From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264919AbTF0XHi (ORCPT ); Fri, 27 Jun 2003 19:07:38 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264926AbTF0XHi (ORCPT ); Fri, 27 Jun 2003 19:07:38 -0400 Received: from [62.248.102.66] ([62.248.102.66]:26588 "HELO eposta.kablonet.com.tr") by vger.kernel.org with SMTP id S264919AbTF0XFP (ORCPT ); Fri, 27 Jun 2003 19:05:15 -0400 Message-ID: <3EFCD206.2020501@kablonet.com.tr> Date: Sat, 28 Jun 2003 02:23:50 +0300 From: Onur Kucuk User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.3.1) Gecko/20030514 X-Accept-Language: en, en-us, tr MIME-Version: 1.0 To: Linux Kernel Mailing List Subject: 2.4.21-ac4 & cm9739 & SATA Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, I'm having trouble with -- c-media 9739. 2.4.21-ac4 (and ac3) have the sound working with i810_audio, but there is no mixer control for digital sound. Neither I can control the digital sound with "main volume control" nor I can see the control of digital sound on any mixer (aumix etc) http://www.cmedia.com.tw/driver/Linux/Ac97/cmaudio-034.tar.gz is working, but if you compile the kernel with smp (on this ht system) it freezes the system when you stop playing a digital media (wav mp3 ...). i810_audio works fine with smp. -- SATA SATA (hde) is gone at 2.4.21-ac3 (and ac4), though system see it with 2.4.20 For 2.4.21-ac4, gcc 3.2.2 ; --------------------------- dmesg ------------------------------------- REGION_LIMIT ACPI-0098: *** Error: Method execution failed [\_SB_.PCI0._CRS] (Node c158ccc4), AE_AML_REGION_LIMIT ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xa9 -> IRQ 18) 00:00:1f[A] -> 2-18 -> IRQ 18 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17) 00:00:1f[B] -> 2-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (2-16 -> 0xb9 -> IRQ 16) 00:00:1d[A] -> 2-16 -> IRQ 16 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19) 00:00:1d[B] -> 2-19 -> IRQ 19 Pin 2-18 already programmed IOAPIC[0]: Set PCI routing entry (2-23 -> 0xc9 -> IRQ 23) 00:00:1d[D] -> 2-23 -> IRQ 23 Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20) 00:02:09[A] -> 2-20 -> IRQ 20 IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd9 -> IRQ 21) 00:02:09[B] -> 2-21 -> IRQ 21 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xe1 -> IRQ 22) 00:02:09[C] -> 2-22 -> IRQ 22 Pin 2-23 already programmed Pin 2-21 already programmed Pin 2-20 already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket IA-32 Microcode Update Driver: v1.11 Starting kswapd Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver v1.1.22 [Flags: R/O] SGI XFS with no debug enabled ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1, 8 throttling states) ACPI: Processor [CPU2] (supports C1, 8 throttling states) parport0: PC-style at 0x378 [PCSPP(,...)] i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module vesafb: framebuffer at 0xe8000000, mapped to 0xe080b000, size 3072k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:e710 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A lp0: using parport0 (polling). Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 Fast Ethernet at 0xe0807f00, 00:02:44:07:5f:d0, IRQ 19 eth0: Identified 8139 chip type 'RTL-8139C' Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA hda: MAXTOR 6L040J2, ATA DISK drive blk: queue c04f7f60, I/O limit 4095Mb (mask 0xffffffff) hdc: MAXTOR 6L080J4, ATA DISK drive hdd: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive blk: queue c04f83fc, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=9732/255/63, UDMA(100) hdc: attached ide-disk driver. hdc: host protected area => 1 hdc: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=155114/16/63, UDMA(100) hdd: attached ide-scsi driver. Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > hdc: [PTBL] [9732/255/63] hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 > SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: CD-RW GCE-8400B Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801EB USB2 ehci_hcd 00:1d.7: irq 23, pci mem e0b0cc00 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:1d.7: ehci_start hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 ehci_hcd 00:1d.7: ehci_start hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 00:1d.7: capability 0001 at 68 ehci_hcd 00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW. PCI: 00:1d.7 PCI cache line size corrected to 128. ehci_hcd 00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-12/2.4 hcd.c: 00:1d.7 root hub device address 1 usb.c: kmalloc IF dfe2fb34, numif 1 usb.c: new device strings: Mfr=3, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Manufacturer: Linux 2.4.21-ac4 ehci_hcd Product: Intel Corp. 82801EB USB2 SerialNumber: 00:1d.7 hub.c: USB hub found hub.c: 8 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: individual port over-current protection hub.c: Single TT hub.c: TT requires at most 8 FS bit times hub.c: Port indicators are not supported hub.c: power on to power good time: 0ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RRRRRRRR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface dfe2fb34 host/uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Setting latency timer of device 00:1d.0 to 64 host/uhci.c: USB UHCI at I/O 0xcc00, IRQ 16 usb.c: new USB bus registered, assigned bus number 2 host/uhci.c: detected 2 ports usb.c: kmalloc IF dfe2f9f4, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB UHCI-alt Root Hub SerialNumber: cc00 hub.c: USB hub found hub.c: 2 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface dfe2f9f4 PCI: Setting latency timer of device 00:1d.1 to 64 host/uhci.c: USB UHCI at I/O 0xd000, IRQ 19 usb.c: new USB bus registered, assigned bus number 3 host/uhci.c: detected 2 ports usb.c: kmalloc IF dfe2f8b4, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB UHCI-alt Root Hub SerialNumber: d000 hub.c: USB hub found hub.c: 2 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface dfe2f8b4 PCI: Setting latency timer of device 00:1d.2 to 64 host/uhci.c: USB UHCI at I/O 0xd400, IRQ 18 usb.c: new USB bus registered, assigned bus number 4 host/uhci.c: detected 2 ports host/uhci.c: cc00: suspend_hc usb.c: kmalloc IF dfe2f774, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB UHCI-alt Root Hub SerialNumber: d400 hub.c: USB hub found hub.c: 2 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface dfe2f774 PCI: Setting latency timer of device 00:1d.3 to 64 host/uhci.c: USB UHCI at I/O 0xd800, IRQ 16 usb.c: new USB bus registered, assigned bus number 5 host/uhci.c: detected 2 ports host/uhci.c: d000: suspend_hc usb.c: kmalloc IF dfe2f634, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB UHCI-alt Root Hub SerialNumber: d800 hub.c: USB hub found hub.c: 2 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface dfe2f634 Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. Linux video capture interface: v1.00 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 16384 bind 21845) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. FAT: bogus logical sector size 0 FAT: bogus logical sector size 0 host/uhci.c: d400: suspend_hc host/uhci.c: d800: suspend_hc reiserfs: checking transaction log (device 16:0a) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 352k freed Adding Swap: 1148608k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. MSDOS FS: IO charset iso8859-9 MSDOS FS: Using codepage 857 MSDOS FS: IO charset iso8859-9 MSDOS FS: Using codepage 857 MSDOS FS: IO charset iso8859-9 MSDOS FS: Using codepage 857 MSDOS FS: IO charset iso8859-9 MSDOS FS: Using codepage 857 MSDOS FS: IO charset iso8859-9 MSDOS FS: Using codepage 857 reiserfs: checking transaction log (device 16:0b) ... Using r5 hash to sort names ReiserFS version 3.6.25 NTFS: Warning! NTFS volume version is Win2k+: Mounting read-only bttv: driver version 0.7.104 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is Intel Corp. 82865G/PE/P Processor to I/O Controller bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 02:01.0, irq: 17, latency: 32, mmio: 0xf7efe000 bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0003 bttv0: using: BT878(AVerMedia TVPhone 98) [card=41,autodetected] i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: Avermedia eeprom[0x4811]: tuner=5 radio:yes remote control:yes bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c TV tuner driver registered. tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc2 tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) i2c-core.o: client [Philips PAL_BG (FI1216 and compa] registered to adapter [bt848 #0](pos. 0). bttv0: