From: Jan Dittmer <j.dittmer@portrix.net>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.5.65-ac2 -- hda/ide trouble on ICH4
Date: Sat, 22 Mar 2003 17:39:11 +0100 [thread overview]
Message-ID: <3E7C91AF.9070309@portrix.net> (raw)
In-Reply-To: <1048354921.9221.17.camel@irongate.swansea.linux.org.uk>
Alan Cox wrote:
> On Sat, 2003-03-22 at 16:25, Dominik Brodowski wrote:
>
>>>Where is the lock, what does the NMI oopser show ?
>>
>>The lock is directly "below" that line -- and the NMI oopser isn't
>>triggered, AFAICT
>
>
> Anything useful off right-alt scroll-lock etc ?
>
I'm seeing the same problem. VIA KT133A platform, nothing after
partition detection. No NMI-Watchdog, no sysrq magic. Just dead.
Any patch particular I could try to revert?
Jan
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L060AVV207-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SONY CD-RW CRX175E2, ATAPI CD/DVD-ROM drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-104S 012, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 120103200 sectors (61493 MB) w/1821KiB Cache, CHS=7476/255/63,
UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 >
next prev parent reply other threads:[~2003-03-22 16:28 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-22 14:03 2.5.65-ac2 -- hda/ide trouble on ICH4 Dominik Brodowski
2003-03-22 16:35 ` Alan Cox
2003-03-22 16:25 ` Dominik Brodowski
2003-03-22 17:42 ` Alan Cox
2003-03-22 16:39 ` Jan Dittmer [this message]
2003-03-23 1:03 ` Dominik Brodowski
2003-03-23 15:47 ` Alan Cox
2003-03-23 14:59 ` Dominik Brodowski
2003-03-23 18:41 ` Alan Cox
2003-03-23 18:15 ` Dominik Brodowski
2003-03-23 18:25 ` ide: indeed, using list_for_each_entry_safe removes endless looping / hang [Was: Re: 2.5.65-ac2 -- hda/ide trouble on ICH4] Dominik Brodowski
2003-03-23 22:16 ` Jan Dittmer
2003-03-24 11:08 ` PROBLEM: linux-2.5.65-ac3 does not boot whith IDE-drivers Norbert Wolff
2003-03-24 13:54 ` Alan Cox
2003-03-24 9:55 ` ide: indeed, using list_for_each_entry_safe removes endless looping / hang [Was: Re: 2.5.65-ac2 -- hda/ide trouble on ICH4] Alexander Atanasov
2003-03-24 13:59 ` Alan Cox
2003-03-24 16:01 ` Alexander Atanasov
2003-03-24 17:40 ` Alan Cox
2003-03-24 17:24 ` Alexander Atanasov
2003-03-25 4:16 ` Andre Hedrick
2003-03-25 13:59 ` Alan Cox
2003-03-25 20:05 ` Bartlomiej Zolnierkiewicz
2003-03-25 20:24 ` Bartlomiej Zolnierkiewicz
2003-04-03 7:00 ` PATCH:ide_do_reset() fix for 2.5.66 rain.wang
2003-04-03 7:16 ` Jens Axboe
2003-04-03 8:36 ` PATCH RFC :ide_do_reset() " rain.wang
2003-04-10 3:37 ` [rfc][patch]: fix handler race in HDIO_DRIVE_RESET path for 2.5.67-ac1 rain.wang
2003-03-22 22:03 ` [PATCH] Re: 2.5.65-ac2 -- hda/ide trouble on ICH4 Bartlomiej Zolnierkiewicz
2003-03-22 23:27 ` Alan Cox
2003-03-22 22:33 ` Bartlomiej Zolnierkiewicz
2003-03-23 9:11 ` Dominik Brodowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E7C91AF.9070309@portrix.net \
--to=j.dittmer@portrix.net \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).