2.6.0-test4: Hang in i8042_init

2.6.0-test4: Hang in i8042_init

[Nick Piggin]

[-- Attachment #1: Type: text/plain, Size: 177 bytes --]

Is what I am getting. Last line is something like input: PC Speaker
(followed by the initcall).

dmseg and lspci from a working kernel attached. Let me know if I can
do more.



[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 8191 bytes --]

Linux version 2.5.73-mm2 (npiggin@didi) (gcc version 3.3 (Debian)) #2 Sat Jun 28 17:14:05 EST 2003
Video mode to be used for restore is 30c
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
 BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ffee0000 - 00000000fff0ffff (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 61424 pages, LIFO batch:14
  HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v000 AMI                        ) @ 0x000fa0a0
ACPI: RSDT (v001 AMIINT SiS645XX 00000.00016) @ 0x0fff0000
ACPI: FADT (v001 AMIINT SiS645XX 00000.00017) @ 0x0fff0030
ACPI: DSDT (v001    SiS      645 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: MADT not present
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=linuxold ro root=306
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1991.939 MHz processor.
Console: colour VGA+ 132x60
Calibrating delay loop... 3971.48 BogoMIPS
Memory: 255888k/262080k available (1754k kernel code, 5476k reserved, 583k data, 304k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU:     After generic, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1991.9674 MHz.
..... host bus clock speed is 99.5982 MHz.
mtrr: v2.0 (20020519)
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=2
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]:   1 bvecs: 256 entries (12 bytes)
biovec pool[1]:   4 bvecs: 256 entries (48 bytes)
biovec pool[2]:  16 bvecs: 256 entries (192 bytes)
biovec pool[3]:  64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
ACPI: Subsystem revision 20030619
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 *12 14 15)
Linux Plug and Play Support v0.96 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7270
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x5eab, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
pty: 256 Unix98 ptys configured
Machine check exception polling timer started.
Enabling SEP on CPU 0
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
sis900.c: v1.08.06 9/24/2002
eth0: VIA 6103 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 5, 00:0a:e6:5f:ac:b1.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST360015A, ATA DISK drive
anticipatory scheduling elevator
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: LTN526S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: host protected area => 1
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63, UDMA(100)
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > hda3 hda4
ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci-hcd: block sizes: ed 64 td 64
ohci-hcd 0000:00:03.0: Silicon Integrated S 7001
ohci-hcd 0000:00:03.0: irq 12, pci mem d0807000
ohci-hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
ohci-hcd 0000:00:03.1: Silicon Integrated S 7001 (#2)
ohci-hcd 0000:00:03.1: irq 5, pci mem d0809000
ohci-hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
hub 2-0:0: USB hub found
hub 2-0:0: 2 ports detected
ohci-hcd 0000:00:03.2: Silicon Integrated S 7001 (#3)
ohci-hcd 0000:00:03.2: irq 11, pci mem d080b000
ohci-hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
hub 3-0:0: USB hub found
hub 3-0:0: 2 ports detected
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: PC Speaker
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 304k freed
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
hub 1-0:0: new USB device on port 1, assigned address 2
input: USB HID v1.00 Mouse [A4Tech USB Mouse] on usb-0000:00:03.0-1
Adding 497972k swap on /dev/hda10.  Priority:-1 extents:1
EXT3 FS on hda6, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: Media Link On 100mbps full-duplex 
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.11

[-- Attachment #3: lspci --]
[-- Type: text/plain, Size: 3415 bytes --]

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 650 Host (rev 01)
	Flags: bus master, medium devsel, latency 32
	Memory at e0000000 (32-bit, non-prefetchable) [size=128M]
	Capabilities: [c0] AGP version 2.0

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 64
	Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
	Memory behind bridge: ddd00000-dfefffff
	Prefetchable memory behind bridge: cd900000-ddbfffff

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 04)
	Flags: bus master, medium devsel, latency 0

00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
	Flags: medium devsel, IRQ 10
	I/O ports at 0c00 [size=32]

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
	Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
	Flags: bus master, medium devsel, latency 128
	I/O ports at ff00 [size=16]

00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
	Subsystem: C-Media Electronics Inc: Unknown device 0300
	Flags: bus master, medium devsel, latency 64, IRQ 11
	I/O ports at dc00 [size=256]
	I/O ports at d800 [size=128]
	Capabilities: [48] Power Management version 2

00:03.0 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 0f) (prog-if 10 [OHCI])
	Subsystem: Silicon Integrated Systems [SiS] SiS7001 USB Controller
	Flags: bus master, medium devsel, latency 64, IRQ 12
	Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]

00:03.1 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 0f) (prog-if 10 [OHCI])
	Subsystem: Silicon Integrated Systems [SiS] SiS7001 USB Controller
	Flags: bus master, medium devsel, latency 64, IRQ 5
	Memory at dfffe000 (32-bit, non-prefetchable) [size=4K]

00:03.2 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 0f) (prog-if 10 [OHCI])
	Subsystem: Silicon Integrated Systems [SiS] SiS7001 USB Controller
	Flags: bus master, medium devsel, latency 64, IRQ 11
	Memory at dffff000 (32-bit, non-prefetchable) [size=4K]

