register!
[ 0.098962] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.098992] ACPI: Invalid Power Resource to register!
[ 0.098995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.099030] ACPI: Invalid Power Resource to register!
[ 0.099033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.099066] ACPI: Invalid Power Resource to register!
[ 0.099069] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.099102] ACPI: Invalid Power Resource to register!
[ 0.099105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.099147] ACPI: Invalid Power Resource to register!
[ 0.099153] ACPI: Invalid Power Resource to register!
[ 0.099158] ACPI: Invalid Power Resource to register!
[ 0.099164] ACPI: Invalid Power Resource to register!
[ 0.099174] ACPI: Invalid Power Resource to register!
[ 0.099183] ACPI: Invalid Power Resource to register!
[ 0.099200] ACPI: Invalid Power Resource to register!
[ 0.105667] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.105747] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.105824] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.105901] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.105977] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.106058] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.106134] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.106214] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.107023] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.107030] vgaarb: loaded
[ 0.107032] vgaarb: bridge control possible 0000:00:02.0
[ 0.107137] SCSI subsystem initialized
[ 0.107140] ACPI: bus type scsi registered
[ 0.107153] libata version 3.00 loaded.
[ 0.107153] ACPI: bus type usb registered
[ 0.107153] usbcore: registered new interface driver usbfs
[ 0.107153] usbcore: registered new interface driver hub
[ 0.107153] usbcore: registered new device driver usb
[ 0.107153] PCI: Using ACPI for IRQ routing
[ 0.109434] PCI: pci_cache_line_size set to 64 bytes
[ 0.109562] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.109564] e820: reserve RAM buffer [mem 0x3e6b0000-0x3fffffff]
[ 0.109684] NetLabel: Initializing
[ 0.109686] NetLabel: domain hash size = 128
[ 0.109687] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.109704] NetLabel: unlabeled traffic allowed by default
[ 0.109765] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.109770] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.109776] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.112015] Switching to clocksource hpet
[ 0.121171] pnp: PnP ACPI init
[ 0.121197] ACPI: bus type pnp registered
[ 0.121775] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.121780] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.121783] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.121787] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.121790] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.121793] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.121797] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.121800] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.121803] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.121807] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.121810] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.121813] system 00:00: [mem 0x00100000-0x3effffff] could not be reserved
[ 0.121817] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.121821] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.121827] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.121993] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.121997] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.122012] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.122016] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.122019] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.122022] system 00:01: [io 0x1600-0x165f] could not be reserved
[ 0.122026] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.122029] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.122033] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.122036] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.122040] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.122044] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.122048] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122118] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.122131] pnp 00:03: [dma 4]
[ 0.122155] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.122191] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.122239] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.122279] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.122317] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.122358] pnp 00:08: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[ 0.122810] pnp 00:09: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
[ 0.123401] pnp: PnP ACPI: found 10 devices
[ 0.123404] ACPI: ACPI bus type pnp unregistered
[ 0.130917] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.130923] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.130931] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff]
[ 0.130938] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
[ 0.130948] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.130952] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.130960] pci 0000:00:1c.1: bridge window [mem 0xdc000000-0xdf3fffff]
[ 0.130966] pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.130975] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.130979] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.130987] pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff]
[ 0.130993] pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
[ 0.131012] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.131016] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.131024] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff]
[ 0.131030] pci 0000:00:1c.3: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
