From: Wilfried Weissmann <Wilfried.Weissmann@gmx.at>
To: Wil Reichert <wilreichert@yahoo.com>,
Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: highpoint driver problem, 2.4.21-ac4
Date: Mon, 07 Jul 2003 19:41:10 +0200 [thread overview]
Message-ID: <3F09B0B6.5060605@gmx.at> (raw)
In-Reply-To: 20030706132507.240683d1.wilreichert@yahoo.com
[-- Attachment #1: Type: text/plain, Size: 1084 bytes --]
Wil Reichert wrote:
>> could you try the attachted patch, and report if this changes
>> something?
>
>
> Applied patch & rebuilt with hpt366 as a module. No more oops, dmesg
> prints the following:
>
> HPT372A: IDE controller at PCI slot 01:0b.0 HPT372A: chipset revision
> 2 HPT372A: not 100% native mode: will probe irqs later hpt: HPT372N
> detected, using 372N timing. FREQ: 126 PLL: 45 hpt: no known IDE
> timings, disabling DMA. hpt: no known IDE timings, disabling DMA.
it looks like the controller is detected as a HPT372N instead of a
HPT372A. the attached patch disables this check.
>
> It has 2 drives attached to it, neither seems to be found.
>
> Other things: the 2.5.xx seems to work ok and my board supports some
> 'RAID 1.5' which seems to be nothing more than PR crap and some
> firmware hacks. Could that cause problems?
raid 15 is a mirrored raid 5, which should provide high availability and
good performance (even in the case of a disk failure). but in this case
it is nothing more than a software solution. ;)
>
> Wil
bye,
wilfried
[-- Attachment #2: linux-2.4.21-ac4-ignore-hpt372n.patch --]
[-- Type: text/plain, Size: 372 bytes --]
--- linux/drivers/ide/pci/hpt366.c.orig 2003-07-07 19:19:25.000000000 +0200
+++ linux/drivers/ide/pci/hpt366.c 2003-07-07 19:19:55.000000000 +0200
@@ -889,8 +889,10 @@ static int __init init_hpt37x(struct pci
did = inb(dmabase + 0x22);
rid = inb(dmabase + 0x28);
+#if 0
if((did == 4 && rid == 6) || (did == 5 && rid > 1))
is_372n = 1;
+#endif
}
/*
next prev parent reply other threads:[~2003-07-07 17:26 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4V9E.47E.39@gated-at.bofh.it>
[not found] ` <4V9E.47E.37@gated-at.bofh.it>
[not found] ` <4WyE.5oC.19@gated-at.bofh.it>
2003-07-03 19:21 ` highpoint driver problem, 2.4.21-ac4 Wilfried Weissmann
[not found] ` <20030703184427.3cb71051.wilreichert@yahoo.com>
2003-07-05 22:07 ` Wilfried Weissmann
[not found] ` <20030706132507.240683d1.wilreichert@yahoo.com>
2003-07-07 17:41 ` Wilfried Weissmann [this message]
2003-07-07 17:54 ` Wilfried Weissmann
[not found] <4FHn.4MD.1@gated-at.bofh.it>
2003-07-02 18:50 ` Wilfried Weissmann
2003-07-02 20:36 ` Wil Reichert
2003-07-02 2:27 Wil Reichert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F09B0B6.5060605@gmx.at \
--to=wilfried.weissmann@gmx.at \
--cc=linux-kernel@vger.kernel.org \
--cc=wilreichert@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).