Kevin P. Fleming wrote:
> Peter Lieverdink wrote:
> 
>> When I enable ACPI on 2.6.0-test4 (also on 2.6.0-test3-*), the kernel no
>> longer recognises my IDE controller and drops down to PIO mode for
>> harddisk access. Additionally, USB devices don't get detected.
> 
> I'm running -test4 here with ACPI and have no trouble with USB devices.

I'm running test4 here with ACPI and have no USB following a call trace
with "IRQ 20: nobody cared". ACPI seems to make odd reports. I've been
having this problem since 2.5.70'ish. Posted numerous times, but nobody
seems to care about it. I also have a PS/2 mouse detection when I have
no mice attached to my system.

>> The system is an Athlon 2400+ on a Gibabyte GA-7VAXP mainboard. (KT400)
> 
> My system is an Athlon 1000 on an MSI KT266-based board.

I have a Pentium 4 2.53 GHz on a Asus P4S8X mainboard.

-David

PS. dmesg is attached with ACPI debug and USB debug enabled.