[ 0.131039] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.131044] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.131051] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd1ffffff]
[ 0.131057] pci 0000:00:1c.4: bridge window [mem 0xdf500000-0xdf5fffff 64bit pref]
[ 0.131069] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.131073] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.131076] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.131080] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.131086] pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
[ 0.131090] pci 0000:15:00.0: BAR 16: assigned [mem 0x40000000-0x43ffffff]
[ 0.131094] pci 0000:15:00.0: BAR 13: assigned [io 0x7000-0x70ff]
[ 0.131097] pci 0000:15:00.0: BAR 14: assigned [io 0x7400-0x74ff]
[ 0.131100] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.131103] pci 0000:15:00.0: bridge window [io 0x7000-0x70ff]
[ 0.131110] pci 0000:15:00.0: bridge window [io 0x7400-0x74ff]
[ 0.131116] pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref]
[ 0.131123] pci 0000:15:00.0: bridge window [mem 0x40000000-0x43ffffff]
[ 0.131131] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.131135] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff]
[ 0.131142] pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff]
[ 0.131149] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.131210] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 0.131217] pci 0000:00:1e.0: setting latency timer to 64
[ 0.131237] pci 0000:15:00.0: setting latency timer to 64
[ 0.131243] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.131246] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.131249] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.131252] pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff]
[ 0.131255] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
[ 0.131258] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.131261] pci_bus 0000:03: resource 1 [mem 0xdc000000-0xdf3fffff]
[ 0.131263] pci_bus 0000:03: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.131266] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.131269] pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff]
[ 0.131272] pci_bus 0000:04: resource 2 [mem 0xdfb00000-0xdfbfffff 64bit pref]
[ 0.131275] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
[ 0.131278] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd5ffffff]
[ 0.131280] pci_bus 0000:05: resource 2 [mem 0xdf800000-0xdf8fffff 64bit pref]
[ 0.131283] pci_bus 0000:0d: resource 0 [io 0x6000-0x6fff]
[ 0.131286] pci_bus 0000:0d: resource 1 [mem 0xd0000000-0xd1ffffff]
[ 0.131289] pci_bus 0000:0d: resource 2 [mem 0xdf500000-0xdf5fffff 64bit pref]
[ 0.131292] pci_bus 0000:15: resource 0 [io 0x7000-0xafff]
[ 0.131294] pci_bus 0000:15: resource 1 [mem 0xf8300000-0xfbffffff]
[ 0.131297] pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.131300] pci_bus 0000:15: resource 4 [io 0x0000-0xffff]
[ 0.131303] pci_bus 0000:15: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.131306] pci_bus 0000:16: resource 0 [io 0x7000-0x70ff]
[ 0.131308] pci_bus 0000:16: resource 1 [io 0x7400-0x74ff]
[ 0.131311] pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref]
[ 0.131314] pci_bus 0000:16: resource 3 [mem 0x40000000-0x43ffffff]
[ 0.131363] NET: Registered protocol family 2
[ 0.131564] TCP established hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.131649] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.131721] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.131800] TCP: reno registered
[ 0.131806] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.131817] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.131886] NET: Registered protocol family 1
[ 0.131900] pci 0000:00:02.0: Boot video device
[ 0.131950] pci 0000:00:1a.1: power state changed by ACPI to D0
[ 0.132039] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.132097] pci 0000:00:1d.2: power state changed by ACPI to D0
[ 0.132183] PCI: CLS 64 bytes, default 64
[ 0.132232] Unpacking initramfs...
[ 3.776116] Freeing initrd memory: 136144k freed
[ 3.886694] Simple Boot Flag at 0x35 set to 0x1
[ 3.887507] audit: initializing netlink socket (disabled)
[ 3.887525] type=2000 audit(1355702844.886:1): initialized
[ 3.918036] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.919994] VFS: Disk quotas dquot_6.5.2
[ 3.920062] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.920620] msgmni has been set to 1933
[ 3.920698] SELinux: Registering netfilter hooks
[ 3.921276] alg: No test for stdrng (krng)
[ 3.921285] NET: Registered protocol family 38
[ 3.921333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 3.921370] io scheduler noop registered
[ 3.921373] io scheduler deadline registered
[ 3.921385] io scheduler cfq registered (default)
[ 3.921590] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 3.921776] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 3.921960] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 3.922159] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 3.922339] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 3.922504] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 3.922511] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 3.922536] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 3.922539] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 3.922546] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 3.922570] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 3.922576] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 3.922604] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 3.922611] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 3.922635] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 3.922641] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 3.922660] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.922738] pciehp: Using ACPI for slot detection.
