Linux version 2.4.21-rc1 (root@aeon) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Apr 24 21:45:15 CDT 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fffc000 (usable) BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 131068 zone(0): 4096 pages. zone(1): 126972 pages. zone(2): 0 pages. Kernel command line: ro root=LABEL=/ parport=auto Found and enabled local APIC! Initializing CPU#0 Detected 2533.059 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 5059.37 BogoMIPS Memory: 514880k/524272k available (1750k kernel code, 9004k reserved, 603k data, 120k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2532.9906 MHz. ..... host bus clock speed is 133.3152 MHz. cpu: 0, clocks: 1333152, slice: 666576 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf11b0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router default [1039/0963] at 00:02.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket IA-32 Microcode Update Driver: v1.11 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A lp0: using parport0 (interrupt-driven). Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SiS648 ATA 133 controller ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio hda: Maxtor 6Y080P0, ATA DISK drive hdb: Maxtor 53073H6, ATA DISK drive blk: queue c039fc60, I/O limit 4095Mb (mask 0xffffffff) blk: queue c039fd9c, I/O limit 4095Mb (mask 0xffffffff) hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=9964/255/63, UDMA(133) hdb: attached ide-disk driver. hdb: host protected area => 1 hdb: 60030432 sectors (30736 MB) w/2048KiB Cache, CHS=3736/255/63, UDMA(100) hdc: attached ide-cdrom driver. hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > hdb: hdb1 ide-floppy driver 0.99.newide SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices ppa: Version 2.07 (for Linux 2.4.x) ppa: Found device at ID 6, Attempting to use EPP 32 bit ppa: Communication established with ID 6 using EPP 32 bit scsi1 : Iomega VPI0 (ppa) interface Vendor: IOMEGA Model: ZIP 100 Rev: D.09 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sda at scsi1, channel 0, id 6, lun 0 sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 2 ASC=3a ASCQ= 0 Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0xff 0xfe 0x01 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) ip_conntrack version 2.1 (4095 buckets, 32760 max) - 292 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2002 Netfilter core team RAMDISK: Compressed image found at block 0 Freeing initrd memory: 82k freed VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 120k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xe0848000, IRQ 9 usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] 7001 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-ohci.c: USB OHCI at membase 0xe084a000, IRQ 9 usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] 7001 (#2) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-ohci.c: USB OHCI at membase 0xe084c000, IRQ 9 usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] 7001 (#3) usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected ehci-hcd 00:03.3: PCI device 1039:7002 (Silicon Integrated Systems [SiS]) ehci-hcd 00:03.3: irq 9, pci mem e0876000 usb.c: new USB bus registered, assigned bus number 4 PCI: 00:03.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW. PCI: 00:03.3 PCI cache line size corrected to 128. ehci-hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22 hub.c: USB hub found hub.c: 6 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal Adding Swap: 1004020k swap-space (priority -1) hub.c: new USB device 00:03.0-1, assigned address 2 input0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb1:2.0 sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 2 ASC=3a ASCQ= 0 Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0xff 0xfe 0x01 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. sda: Write Protect is off sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table Device not ready. Make sure there is a disc in the drive. sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 2 ASC=3a ASCQ= 0 Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0xff 0xfe 0x01 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. sda: Write Protect is off sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table Device not ready. Make sure there is a disc in the drive. sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 2 ASC=3a ASCQ= 0 Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0xff 0xfe 0x01 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. sda: Write Protect is off sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal EXT3-fs: mounted filesystem with ordered data mode. sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sns = 70 2 ASC=3a ASCQ= 0 Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0xff 0xfe 0x01 0x00 0x00 0x00 0x00 sda : block size assumed to be 512 bytes, disk size 1GB. sda: Write Protect is off sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table Device not ready. Make sure there is a disc in the drive. ohci1394: $Rev: 866 $ Ben Collins ohci1394_0: Unexpected PCI resource length of 1000! ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[de800000-de8007ff] Max Packet=[2048] ieee1394: Host added: Node[00:1023] GUID[00e018000006d3df] [Linux OHCI-1394] microcode: CPU0 no microcode found! (sig=f24, pflags=4) sis900.c: v1.08.06 9/24/2002 eth0: Realtek RTL8201 PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 9, 00:e0:18:9d:4f:d0. eth0: Media Link On 100mbps full-duplex Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002) eth1: ADMtek Comet rev 17 at 0xe0816000, 00:20:78:04:68:6F, IRQ 9. eth0: no IPv6 routers present 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4349 Thu Mar 27 19:00:02 PST 2003 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Trying generic SiS routines for device id: 0648 agpgart: AGP aperture is 128M @ 0xe0000000 intel8x0: clocking to 48000