linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bob Liu <bob.liu@oracle.com>
To: Roman Penyaev <rpenyaev@suse.de>, Bart Van Assche <bvanassche@acm.org>
Cc: linux-block@vger.kernel.org, shirley.ma@oracle.com,
	martin.petersen@oracle.com,
	Roman Pen <roman.penyaev@profitbricks.com>,
	Akinobu Mita <akinobu.mita@gmail.com>, Tejun Heo <tj@kernel.org>,
	Jens Axboe <axboe@kernel.dk>, Christoph Hellwig <hch@lst.de>,
	linux-kernel@vger.kernel.org, linux-block-owner@vger.kernel.org
Subject: Re: [RESEND PATCH] blk-mq: fix hang caused by freeze/unfreeze sequence
Date: Wed, 17 Apr 2019 12:06:45 +0800	[thread overview]
Message-ID: <3a423156-4893-c0fd-9f3a-b26806817b7c@oracle.com> (raw)
In-Reply-To: <84cf04edf8f3f3b87b78383a1837aff3@suse.de>

On 4/15/19 5:46 PM, Roman Penyaev wrote:
> On 2019-04-13 05:42, Bart Van Assche wrote:
>> On 4/9/19 2:08 AM, Bob Liu wrote:
>>>  void blk_freeze_queue_start(struct request_queue *q)
>>>  {
>>> -    int freeze_depth;
>>> -
>>> -    freeze_depth = atomic_inc_return(&q->mq_freeze_depth);
>>> -    if (freeze_depth == 1) {
>>> +    mutex_lock(&q->mq_freeze_lock);
>>> +    if (++q->mq_freeze_depth == 1) {
>>>          percpu_ref_kill(&q->q_usage_counter);
>>> +        mutex_unlock(&q->mq_freeze_lock);
>>>          if (queue_is_mq(q))
>>>              blk_mq_run_hw_queues(q, false);
>>> +    } else {
>>> +        mutex_unlock(&q->mq_freeze_lock);
>>>      }
>>>  }
>> Have you considered to move the mutex_unlock() call to the end of the function
>> such that there is only one mutex_unlock() call instead of two? In case you
>> would be worried about holding the mutex around the code that runs the queue,
>> how about changing the blk_mq_run_hw_queues() call such that the queues are
>> run async?
> 
> Hi Bart,
> 
> The only purpose of 'mq_freeze_lock' is to avoid race between mq_freeze_depth
> variable and the following usage of q_usage_counter percpu ref.  I admit that
> my original comment is quite unclear, but locked section should be as short
> as possible, so returning to your question: better to have two unlock calls
> instead of expanding locked critical section.
> 
> Unfortunately I do not have hardware to play again with the issue, but I see
> there is a nice candidate for a quick reproduction:  null_blk queues with
> shared tags.  Having several queues with shared tags and a script, which
> powers on/off (I mean 'power' entry of configfs of the null_blk) different
> null devices from different cpus it is quite possible to trigger the issue.
> Random short msdelay() in correct places can help to increase probability to
> hit the issue quite fast.
> 
> 
> But Bob, what is the backtrace of the issue you hit?  What is the device?
> Conditions to reproduce the issue are quite specific and frankly I did not
> find any "naked" (without any locks) calls of blk_mq_freeze/unfreeze sequence,
> the only candidate which I found, seems, null_blk (not 100% sure, but worth to
> try).
> 

Yes, it can be reproduced with null_blk.
But I added a msleep to save time.
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 9437a5e..875967f1 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -202,6 +202,7 @@ void blk_mq_unfreeze_queue(struct request_queue *q)
        freeze_depth = atomic_dec_return(&q->mq_freeze_depth);
        WARN_ON_ONCE(freeze_depth < 0);
        if (!freeze_depth) {
+               msleep(1000);
                percpu_ref_resurrect(&q->q_usage_counter);
                wake_up_all(&q->mq_freeze_wq);
        }