PLL: 28636363 => 35468950 .. ok bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. blk: queue c04f7f60, I/O limit 4095Mb (mask 0xffffffff) blk: queue c04f83fc, I/O limit 4095Mb (mask 0xffffffff) 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4363 Sat Apr 19 17:46:46 PDT 2003 Intel 810 + AC97 Audio, version 0.24, 01:32:22 Jun 28 2003 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH5 found at IO 0xc400 and 0xc800, MEM 0xfebffa00 and 0xfebff900, IRQ 17 i810: Intel ICH5 mmio at 0xe0ec1a00 and 0xe0ec3900 i810_audio: Primary codec has ID 2 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 2 ac97_codec: AC97 codec, id: CMI97 (CMedia) AC97 codec does not have proper volume support. i810_audio: only 48Khz playback available. i810_audio: AC'97 codec 2, new EID value = 0x05c6 i810_audio: AC'97 codec 2, DAC map configured, total channels = 6 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected an Intel(R) 865G, but could not find the secondary device. Assuming a non-integrated video card. agpgart: Detected Intel(R) 865G chipset agpgart: AGP aperture is 64M @ 0xf8000000 -------------------------- dmesg end --------------------------------- -------------------------- .config ------------------------------------ # # Automatically generated by make menuconfig: don't edit # CONFIG_X86=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set CONFIG_MPENTIUM4=y # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_HAS_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_F00F_WORKS_OK=y # CONFIG_X86_MCE is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_HIGHMEM is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_SMP=y # CONFIG_X86_CLUSTERED_APIC is not set # CONFIG_X86_NUMA is not set # CONFIG_X86_TSC_DISABLE is not set CONFIG_X86_TSC=y CONFIG_HAVE_DEC_LOCK=y # # General setup # CONFIG_NET=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_ISA=y # CONFIG_SCx200 is not set CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_HOTPLUG is not set # CONFIG_PCMCIA is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_IKCONFIG=y CONFIG_PM=y # CONFIG_APM is not set # # ACPI Support # CONFIG_ACPI=y # CONFIG_ACPI_HT_ONLY is not set CONFIG_ACPI_BOOT=y CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y # CONFIG_ACPI_FAN is not set CONFIG_ACPI_PROCESSOR=y # CONFIG_ACPI_THERMAL is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_RELAXED_AML is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_AMIGA is not set # CONFIG_PARPORT_MFC3 is not set # CONFIG_PARPORT_ATARI is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_SUNBPP is not set # CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play configuration # CONFIG_PNP=y CONFIG_ISAPNP=y # CONFIG_PNPBIOS is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_BLK_STATS is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # CONFIG_BLK_DEV_MD is not set # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_BLK_DEV_LVM is not set # CONFIG_BLK_DEV_DM is not set # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set CONFIG_NETFILTER=y CONFIG_NETFILTER_DEBUG=y # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_IRC=m # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_MAC=m CONFIG_IP_NF_MATCH_PKTTYPE=m CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_TCPMSS=m CONFIG_IP_NF_MATCH_HELPER=m CONFIG_IP_NF_MATCH_STATE=m CONFIG_IP_NF_MATCH_CONNTRACK=m # CONFIG_IP_NF_MATCH_UNCLEAN is not set # CONFIG_IP_NF_MATCH_OWNER is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m # CONFIG_IP_NF_TARGET_MIRROR is not set CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_NAT_AMANDA=m # CONFIG_IP_NF_NAT_LOCAL is not set # CONFIG_IP_NF_NAT_SNMP_BASIC is not set CONFIG_IP_NF_NAT_IRC=m CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m # CONFIG_IP_NF_COMPAT_IPCHAINS is not set # CONFIG_IP_NF_COMPAT_IPFWADM is not set # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # # Appletalk devices # # CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_EDP2 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_ISAPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_GENERIC is not set CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_BLK_DEV_ADMA100 is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_AMD74XX_OVERRIDE