From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263426AbTKAEbG (ORCPT ); Fri, 31 Oct 2003 23:31:06 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263581AbTKAEbG (ORCPT ); Fri, 31 Oct 2003 23:31:06 -0500 Received: from mail.g-housing.de ([62.75.136.201]:25015 "EHLO mail.g-house.de") by vger.kernel.org with ESMTP id S263426AbTKAEbB (ORCPT ); Fri, 31 Oct 2003 23:31:01 -0500 Message-ID: <3FA33702.60401@g-house.de> Date: Sat, 01 Nov 2003 05:30:58 +0100 From: Christian User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.5) Gecko/20030924 Thunderbird/0.3 X-Accept-Language: en-us, en MIME-Version: 1.0 To: linux-kernel , netdev@oss.sgi.com Subject: ppc32 lockups with 2.6 X-Enigmail-Version: 0.81.7.0 X-Enigmail-Supports: pgp-inline, pgp-mime Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org moin, i have problems with my ppc32 (PReP) machine and 2.6.0-test* kernels. since this is some kind of home "server", i did not test any ealier versions, but 2.6.0-test{7|8|9}. all show the same behaviour, somewhere during the bootup, the machine just freezes. i found out, that upon configuring my thernet devices the lockups occur. so, i have 2 network cards, both are working under 2.4 with the 3c59x (eth0) and tulip (eth1, it's an on-board 21140). loading the drivers by using insmod / modprobe succeeds, the driver registers, some messages are printed. e.g. Linux Tulip driver version 1.1.13 (May 11, 2002) PCI: Enabling device 0000:00:04.0 (0000 -> 0003) tulip0: EEPROM default media type Autosense. tulip0: Index #0 - Media AUI (#2) described by a 21140 non-MII (0) block. tulip0: Index #1 - Media MII (#11) described by a 21140 MII PHY (1) block. tulip0: MII transceiver #8 config 3100 status 786b advertising 01e1. eth0: Digital DS21140 Tulip rev 34 at 0x1800, 08:00:3E:29:0B:B6, IRQ 9. or 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 0000:00:06.0: 3Com PCI 3c905C Tornado at 0x1000. Vers LK1.1.19 00:01:02:f1:83:37, IRQ 11 product code 464a rev 00.13 date 11-12-00 Internal config register is 1800000, transceivers 0xa. 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. 0000:00:06.0: scatter/gather enabled. h/w checksums enabled "ifconfig eth0" gives then an unconfigured eth0, ok. but using "ifconfig eth0 192.168.1.1" results in a lockup. no oops printed, no SysReq anymore. i tried with the "tulip" modul first, and could "strace" the ifconfig, until it freezes. http://nerdbynature.de/bits/sheep/network/ifc-tulip.log the 3c59x module however acted somehow differently: upon using "ifconfig eth0 192.168.1.1" the screen filled with strange chars in some pattern, i've never seen before on a linux box (no, i was clean :-)) (ok, the pattern is probably not important, but it's on [1] anyway) then, the system locked up too. as you can see (http://nerdbynature.de/bits/sheep/network/config) i have then compiled some debug options into the kernel, i loaded the 3c59x module with "debug=6". also, i want to say that this is not my first build of a 2.6 kernel, i have a i386 running pretty stable with 2.6 for weeks now; some time ago i used to have an Alpha (AXP) with 2.5.x running 24x7. please let me know, i have forgotten something or where to look further. i will be glad to help with running tests and the like. i don't suspect hw errors here, because both cards are happy working under 2.4. some details about the PrEP machine: [1] http://nerdbynature.de/bits/ Thank you, Christian. -- BOFH excuse #396: Mail server hit by UniSpammer.