00:03.3 USB Controller: Silicon Integrated Systems [SiS] SiS7002 USB 2.0 (prog-if 20 [EHCI])
	Subsystem: Silicon Integrated Systems [SiS] SiS7002 USB 2.0
	Flags: bus master, medium devsel, latency 64, IRQ 12
	Memory at dffdf000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [50] Power Management version 2

00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 90)
	Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet Adapter
	Flags: bus master, medium devsel, latency 64, IRQ 5
	I/O ports at d400 [size=256]
	Memory at dffdb000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at dffa0000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 2

01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3) (prog-if 00 [VGA])
	Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 5
	Memory at de000000 (32-bit, non-prefetchable) [size=16M]
	Memory at d0000000 (32-bit, prefetchable) [size=128M]
	Memory at ddb80000 (32-bit, prefetchable) [size=512K]
	Expansion ROM at dfee0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
	Capabilities: [44] AGP version 2.0

Re: 2.6.0-test4: Hang in i8042_init

[Felipe Alfaro Solana]

On Fri, 2003-08-29 at 06:53, Nick Piggin wrote:
> Is what I am getting. Last line is something like input: PC Speaker
> (followed by the initcall).
> 
> dmseg and lspci from a working kernel attached. Let me know if I can
> do more.

Could it be something related with
http://bugzilla.kernel.org/show_bug.cgi?id=1123?

Re: 2.6.0-test4: Hang in i8042_init

[Nick Piggin]

Felipe Alfaro Solana wrote:

>On Fri, 2003-08-29 at 06:53, Nick Piggin wrote:
>
>>Is what I am getting. Last line is something like input: PC Speaker
>>(followed by the initcall).
>>
>>dmseg and lspci from a working kernel attached. Let me know if I can
>>do more.
>>
>
>Could it be something related with
>http://bugzilla.kernel.org/show_bug.cgi?id=1123?
>
>
>

Yes it seems quite likely. Further poking reveals that the
box still locks with a PS2 mouse _and_ the USB mouse. A PS2
mouse on its own allows the system to boot, although
interrupt 10 (eth0, usb) is not working. Booting with
acpi=off allows the system to boot normally with the USB
mouse, and interrupt 10 works.

2.6.0-test5: Hang in i8042_init

[Nick Piggin]

I'm still getting these hangs in 2.6.0-test5.


Nick Piggin wrote:

>
>
> Andrew Morton wrote:
>
>> Nick Piggin <piggin@cyberone.com.au> wrote:
>>
>>>
>>>
>>> Felipe Alfaro Solana wrote:
>>>
>>>
>>>> On Fri, 2003-08-29 at 06:53, Nick Piggin wrote:
>>>>
>>>>
>>>>> Is what I am getting. Last line is something like input: PC Speaker
>>>>> (followed by the initcall).
>>>>>
>>>>> dmseg and lspci from a working kernel attached. Let me know if I can
>>>>> do more.
>>>>>
>>>>>
>>>> Could it be something related with
>>>> http://bugzilla.kernel.org/show_bug.cgi?id=1123?
>>>>
>>>>
>>>>
>>>>
>>> Yes it seems quite likely. Further poking reveals that the
>>> box still locks with a PS2 mouse _and_ the USB mouse. A PS2
>>> mouse on its own allows the system to boot, although
>>> interrupt 10 (eth0, usb) is not working. Booting with
>>> acpi=off allows the system to boot normally with the USB
>>> mouse, and interrupt 10 works.
>>>
>>>
>>
>> Nick, please send a full report.  There's been quite some breakage 
>> from the
>> recent ACPI updates and it'd be nice to work out what happened.
>>
>> Here's the recipe:
>>
>>  The dmesg output of the failing case is really helpful, As is the
>>  output of acpidmp to examine the ACPI tables on the system.  (Red Hat
>>  includes both of these in their severn beta1, acpidmp is also in 
>> pmtools
>>  on intel's ACPI web page) dmidecode output is useful to identify the 
>> BIOS
>>  version.
>>
>>  Of course the 1st thing to check with ACPI failures is that the BIOS
>>  version shown by dmidmp is the latest provided by the vendor...  
>> Plus, if
>>  we determine the BIOS is toast, DMI provides what we need to add the
>>  system to the DMI or acpi blacklists.
>>
>>  We're seeting the most problems on VIA chip-sets with no IO-APIC.  The
>>  one below is unusual because it is a 2-way system with 3 IO-APICs.
>>
>>  The latest code in linus' tree includes ACPICA 20030813, which is
>>  slightly newer than the one below, it might be a good idea to try that
>>  with CONFIG_ACPI_DEBUG.  Note that it will spit out the DMI info 
>> upon the
>>  mount root failure automatically.
>>
>> Thanks.
>>
>>
>
> OK, well the computer is a 1 CPU Pentium 4 Celeron. I can't get the
> failing dmesg because I can't get a serial console onto it (it isn't
> my computer). The last line of the dmesg is: "input: PC Speaker", and
> the last initcall is i8042_init.
>
> The computer has a PS2 keyboard and a USB mouse. Booting with a PS2
> mouse attached as well still causes a hang. Booting without the USB
> mouse works, however the USB interrupt (2 ohci-hcd's and eth0 share it)
> no longer works, so eth0 doesn't work, and plugging in the USB mouse
> does nothing.
>
> Attached are dmesg, interrupts, .config, acpidmp, dmidecode, etc.
>
>