is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_PDC202XX_BURST is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set CONFIG_BLK_DEV_RZ1000=y # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # CONFIG_BLK_DEV_ATARAID is not set # CONFIG_BLK_DEV_ATARAID_PDC is not set # CONFIG_BLK_DEV_ATARAID_HPT is not set # CONFIG_BLK_DEV_ATARAID_SII is not set # # SCSI support # CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_SR_EXTRA_DEVS=2 # CONFIG_CHR_DEV_SG is not set CONFIG_SCSI_DEBUG_QUEUES=y CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_ATA is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_NCR53C8XX is not set CONFIG_SCSI_SYM53C8XX=y CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set # CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_SUNLANCE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_NET_BCM4400 is not set # CONFIG_CS89x0 is not set # CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_DGRS is not set # CONFIG_DM9102 is not set CONFIG_EEPRO100=y # CONFIG_EEPRO100_PIO is not set # CONFIG_E100 is not set # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_NE3210 is not set # CONFIG_ES3210 is not set # CONFIG_8139CP is not set CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_SUNDANCE_MMIO is not set # CONFIG_TLAN is not set # CONFIG_TC35815 is not set # CONFIG_VIA_RHINE is not set # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_WINBOND_840 is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # # CONFIG_INPUT is not set # CONFIG_INPUT_KEYBDEV is not set # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y # CONFIG_SERIAL_CONSOLE is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # I2C support # CONFIG_I2C=y CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PHILIPSPAR is not set # CONFIG_I2C_ELV is not set # CONFIG_I2C_VELLEMAN is not set # CONFIG_SCx200_I2C is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_CHARDEV is not set # CONFIG_I2C_PROC is not set # # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=y CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # CONFIG_MK712_MOUSE is not set # # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # CONFIG_QIC02_TAPE is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_IPMI_PANIC_EVENT is not set # CONFIG_IPMI_DEVICE_INTERFACE is not set # CONFIG_IPMI_KCS is not set # CONFIG_IPMI_WATCHDOG is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_SCx200_GPIO is not set # CONFIG_AMD_RNG is not set # CONFIG_INTEL_RNG is not set # CONFIG_AMD_PM768 is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=m CONFIG_AGP_INTEL=y CONFIG_AGP_I810=y CONFIG_AGP_VIA=y CONFIG_AGP_AMD=y # CONFIG_AGP_AMD_8151 is not set CONFIG_AGP_SIS=y CONFIG_AGP_ALI=y # CONFIG_AGP_SWORKS is not set CONFIG_AGP_NVIDIA=y # CONFIG_DRM is not set # CONFIG_MWAVE is not set # # Multimedia devices # CONFIG_VIDEO_DEV=y # # Video For Linux # CONFIG_VIDEO_PROC_FS=y # CONFIG_I2C_PARPORT is not set CONFIG_VIDEO_BT848=m # CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_BWQCAM is not set # CONFIG_VIDEO_CQCAM is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_ZORAN_BUZ is not set # CONFIG_VIDEO_ZORAN_DC10 is not set # CONFIG_VIDEO_ZORAN_LML33 is not set # CONFIG_VIDEO_ZR36120 is not set # CONFIG_VIDEO_MEYE is not set # # Radio Adapters # # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set # CONFIG_RADIO_RTRACK2 is not set # CONFIG_RADIO_AZTECH is not set # CONFIG_RADIO_GEMTEK is not set # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set # CONFIG_RADIO_MIROPCM20 is not set # CONFIG_RADIO_MIROPCM20_RDS is not set # CONFIG_RADIO_SF16FMI is not set # CONFIG_RADIO_SF16FMR2 is not set # CONFIG_RADIO_TERRATEC is not set # CONFIG_RADIO_TRUST is not set # CONFIG_RADIO_TYPHOON is not set # CONFIG_RADIO_ZOLTRIX is not set # # File systems # # CONFIG_QUOTA is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set # CONFIG_QIFACE_COMPAT is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BEFS_DEBUG is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BFS_FS is not set CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_ISO9660_FS=y # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set # CONFIG_JFS_FS is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set CONFIG_NTFS_FS=y # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set