[ 3.922779] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2845 ss_vid 17aa ss_did 20ad
[ 3.922803] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 3.922817] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.922819] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.923277] intel_idle: does not run on family 6 model 15
[ 3.923586] ACPI: AC Adapter [AC] (on-line)
[ 3.923689] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 3.923879] ACPI: Lid Switch [LID]
[ 3.923982] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 3.923987] ACPI: Sleep Button [SLPB]
[ 3.924057] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.924061] ACPI: Power Button [PWRF]
[ 3.924279] ACPI: Requesting acpi_cpufreq
[ 3.927738] Monitor-Mwait will be used to enter C-1 state
[ 3.927753] Monitor-Mwait will be used to enter C-2 state
[ 3.927766] Monitor-Mwait will be used to enter C-3 state
[ 3.927788] ACPI: acpi_idle registered with cpuidle
[ 3.934775] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.934778] ACPI: Thermal Zone [THM0] (53 C)
[ 3.936128] thermal LNXTHERM:01: registered as thermal_zone1
[ 3.936131] ACPI: Thermal Zone [THM1] (53 C)
[ 3.936168] GHES: HEST is not enabled!
[ 3.936304] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.957253] 0000:00:03.3: ttyS0 at I/O 0x1830 (irq = 17) is a 16550A
[ 3.957652] Non-volatile memory driver v1.3
[ 3.957655] Linux agpgart interface v0.103
[ 3.957801] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 3.957915] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 3.958543] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 3.958865] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 3.960376] loop: module loaded
[ 3.960496] ahci 0000:00:1f.2: version 3.0
[ 3.960602] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 3.960684] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
[ 3.960689] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 3.960696] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.961239] scsi0 : ahci
[ 3.961365] scsi1 : ahci
[ 3.961509] scsi2 : ahci
[ 3.961598] ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 45
[ 3.961600] ata2: DUMMY
[ 3.961602] ata3: DUMMY
[ 3.961641] ata_piix 0000:00:1f.1: version 2.13
[ 3.961728] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.962173] scsi3 : ata_piix
[ 3.962571] scsi4 : ata_piix
[ 3.962635] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14
[ 3.962638] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15
[ 3.962706] libphy: Fixed MDIO Bus: probed
[ 3.962777] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.962779] ehci-pci: EHCI PCI platform driver
[ 3.962855] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 3.962859] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 3.963088] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.963092] ata5: port disabled--ignoring
[ 3.967051] ehci-pci 0000:00:1a.7: debug port 1
[ 3.967061] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 3.967082] ehci-pci 0000:00:1a.7: irq 22, io mem 0xfe226c00
[ 3.969871] ACPI: Battery Slot [BAT0] (battery present)
[ 3.973022] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.973065] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.973068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.973071] usb usb1: Product: EHCI Host Controller
[ 3.973074] usb usb1: Manufacturer: Linux 3.7.0+ ehci_hcd
[ 3.973077] usb usb1: SerialNumber: 0000:00:1a.7
[ 3.973221] hub 1-0:1.0: USB hub found
[ 3.973227] hub 1-0:1.0: 4 ports detected
[ 3.973406] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 3.973411] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 3.973464] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.977393] ehci-pci 0000:00:1d.7: debug port 1
[ 3.977402] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 3.977419] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfe227000
[ 3.983023] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.983040] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.983043] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.983046] usb usb2: Product: EHCI Host Controller
[ 3.983049] usb usb2: Manufacturer: Linux 3.7.0+ ehci_hcd
[ 3.983052] usb usb2: SerialNumber: 0000:00:1d.7
[ 3.983184] hub 2-0:1.0: USB hub found
[ 3.983189] hub 2-0:1.0: 6 ports detected
[ 3.983389] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.983403] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.983436] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.983440] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.983496] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.983535] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 3.983574] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.983578] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.983581] usb usb3: Product: UHCI Host Controller
[ 3.983583] usb usb3: Manufacturer: Linux 3.7.0+ uhci_hcd
[ 3.983586] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.983697] hub 3-0:1.0: USB hub found
[ 3.983702] hub 3-0:1.0: 2 ports detected
[ 3.983799] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.983804] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.983851] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.983889] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 3.983930] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.983933] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.983936] usb usb4: Product: UHCI Host Controller