Below is the backtrace:
---
[  234.604280] ------------[ cut here ]------------
[  234.604288] percpu_ref_kill_and_confirm called more than once on blk_queue_usage_counter_release!
[  234.604305] WARNING: CPU: 0 PID: 11854 at lib/percpu-refcount.c:336 percpu_ref_kill_and_confirm+0x99/0xb0
[  234.604306] Modules linked in: null_blk thunderbolt ccm xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc devlink ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter bnep arc4 intel_rapl iwlmvm x86_pkg_temp_thermal intel_powerclamp mac80211 coretemp snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp kvm_intel snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core nls_iso8859_1 snd_hda_codec_hdmi snd_hda_codec_conexant snd_compress ac97_bus snd_hda_codec_generic snd_pcm_dmaengine crct10dif_pclmul snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel iwlwifi snd_hda_core aesni_intel snd_hwdep snd_pcm thinkpad_acpi uvcvideo nvram ledtrig_audio aes_x86_64 crypto_simd btusb cryptd btrtl glue_helper snd_seq_midi btbcm snd_seq_midi_event intel_cstate videobuf2_vmalloc btintel snd_rawmidi cfg80211 bluetooth intel_rapl_perf
[  234.604361]  hid_sensor_accel_3d snd_seq hid_sensor_magn_3d videobuf2_memops videobuf2_v4l2 videobuf2_common hid_sensor_rotation rtsx_pci_ms hid_sensor_als wmi_bmof videodev input_leds joydev serio_raw hid_sensor_gyro_3d intel_wmi_thunderbolt hid_sensor_trigger snd_seq_device industrialio_triggered_buffer kfifo_buf snd_timer hid_sensor_iio_common media industrialio mei_me snd memstick ecdh_generic mei ucsi_acpi processor_thermal_device typec_ucsi intel_soc_dts_iosf intel_pch_thermal typec soundcore int3403_thermal int340x_thermal_zone int3400_thermal acpi_thermal_rel mac_hid acpi_pad sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq raid0 multipath linear hid_sensor_custom hid_sensor_hub intel_ishtp_hid hid_logitech_hidpp i915 kvmgt vfio_mdev mdev vfio_iommu_type1 vfio kvm irqbypass i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm wacom
[  234.604417]  hid_logitech_dj rtsx_pci_sdmmc hid_generic e1000e usbhid psmouse hid intel_ish_ipc rtsx_pci intel_ishtp wmi video
[  234.604430] CPU: 0 PID: 11854 Comm: sh Not tainted 5.0.0+ #33
[  234.604431] Hardware name: LENOVO 20LJS2EV08/20LJS2EV08, BIOS R0SET33W (1.17 ) 07/18/2018
[  234.604436] RIP: 0010:percpu_ref_kill_and_confirm+0x99/0xb0
[  234.604439] Code: 00 eb d3 80 3d 76 a4 2a 01 00 75 ab 48 8b 53 10 48 c7 c6 00 fd a6 8f 48 c7 c7 b0 56 d5 8f c6 05 5b a4 2a 01 01 e8 f7 a2 b1 ff <0f> 0b 48 8b 43 08 eb 85 90 90 90 90 90 90 90 90 90 90 90 90 90 90
[  234.604441] RSP: 0018:ffffa2880ae9fd00 EFLAGS: 00010086
[  234.604443] RAX: 0000000000000000 RBX: ffff9768b3b815d8 RCX: 0000000000000000
[  234.604445] RDX: 0000000000000055 RSI: ffffffff905758f5 RDI: 0000000000000046
[  234.604447] RBP: ffffa2880ae9fd18 R08: fffffffa314c837d R09: ffffffffffffffff
[  234.604449] R10: ffffe3c84fc0a200 R11: 000000000001abb4 R12: 0000000000000246
[  234.604451] R13: 0000000000000000 R14: ffff9768b0448300 R15: ffff9768b2703600
[  234.604454] FS:  00007fae2f3e6540(0000) GS:ffff9768d1400000(0000) knlGS:0000000000000000
[  234.604456] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  234.604458] CR2: 000056078102ee08 CR3: 0000000431384002 CR4: 00000000003606f0
[  234.604460] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  234.604462] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  234.604463] Call Trace:
[  234.604471]  blk_freeze_queue_start+0x2d/0x50
[  234.604475]  blk_set_queue_dying+0x17/0x40
[  234.604479]  blk_cleanup_queue+0x26/0xd0
[  234.604486]  null_del_dev+0x59/0x110 [null_blk]
[  234.604491]  nullb_device_power_store+0xca/0x100 [null_blk]
[  234.604495]  configfs_write_file+0xb9/0x120
[  234.604500]  __vfs_write+0x3a/0x1b0
[  234.604505]  ? apparmor_file_permission+0x1a/0x20
[  234.604509]  ? security_file_permission+0x3b/0xf0
[  234.604513]  ? _cond_resched+0x1a/0x50
[  234.604516]  vfs_write+0xb8/0x1b0
[  234.604519]  ksys_write+0x55/0xc0
[  234.604523]  __x64_sys_write+0x1a/0x20
[  234.604528]  do_syscall_64+0x5a/0x110
[  234.604532]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  234.604535] RIP: 0033:0x7fae2ef04154
[  234.604537] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 b1 07 2e 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 41 54 55 49 89 d4 53 48 89 f5
[  234.604538] RSP: 002b:00007ffddfe68e88 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  234.604540] RAX: ffffffffffffffda RBX: 00005649349e68a0 RCX: 00007fae2ef04154
[  234.604542] RDX: 0000000000000002 RSI: 00005649349e68a0 RDI: 0000000000000001
[  234.604543] RBP: 0000000000000002 R08: 0000000000000077 R09: 0000000000000000
[  234.604544] R10: 00005649349e6010 R11: 0000000000000246 R12: 0000000000000001
[  234.604545] R13: 0000000000000002 R14: 7fffffffffffffff R15: 00007ffddfe6aed9
[  234.604548] ---[ end trace d99129291464ebae ]---

      reply	other threads:[~2019-04-17  4:07 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-09  9:08 [RESEND PATCH] blk-mq: fix hang caused by freeze/unfreeze sequence Bob Liu
2019-04-09  9:29 ` Jinpu Wang
2019-04-13  0:36   ` Bob Liu
2019-04-09 11:27 ` Dongli Zhang
2019-04-13  3:42 ` Bart Van Assche
2019-04-14 13:09   ` Bob Liu
2019-04-15  9:46   ` Roman Penyaev
2019-04-17  4:06     ` Bob Liu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3a423156-4893-c0fd-9f3a-b26806817b7c@oracle.com \
    --to=bob.liu@oracle.com \
    --cc=akinobu.mita@gmail.com \
    --cc=axboe@kernel.dk \
    --cc=bvanassche@acm.org \
    --cc=hch@lst.de \
    --cc=linux-block-owner@vger.kernel.org \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=roman.penyaev@profitbricks.com \
    --cc=rpenyaev@suse.de \
    --cc=shirley.ma@oracle.com \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).