From: Juan Pedro Paredes Caballero <juampe@iquis.com>
To: kernel <linux-kernel@vger.kernel.org>
Subject: linux-2.6.0-test1: PCMCIA SanDisk, Card Module ide_cs cannot be unloaded due to unsafe usage
Date: Fri, 18 Jul 2003 09:29:31 +0200 [thread overview]
Message-ID: <3F17A1DB.10504@iquis.com> (raw)
When I enter my SanDisk Card
hde: SanDisk SDCFB-16, CFA DISK drive
ide2 at 0x100-0x107,0x10e on irq 3
hde: max request size: 128KiB
hde: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hde: task_no_data_intr: error=0x04 { DriveStatusError }
hde: 31360 sectors (16 MB) w/1KiB Cache, CHS=490/2/32
/dev/ide/host2/bus0/target0/lun0: p1
/dev/ide/host2/bus0/target0/lun0: p1
devfs_mk_bdev: could not append to parent for
ide/host2/bus0/target0/lun0/part1
kobject_register failed for hde1 (-17)
Call Trace:
[kobject_register+89/96] kobject_register+0x59/0x60
[register_disk+327/384] register_disk+0x147/0x180
[add_disk+80/96] add_disk+0x50/0x60
[exact_match+0/16] exact_match+0x0/0x10
[exact_lock+0/32] exact_lock+0x0/0x20
[idedisk_attach+284/448] idedisk_attach+0x11c/0x1c0
[ata_attach+65/208] ata_attach+0x41/0xd0
[ideprobe_init+254/285] ideprobe_init+0xfe/0x11d
[set_cis_map+64/288] set_cis_map+0x40/0x120
[ide_probe_module+19/32] ide_probe_module+0x13/0x20
[ide_register_hw+334/384] ide_register_hw+0x14e/0x180
[__crc_parport_ieee1284_epp_write_data+1417244/6889293]
idecs_register+0x58/0x70 [ide_cs]
[CardServices+533/862] CardServices+0x215/0x35e
[__crc_parport_ieee1284_epp_write_data+1418579/6889293]
ide_config+0x51f/0x840 [ide_cs]
[scheduler_tick+94/768] scheduler_tick+0x5e/0x300
[update_process_times+70/96] update_process_times+0x46/0x60
[tasklet_action+70/112] tasklet_action+0x46/0x70
[do_IRQ+197/240] do_IRQ+0xc5/0xf0
[common_interrupt+24/32] common_interrupt+0x18/0x20
[read_cis_cache+134/384] read_cis_cache+0x86/0x180
[pcmcia_get_next_tuple+588/688] pcmcia_get_next_tuple+0x24c/0x2b0
[pcmcia_get_first_tuple+188/368] pcmcia_get_first_tuple+0xbc/0x170
[yenta_set_mem_map+417/496] yenta_set_mem_map+0x1a1/0x1f0
[scheduler_tick+94/768] scheduler_tick+0x5e/0x300
[update_process_times+70/96] update_process_times+0x46/0x60
[tasklet_action+70/112] tasklet_action+0x46/0x70
[do_IRQ+197/240] do_IRQ+0xc5/0xf0
[common_interrupt+24/32] common_interrupt+0x18/0x20
[read_cis_cache+134/384] read_cis_cache+0x86/0x180
[pcmcia_get_next_tuple+588/688] pcmcia_get_next_tuple+0x24c/0x2b0
[pcmcia_get_first_tuple+188/368] pcmcia_get_first_tuple+0xbc/0x170
[read_cis_cache+244/384] read_cis_cache+0xf4/0x180
[pcmcia_get_next_tuple+588/688] pcmcia_get_next_tuple+0x24c/0x2b0
[pcmcia_validate_cis+307/528] pcmcia_validate_cis+0x133/0x210
[__find_get_block+108/192] __find_get_block+0x6c/0xc0
[create_virtual_node+838/1328] create_virtual_node+0x346/0x530
[pathrelse_and_restore+67/80] pathrelse_and_restore+0x43/0x50
[__crc_parport_ieee1284_epp_write_data+1419775/6889293]
ide_event+0x6b/0x110 [ide_cs]
[pcmcia_register_client+517/576] pcmcia_register_client+0x205/0x240
[yenta_set_mem_map+417/496] yenta_set_mem_map+0x1a1/0x1f0
[reiserfs_cut_from_item+421/1168] reiserfs_cut_from_item+0x1a5/0x490
[bh_lru_install+164/224] bh_lru_install+0xa4/0xe0
[CardServices+430/862] CardServices+0x1ae/0x35e
[__crc_parport_ieee1284_epp_write_data+1416901/6889293]
ide_attach+0x111/0x150 [ide_cs]
[__crc_parport_ieee1284_epp_write_data+1419668/6889293]
ide_event+0x0/0x110 [ide_cs]
[get_pcmcia_driver+55/80] get_pcmcia_driver+0x37/0x50
[bind_request+216/432] bind_request+0xd8/0x1b0
[ds_ioctl+1388/1696] ds_ioctl+0x56c/0x6a0
[sock_def_readable+95/112] sock_def_readable+0x5f/0x70
[unix_dgram_sendmsg+1011/1232] unix_dgram_sendmsg+0x3f3/0x4d0
[buffered_rmqueue+178/336] buffered_rmqueue+0xb2/0x150
[sock_sendmsg+158/208] sock_sendmsg+0x9e/0xd0
[do_anonymous_page+273/480] do_anonymous_page+0x111/0x1e0
[wake_up_inode+15/48] wake_up_inode+0xf/0x30
[buffered_rmqueue+178/336] buffered_rmqueue+0xb2/0x150
[zap_pmd_range+75/112] zap_pmd_range+0x4b/0x70
[unmap_page_range+75/144] unmap_page_range+0x4b/0x90
[unmap_vmas+255/576] unmap_vmas+0xff/0x240
[unmap_region+149/224] unmap_region+0x95/0xe0
[unmap_vma+72/144] unmap_vma+0x48/0x90
[unmap_vma_list+31/48] unmap_vma_list+0x1f/0x30
[do_munmap+304/384] do_munmap+0x130/0x180
[sys_ioctl+201/592] sys_ioctl+0xc9/0x250
[sys_munmap+68/112] sys_munmap+0x44/0x70
[syscall_call+7/11] syscall_call+0x7/0xb
Module ide_cs cannot be unloaded due to unsafe usage in
include/linux/module.h:482
ide-cs: hde: Vcc = 3.3, Vpp = 0.0
next reply other threads:[~2003-07-18 7:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-18 7:29 Juan Pedro Paredes Caballero [this message]
2003-07-18 15:01 ` linux-2.6.0-test1: ide_cs cannot be unloaded due to unsafe usage in include/linux/module.h:482 Juan Pedro Paredes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F17A1DB.10504@iquis.com \
--to=juampe@iquis.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).