linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marcello <voloterreno@tin.it>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Subject: [2.4.23] IPv6 creates errors on my ethernet device
Date: Sun, 30 Nov 2003 19:22:34 +0100	[thread overview]
Message-ID: <3FCA356A.6050003@tin.it> (raw)

Hi all ,

I have an ethernet card with a Realtek 8139C chip , and I've enabled 
IPv6 in my kernel  (2.4.23)

My ethernet card is connected to an ADSL Modem , an Ericsson HM220dp, 
and every (appoximatly)  50000 packets transmitted/recived by the 
devices ,if IPv6 is enabled , ifconfig reports an error in RX packages :

bash-2.05b# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:E0:7D:D5:0C:ED
          inet6 addr: fe80::2e0:7dff:fed5:ced/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:95734 errors:1 dropped:0 overruns:0 frame:0
          TX packets:101956 errors:0 dropped:0 overruns:0 carrier:0
          collisions:465 txqueuelen:1000
          RX bytes:24717818 (23.5 Mb)  TX bytes:52543424 (50.1 Mb)
          Interrupt:17 Base address:0x5f00
 
The modem is connected at 10Mbps speed Half-Duplex .

If I disable IPv6 I don't see errors on the ethernet device , I've tried 
until 1500000 packets without errors .

What cause those errors? The only solution is disable IPv6?? I've found 
this problem on 2.4.22 too (I haven't tried IPv6 on previous kernels)

Thanks

Marcello


                 reply	other threads:[~2003-11-30 18:17 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3FCA356A.6050003@tin.it \
    --to=voloterreno@tin.it \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: [2.4.23] IPv6 creates errors on my ethernet device' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).