[ 3.983939] usb usb4: Manufacturer: Linux 3.7.0+ uhci_hcd
[ 3.983942] usb usb4: SerialNumber: 0000:00:1a.1
[ 3.984073] hub 4-0:1.0: USB hub found
[ 3.984078] hub 4-0:1.0: 2 ports detected
[ 3.984204] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.984209] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.984258] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.984299] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
[ 3.984340] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.984343] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.984346] usb usb5: Product: UHCI Host Controller
[ 3.984349] usb usb5: Manufacturer: Linux 3.7.0+ uhci_hcd
[ 3.984352] usb usb5: SerialNumber: 0000:00:1d.0
[ 3.984455] hub 5-0:1.0: USB hub found
[ 3.984460] hub 5-0:1.0: 2 ports detected
[ 3.984554] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.984559] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.984614] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.984652] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
[ 3.984696] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.984700] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.984703] usb usb6: Product: UHCI Host Controller
[ 3.984706] usb usb6: Manufacturer: Linux 3.7.0+ uhci_hcd
[ 3.984708] usb usb6: SerialNumber: 0000:00:1d.1
[ 3.984829] hub 6-0:1.0: USB hub found
[ 3.984834] hub 6-0:1.0: 2 ports detected
[ 3.984955] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.984959] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.985021] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.985063] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
[ 3.985102] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.985105] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.985108] usb usb7: Product: UHCI Host Controller
[ 3.985111] usb usb7: Manufacturer: Linux 3.7.0+ uhci_hcd
[ 3.985114] usb usb7: SerialNumber: 0000:00:1d.2
[ 3.985226] hub 7-0:1.0: USB hub found
[ 3.985231] hub 7-0:1.0: 2 ports detected
[ 3.985383] usbcore: registered new interface driver usbserial
[ 3.985397] usbcore: registered new interface driver usbserial_generic
[ 3.985406] usbserial: USB Serial support registered for generic
[ 3.985455] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 3.992417] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.992424] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.992534] mousedev: PS/2 mouse device common for all mice
[ 3.992770] rtc_cmos 00:06: RTC can wake from S4
[ 3.992960] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.992994] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.993128] device-mapper: uevent: version 1.0.3
[ 3.993219] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[ 3.993356] cpuidle: using governor ladder
[ 3.993417] cpuidle: using governor menu
[ 3.993793] EFI Variables Facility v0.08 2004-May-17
[ 3.993931] usbcore: registered new interface driver usbhid
[ 3.993933] usbhid: USB HID core driver
[ 3.993961] drop_monitor: Initializing network drop monitor service
[ 3.994079] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.994123] TCP: cubic registered
[ 3.994125] Initializing XFRM netlink socket
[ 3.994264] NET: Registered protocol family 10
[ 3.994469] mip6: Mobile IPv6
[ 3.994472] NET: Registered protocol family 17
[ 3.994485] Key type dns_resolver registered
[ 3.994847] PM: Hibernation image not present or could not be loaded.
[ 3.994859] registered taskstats version 1
[ 3.995527] Magic number: 8:375:102
[ 3.995681] rtc_cmos 00:06: setting system clock to 2012-12-17 00:07:25 UTC (1355702845)
[ 3.997932] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 4.117710] ata4.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4247N, 1.02, max UDMA/33
[ 4.123561] ata4.00: configured for UDMA/33
[ 4.471094] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.472573] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 4.472584] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 4.472860] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 4.472869] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 4.474029] ata1.00: ATA-7: HTS721010G9SA00, MCZIC14V, max UDMA/100
[ 4.474036] ata1.00: 195371568 sectors, multi 16: LBA48
[ 4.476039] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 4.476048] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 4.476322] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 4.476330] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 4.477487] ata1.00: configured for UDMA/100
[ 4.477818] scsi 0:0:0:0: Direct-Access ATA HTS721010G9SA00 MCZI PQ: 0 ANSI: 5
[ 4.478246] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
[ 4.478250] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.478421] sd 0:0:0:0: [sda] Write Protect is off
[ 4.478429] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.478443] ACPI: Invalid Power Resource to register!
[ 4.478696] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.482920] scsi 3:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4247N 1.02 PQ: 0 ANSI: 5
[ 4.488510] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.488513] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.488659] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 4.488824] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.489058] ACPI: Invalid Power Resource to register!