CONFIG_XFS_FS=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_ROOT_NFS is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_TCP is not set CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_SMB_FS=y # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set # CONFIG_ZISOFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-9" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set CONFIG_NLS_CODEPAGE_857=y # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set CONFIG_NLS_ISO8859_9=y # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set # # Frame-buffer support # CONFIG_FB=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FB_RIVA is not set # CONFIG_FB_CLGEN is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CYBER2000 is not set CONFIG_FB_VESA=y # CONFIG_FB_VGA16 is not set # CONFIG_FB_HGA is not set CONFIG_VIDEO_SELECT=y # CONFIG_FB_MATROX is not set # CONFIG_FB_ATY is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set CONFIG_FBCON_ADVANCED=y # CONFIG_FBCON_MFB is not set # CONFIG_FBCON_CFB2 is not set # CONFIG_FBCON_CFB4 is not set CONFIG_FBCON_CFB8=y CONFIG_FBCON_CFB16=y CONFIG_FBCON_CFB24=y CONFIG_FBCON_CFB32=y # CONFIG_FBCON_AFB is not set # CONFIG_FBCON_ILBM is not set # CONFIG_FBCON_IPLAN2P2 is not set # CONFIG_FBCON_IPLAN2P4 is not set # CONFIG_FBCON_IPLAN2P8 is not set # CONFIG_FBCON_MAC is not set # CONFIG_FBCON_VGA_PLANES is not set # CONFIG_FBCON_VGA is not set # CONFIG_FBCON_HGA is not set # CONFIG_FBCON_FONTWIDTH8_ONLY is not set # CONFIG_FBCON_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Sound # CONFIG_SOUND=m # CONFIG_SOUND_ALI5455 is not set # CONFIG_SOUND_BT878 is not set CONFIG_SOUND_CMPCI=m # CONFIG_SOUND_CMPCI_FM is not set # CONFIG_SOUND_CMPCI_MIDI is not set # CONFIG_SOUND_CMPCI_JOYSTICK is not set CONFIG_SOUND_CMPCI_CM8738=y # CONFIG_SOUND_CMPCI_SPDIFINVERSE is not set # CONFIG_SOUND_CMPCI_SPDIFLOOP is not set CONFIG_SOUND_CMPCI_SPEAKERS=2 # CONFIG_SOUND_EMU10K1 is not set # CONFIG_MIDI_EMU10K1 is not set # CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_CS4281 is not set # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ESSSOLO1 is not set # CONFIG_SOUND_MAESTRO is not set # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_FORTE is not set CONFIG_SOUND_ICH=m # CONFIG_SOUND_RME96XX is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_MIDI_VIA82CXXX is not set CONFIG_SOUND_OSS=m # CONFIG_SOUND_TRACEINIT is not set # CONFIG_SOUND_DMAP is not set # CONFIG_SOUND_AD1816 is not set # CONFIG_SOUND_AD1889 is not set # CONFIG_SOUND_SGALAXY is not set # CONFIG_SOUND_ADLIB is not set # CONFIG_SOUND_ACI_MIXER is not set # CONFIG_SOUND_CS4232 is not set # CONFIG_SOUND_SSCAPE is not set # CONFIG_SOUND_GUS is not set CONFIG_SOUND_VMIDI=m # CONFIG_SOUND_TRIX is not set # CONFIG_SOUND_MSS is not set # CONFIG_SOUND_MPU401 is not set # CONFIG_SOUND_NM256 is not set # CONFIG_SOUND_MAD16 is not set # CONFIG_SOUND_PAS is not set # CONFIG_PAS_JOYSTICK is not set # CONFIG_SOUND_PSS is not set # CONFIG_SOUND_SB is not set # CONFIG_SOUND_AWE32_SYNTH is not set # CONFIG_SOUND_KAHLUA is not set # CONFIG_SOUND_WAVEFRONT is not set # CONFIG_SOUND_MAUI is not set # CONFIG_SOUND_YM3812 is not set # CONFIG_SOUND_OPL3SA1 is not set # CONFIG_SOUND_OPL3SA2 is not set # CONFIG_SOUND_YMFPCI is not set # CONFIG_SOUND_YMFPCI_LEGACY is not set # CONFIG_SOUND_UART6850 is not set # CONFIG_SOUND_AEDSP16 is not set # CONFIG_SOUND_TVMIXER is not set # CONFIG_SOUND_AD1980 is not set # # USB support # CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_UHCI_ALT=y # CONFIG_USB_OHCI is not set # CONFIG_USB_AUDIO is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_BLUETOOTH is not set # CONFIG_USB_MIDI is not set CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_HID is not set # CONFIG_USB_HIDINPUT is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_DC2XX is not set # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_PWC is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_DABUSB is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_CATC is not set # CONFIG_USB_AX8817X is not set # CONFIG_USB_CDCETHER is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_TIGL is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # # Bluetooth support # # CONFIG_BLUEZ is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_FRAME_POINTER=y CONFIG_DEBUG_HIGHMEM=y CONFIG_DEBUG_SLAB=y CONFIG_DEBUG_IOVIRT=y CONFIG_MAGIC_SYSRQ=y CONFIG_PANIC_MORSE=y CONFIG_DEBUG_SPINLOCK=y # # Library routines # CONFIG_CRC32=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -------------------------- .config end -------------------------------- -------------------------- lspci -v ----------------------------------- 00:00.0 Host bridge: Intel Corp.: Unknown device 2570 (rev 02) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7280 Flags: bus master, fast devsel, latency 0 Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: [e4] #09 [2106] Capabilities: [a0] AGP version 3.0 00:01.0 PCI bridge: Intel Corp.: Unknown device 2571 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: fc900000-fe9fffff Prefetchable memory behind bridge: e7e00000-f7dfffff 00:1d.0 USB Controller: Intel Corp.: Unknown device 24d2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7280 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at cc00 [size=32] 00:1d.1 USB Controller: Intel Corp.: Unknown device 24d4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7280 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at d000 [size=32] 00:1d.2 USB Controller: Intel Corp.: Unknown device 24d7 (rev 02) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7280 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at d400 [size=32] 00:1d.3 USB Controller: Intel Corp.: Unknown device 24de (rev 02) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7280 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at d800 [size=32] 00:1d.7 USB Controller: Intel Corp.: Unknown device 24dd (rev 02) (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7280 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at febffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] #0a [20a0] 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev c2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: f7e00000-f7efffff 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24d0 (rev 02) Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corp.: Unknown device 24db (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7280 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at I/O ports at I/O ports at I/O ports at I/O ports at fc00 [size=16] Memory at 20000000 (32-bit, non-prefetchable) [size=1K] 00:1f.2 IDE interface: Intel Corp.: Unknown device 24d1 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Intel Corp.: Unknown device 24d1 Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 18 I/O ports at ec00 [size=8] I/O ports at e800 [size=4] I/O ports at e400 [size=8] I/O ports at e000 [size=4] I/O ports at dc00 [size=16] 00:1f.3 SMBus: Intel Corp.: Unknown device 24d3 (rev 02) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7280 Flags: medium devsel, IRQ 17 I/O ports at 0c00 [size=32] 00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24d5 (rev 02) Subsystem: Micro-Star International Co., Ltd.: Unknown device 7280 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at c800 [size=256] I/O ports at c400 [size=64] Memory at febffa00 (32-bit, non-prefetchable) [size=512] Memory at febff900 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA]) Subsystem: Asustek Computer, Inc.: Unknown device 80bb Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 16 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at e8000000 (32-bit, prefetchable) [size=128M] Expansion ROM at fe9e0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [44] AGP version 3.0 02:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) Subsystem: Avermedia Technologies Inc: Unknown device 0003 Flags: bus master, medium devsel, latency 32, IRQ 17 Memory at f7efe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 02:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Subsystem: Avermedia Technologies Inc: Unknown device 0003 Flags: bus master, medium devsel, latency 32, IRQ 17 Memory at f7eff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Surecom Technology EP-320X-R Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at bc00 [size=256] Memory at feafff00 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 -------------------------- lspci -v end ------------------------------- Regards, Onur Kucuk