linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dominik.Strasser@t-online.de (Dominik Strasser)
To: linux-kernel@vger.kernel.org
Subject: Bootsector corruption
Date: Thu, 01 May 2003 12:44:40 +0200	[thread overview]
Message-ID: <3EB0FA98.2080508@t-online.de> (raw)

Hi,
I experience the following problem which occurs randomly.

After a reboot, the Bootsector is often corrupted. The errors reported 
by lilo differ.
Today I had 99 (invalid second stage index sector).
The problem occurs both on cold and on warm boots.

Re-installing lilo helps (until the next corruption).

I have a 2.4.20 kernel but the probelem occurs since many kernel revisions.

My MoBo is a Gigabyte GA-5AA which is an AT sized ATX board with an ATX 
power supply. It has an ALI1543 chipset.
APM is active, ACPI isn't.

The relevant boot messages are:
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 78
PCI: No IRQ known for interrupt pin A of device 00:0f.0. Please try 
using pci=biosirq.
ALI15X3: chipset revision 193
ALI15X3: not 100% native mode: will probe irqs later
     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DJNA-351520, ATA DISK drive
hdc: JLMS XJ-HD165H, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c03781c4, I/O limit 4095Mb (mask 0xffffffff)
hda: 30033360 sectors (15377 MB) w/430KiB Cache, CHS=1869/255/63, UDMA(33)
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.12

The CD burner is used via ide-scsi:
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
   Vendor: LITE-ON   Model: LTR-48246S        Rev: SS0C
   Type:   CD-ROM                             ANSI SCSI revision: 02

which seems to have some (small) problems which do not affect the 
functionality (burning works flawlessly):
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 64
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 66
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 68
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 70
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 72
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 74
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 76
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 78
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 64
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 66
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 68
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 70
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 72
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 74
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 76
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 78
cdrom: open failed.

Any help is greatly appreciated.


Regards

Dominik


             reply	other threads:[~2003-05-01 10:30 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-05-01 10:44 Dominik Strasser [this message]
2003-05-01 10:55 ` Bootsector corruption John Bradford
     [not found] ` <1051790436.16621.8.camel@localhost>
2003-05-01 14:18   ` Dominik Strasser
2003-05-06 18:31 Unai Garro Arrazola

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3EB0FA98.2080508@t-online.de \
    --to=dominik.strasser@t-online.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).