[ 4.499071] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 4.650142] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
[ 4.650146] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.650149] usb 3-1: Product: BCM2045B
[ 4.650152] usb 3-1: Manufacturer: Broadcom Corp
[ 4.721640] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0, board id: 71, fw id: 67352
[ 4.721647] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 4.763596] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[ 4.828343] sda: sda1 sda2 sda3
[ 4.828954] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.830859] Freeing unused kernel memory: 1060k freed
[ 4.831253] Write protecting the kernel read-only data: 12288k
[ 4.841463] Freeing unused kernel memory: 1852k freed
[ 4.853124] Freeing unused kernel memory: 1392k freed
[ 4.953131] dracut: dracut-018-35.git20120510.fc17
[ 5.019810] dracut: rd.luks=0: removing cryptoluks activation
[ 5.040199] udevd[110]: starting version 182
[ 5.081647] [drm] Initialized drm 1.1.0 20060810
[ 5.121693] i915 0000:00:02.0: setting latency timer to 64
[ 5.161703] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 5.161716] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.161718] [drm] Driver supports precise vblank timestamp query.
[ 5.161772] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.289557] [drm] initialized overlay support
[ 5.325892] fbcon: inteldrmfb (fb0) is primary device
[ 5.873872] Console: switching to colour frame buffer device 180x56
[ 5.883115] fb0: inteldrmfb frame buffer device
[ 5.883119] drm: registered panic notifier
[ 5.891680] acpi device:02: registered as cooling_device2
[ 5.891803] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 5.891930] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 5.892175] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.906278] dracut: Starting plymouth daemon
[ 6.091457] dracut: rd.dm=0: removing DM RAID activation
[ 6.109877] dracut: rd.md=0: removing MD RAID activation
[ 6.200840] pata_acpi 0000:00:03.2: enabling device (0004 -> 0005)
[ 6.200885] pata_acpi 0000:00:03.2: setting latency timer to 64
[ 6.201554] ata_generic 0000:00:03.2: setting latency timer to 64
[ 6.202071] scsi5 : ata_generic
[ 6.202168] scsi6 : ata_generic
[ 6.202217] ata6: PATA max UDMA/100 cmd 0x1828 ctl 0x180c bmdma 0x1810 irq 18
[ 6.202220] ata7: PATA max UDMA/100 cmd 0x1820 ctl 0x1808 bmdma 0x1818 irq 18
[ 6.212000] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
[ 6.648933] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 6.648945] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[ 6.648960] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x7000-0xafff]
[ 6.648969] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf8300000-0xfbffffff]
[ 6.648977] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8300000-0xfbffffff:
[ 6.648987] excluding 0xf8300000-0xf86cffff
[ 6.649056] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 6.649065] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xf7ffffff:
[ 6.649092] excluding 0xf4000000-0xf7ffffff
[ 6.649869] firewire_ohci 0000:15:00.1: setting latency timer to 64
[ 6.703147] firewire_ohci 0000:15:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 6.757351] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 6.852603] dracut: Checking ext4: /dev/disk/by-uuid/94addf6f-dd82-48fd-bb1b-809567e7a9a4
[ 6.852794] dracut: issuing e2fsck -a /dev/disk/by-uuid/94addf6f-dd82-48fd-bb1b-809567e7a9a4
[ 7.034837] dracut: /dev/disk/by-uuid/94addf6f-dd82-48fd-bb1b-809567e7a9a4: clean, 178875/2564096 files, 1835864/10240000 blocks
[ 7.035505] dracut: Remounting /dev/disk/by-uuid/94addf6f-dd82-48fd-bb1b-809567e7a9a4 with -o ro
[ 7.044698] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.081228] dracut: Mounted root filesystem /dev/sda3
[ 7.204214] firewire_core 0000:15:00.1: created device fw0: GUID 00016c200015db17, S400
[ 7.257511] dracut: Switching root
[ 7.864883] type=1404 audit(1355702849.367:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 8.129909] SELinux: 2048 avtab hash slots, 99000 rules.
[ 8.151926] SELinux: 2048 avtab hash slots, 99000 rules.
[ 8.347196] SELinux: 9 users, 15 roles, 4112 types, 222 bools, 1 sens, 1024 cats
[ 8.347202] SELinux: 83 classes, 99000 rules
[ 8.352650] SELinux: Permission wake_alarm in class capability2 not defined in policy.
[ 8.352655] SELinux: Permission block_suspend in class capability2 not defined in policy.
[ 8.352661] SELinux: the above unknown classes and permissions will be allowed
[ 8.352671] SELinux: Completing initialization.
[ 8.352673] SELinux: Setting up existing superblocks.
