linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jindrich Makovicka <makovick@kmlinux.fjfi.cvut.cz>
To: linux-kernel@vger.kernel.org
Subject: via-rhine broken in 2.4.22-pre8 and 2.6.0-pre1&2
Date: Mon, 28 Jul 2003 14:22:58 +0200	[thread overview]
Message-ID: <3F2515A2.8040008@kmlinux.fjfi.cvut.cz> (raw)

[please cc:, I am not a subscriber]

Hello,

I recently tried 2.6.0-test1, 2.6.0-test2, 2.4.22-pre6 and 2.4.22-pre8, 
and via-rhine seems broken in all of them. Network connection doesn't 
work, and only the timeout messages appear:

NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
eth0: Setting full-duplex based on MII #1 link partner capability of 41e1.

2.4.21 still works fine.

lspci -v:

00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge
	Subsystem: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge
	Flags: bus master, 66Mhz, medium devsel, latency 8
	Memory at d0000000 (32-bit, prefetchable) [size=128M]
	Capabilities: [a0] AGP version 2.0
	Capabilities: [c0] Power Management version 2

00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge (prog-if 00 
[Normal decode])
	Flags: bus master, 66Mhz, medium devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: e0000000-e1ffffff
	Prefetchable memory behind bridge: d8000000-dfffffff
	Capabilities: [80] Power Management version 2

00:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
	Subsystem: Creative Labs CT4850 SBLive! Value
	Flags: bus master, medium devsel, latency 32, IRQ 18
	I/O ports at a000 [size=32]
	Capabilities: [dc] Power Management version 1

00:0c.1 Input device controller: Creative Labs SB Live! MIDI/Game Port 
(rev 08)
	Subsystem: Creative Labs Gameport Joystick
	Flags: bus master, medium devsel, latency 32
	I/O ports at a400 [size=8]
	Capabilities: [dc] Power Management version 1

00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video 
Capture (rev 11)
	Flags: bus master, medium devsel, latency 32, IRQ 19
	Memory at e3001000 (32-bit, prefetchable) [size=4K]
	Capabilities: [44] Vital Product Data
	Capabilities: [4c] Power Management version 2

00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture 
(rev 11)
	Flags: bus master, medium devsel, latency 32, IRQ 19
	Memory at e3000000 (32-bit, prefetchable) [size=4K]
	Capabilities: [44] Vital Product Data
	Capabilities: [4c] Power Management version 2

00:0e.0 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07)
	Subsystem: Triones Technologies, Inc.: Unknown device 0001
	Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 17
	I/O ports at a800 [size=8]
	I/O ports at ac00 [size=4]
	I/O ports at b000 [size=8]
	I/O ports at b400 [size=4]
	I/O ports at b800 [size=256]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [60] Power Management version 2

00:0e.1 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07)
	Subsystem: Triones Technologies, Inc.: Unknown device 0001
	Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 17
	I/O ports at bc00 [size=8]
	I/O ports at c000 [size=4]
	I/O ports at c400 [size=8]
	I/O ports at c800 [size=4]
	I/O ports at cc00 [size=256]
	Capabilities: [60] Power Management version 2

00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 
[UHCI])
	Subsystem: Unknown device 1695:3005
	Flags: bus master, medium devsel, latency 32, IRQ 21
	I/O ports at d000 [size=32]
	Capabilities: [80] Power Management version 2

00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 
[UHCI])
	Subsystem: Unknown device 1695:3005
	Flags: bus master, medium devsel, latency 32, IRQ 21
	I/O ports at d400 [size=32]
	Capabilities: [80] Power Management version 2

00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 
[UHCI])
	Subsystem: Unknown device 1695:3005
	Flags: bus master, medium devsel, latency 32, IRQ 21
	I/O ports at d800 [size=32]
	Capabilities: [80] Power Management version 2

00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 
20 [EHCI])
	Subsystem: Unknown device 1695:3005
	Flags: bus master, medium devsel, latency 32, IRQ 19
	Memory at e3002000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2

00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
	Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge
	Flags: bus master, stepping, medium devsel, latency 0
	Capabilities: [c0] Power Management version 2

00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus 
Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
	Subsystem: Unknown device 1695:3005
	Flags: bus master, medium devsel, latency 32
	I/O ports at dc00 [size=16]
	Capabilities: [c0] Power Management version 2

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] 
(rev 74)
	Subsystem: Unknown device 1695:3005
	Flags: bus master, medium devsel, latency 32, IRQ 23
	I/O ports at e000 [size=256]
	Memory at e3003000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [40] Power Management version 2

01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 
MX/MX 400] (rev b2) (prog-if 00 [VGA])
	Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 16
	Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
	Memory at d8000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [60] Power Management version 2
	Capabilities: [44] AGP version 2.0

-- 
Jindrich Makovicka


             reply	other threads:[~2003-07-28 12:07 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-07-28 12:22 Jindrich Makovicka [this message]
2003-07-28 18:32 ` via-rhine broken in 2.4.22-pre8 and 2.6.0-pre1&2 Roger Luethi
2003-07-29  7:57   ` Claas Langbehn
2003-07-29  9:51 ` Stefan Voelkel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3F2515A2.8040008@kmlinux.fjfi.cvut.cz \
    --to=makovick@kmlinux.fjfi.cvut.cz \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).