[ 8.352684] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 8.352691] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 8.352713] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 8.352720] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 8.352733] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 8.352762] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 8.353394] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 8.353400] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 8.355833] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 8.355845] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 8.355850] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 8.355873] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 8.355881] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 8.355889] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 8.355918] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 8.357078] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 8.357088] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 8.357122] SELinux: initialized (dev sda3, type ext4), uses xattr
[ 8.377222] type=1403 audit(1355702849.880:3): policy loaded auid=4294967295 ses=4294967295
[ 8.527576] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 8.533098] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.638104] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.643095] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.648093] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.653109] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.658126] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.663175] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.668171] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 9.283536] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 10.471789] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 10.532517] udevd[287]: starting version 182
[ 10.693648] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
[ 10.904555] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 10.904614] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 10.904981] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 10.905369] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 11.849162] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 15.284936] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa4
[ 15.450333] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 15.472549] tpm_tis 00:09: 1.2 TPM (device-id 0x3203, rev-id 9)
[ 16.381198] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[ 16.643653] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20121018/utaddress-251)
[ 16.643663] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.643668] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20121018/utaddress-251)
[ 16.643673] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.643675] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20121018/utaddress-251)
[ 16.643680] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.643682] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 16.673822] iTCO_vendor_support: vendor-support=0
[ 16.687593] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 16.687636] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
[ 16.688002] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.712205] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 17.179774] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa4
[ 17.179952] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 17.390317] cfg80211: Calling CRDA to update world regulatory domain
[ 17.906450] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 17.906460] excluding 0xc0000-0xd3fff 0xe0000-0xfffff
[ 17.906527] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 17.906542] clean.
[ 17.906603] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 17.906618] clean.
[ 18.013936] cfg80211: World regulatory domain updated:
[ 18.013940] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.013943] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.013946] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.013948] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.013950] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.013953] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.113283] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 18.113293] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 18.113295] thinkpad_acpi: ThinkPad BIOS 7LET37WW (1.07 ), EC 7KHT21WW-1.05
[ 18.113297] thinkpad_acpi: Lenovo ThinkPad T61, model 7658CTO
[ 18.113732] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 18.115191] thinkpad_acpi: ACPI backlight control delay disabled
[ 18.115343] thinkpad_acpi: radio switch found; radios are enabled
[ 18.115358] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 18.115360] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 18.118221] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 18.121048] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 18.121191] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 18.122364] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[ 18.914204] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
[ 18.914208] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 18.914260] e1000e 0000:00:19.0: setting latency timer to 64
[ 18.914352] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 18.914413] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 19.219682] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:15:58:84:69:ea
[ 19.219688] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 19.219720] e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
[ 19.788800] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
[ 19.788890] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 19.955811] Adding 5119996k swap on /dev/sda2. Priority:0 extents:1 across:5119996k
[ 21.013483] Bluetooth: Core ver 2.16
[ 21.013523] NET: Registered protocol family 31
[ 21.013525] Bluetooth: HCI device and connection manager initialized
[ 21.013632] Bluetooth: HCI socket layer initialized
[ 21.013637] Bluetooth: L2CAP socket layer initialized
[ 21.013647] Bluetooth: SCO socket layer initialized
[ 21.769159] usbcore: registered new interface driver btusb
[ 22.283711] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:d
[ 22.283716] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 22.283857] iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 22.322885] iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 22.322934] iwl4965 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 22.323047] iwl4965 0000:03:00.0: irq 49 for MSI/MSI-X
[ 22.469150] iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24
[ 22.500392] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 22.597535] cfg80211: Calling CRDA for country: US
[ 22.600837] cfg80211: Regulatory domain changed to country: US
[ 22.600841] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.600843] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 22.600846] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 22.600848] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.600850] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.600853] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.600855] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 25.519948] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 26.679066] nf_conntrack version 0.5.0 (7765 buckets, 31060 max)
[ 28.953233] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.953238] Bluetooth: BNEP filters: protocol multicast
[ 28.953257] Bluetooth: BNEP socket layer initialized
[ 29.398776] Bluetooth: RFCOMM TTY layer initialized
[ 29.398800] Bluetooth: RFCOMM socket layer initialized
[ 29.398801] Bluetooth: RFCOMM ver 1.11
[ 30.116269] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 30.217148] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[ 30.217324] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.459567] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.866700] wlan0: authenticate with 00:19:92:07:18:81
[ 33.884351] wlan0: send auth to 00:19:92:07:18:81 (try 1/3)
[ 33.886083] wlan0: authenticated
[ 33.886280] wlan0: associating with AP with corrupt beacon
[ 33.887053] wlan0: associate with 00:19:92:07:18:81 (try 1/3)
[ 33.891592] wlan0: RX AssocResp from 00:19:92:07:18:81 (capab=0x421 status=0 aid=22)
[ 33.919837] wlan0: associated
[ 33.919921] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 40.021072] fuse init (API version 7.20)
[ 40.046805] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 40.056854] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 62.217458] RPC: Registered named UNIX socket transport module.
[ 62.217463] RPC: Registered udp transport module.
[ 62.217464] RPC: Registered tcp transport module.
[ 62.217466] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 79.222888] wlan0: deauthenticating from 00:19:92:07:18:81 by local choice (reason=3)
[ 79.245447] cfg80211: Calling CRDA to update world regulatory domain
[ 79.257278] cfg80211: World regulatory domain updated:
[ 79.257284] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 79.257287] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 79.257290] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 79.257293] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 79.257295] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 79.257298] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 79.257321] cfg80211: Calling CRDA for country: US
[ 79.261770] cfg80211: Regulatory domain changed to country: US
[ 79.261775] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 79.261778] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 79.261780] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 79.261783] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 79.261786] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 79.261788] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 79.261791] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
next prev parent reply other threads:[~2012-12-16 23:59 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-16 10:43 [PATCH v3 00/10] x86/microcode: Early load microcode Fenghua Yu
2012-12-16 10:43 ` [PATCH v3 01/10] Documentation/x86: " Fenghua Yu
2012-12-16 10:43 ` [PATCH v3 02/10] x86/microcode_intel.h: Define functions and macros for early loading ucode Fenghua Yu
2012-12-16 10:43 ` [PATCH v3 03/10] x86/common.c: Make have_cpuid_p() a global function Fenghua Yu
2012-12-16 10:43 ` [PATCH v3 04/10] x86/microcode_core_early.c: Define interfaces for early loading ucode Fenghua Yu
2012-12-16 17:57 ` Borislav Petkov
2012-12-16 18:09 ` Yu, Fenghua
2012-12-16 18:17 ` Borislav Petkov
2012-12-16 10:43 ` [PATCH v3 05/10] x86/microcode_intel_lib.c: Early update ucode on Intel's CPU Fenghua Yu
2012-12-16 10:43 ` [PATCH v3 06/10] x86/microcode_intel_early.c: " Fenghua Yu
2012-12-16 10:43 ` [PATCH v3 07/10] x86/head_32.S: Early update ucode in 32-bit Fenghua Yu
2012-12-16 10:43 ` [PATCH v3 08/10] x86/head64.c: Early update ucode in 64-bit Fenghua Yu
2012-12-16 17:59 ` Yinghai Lu
2012-12-16 18:38 ` Yu, Fenghua
2012-12-16 21:43 ` H. Peter Anvin
2012-12-16 23:35 ` Yinghai Lu
2012-12-16 23:59 ` Yu, Fenghua [this message]
2012-12-17 0:42 ` Yinghai Lu
2012-12-17 2:02 ` Yinghai Lu
2012-12-17 7:14 ` Yu, Fenghua
2012-12-17 23:30 ` Yu, Fenghua
2012-12-17 23:34 ` Yinghai Lu
2012-12-18 0:32 ` Yu, Fenghua
2012-12-18 0:36 ` Yinghai Lu
2012-12-18 22:55 ` Yu, Fenghua
2012-12-18 22:57 ` Yinghai Lu
2012-12-16 10:43 ` [PATCH v3 09/10] x86/mm/init.c: Copy ucode from initrd image to memory Fenghua Yu
2012-12-16 10:43 ` [PATCH v3 10/10] x86/Kconfig: Configurations to enable/disable the feature Fenghua Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E5A0FA7E9CA944F9D5414FEC6C71220470F81EE@ORSMSX105.amr.corp.intel.com \
--to=fenghua.yu@intel.com \
--cc=andreas.herrmann3@amd.com \
--cc=asit.k.mallick@intel.com \
--cc=borislav.petkov@amd.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=tigran@aivazian.fsnet.co.uk \
--cc=x86@kernel.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).