linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Maxime Ripard <maxime@cerno.tech>
Cc: Ruslan Zalata <rz@fabmicro.ru>, Jean Delvare <jdelvare@suse.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev
Subject: Re: [PATCH v2] hwmon: (sun4i-lradc) Add driver for LRADC found on Allwinner A13/A20 SoC
Date: Mon, 2 May 2022 09:21:13 -0700	[thread overview]
Message-ID: <3a58097d-5c18-cee5-133b-18c61e94c62c@roeck-us.net> (raw)
In-Reply-To: <20220502133927.4wqhru4es32gws2b@houat>

On 5/2/22 06:39, Maxime Ripard wrote:
> On Mon, May 02, 2022 at 06:31:56AM -0700, Guenter Roeck wrote:
>> On 5/2/22 04:00, Maxime Ripard wrote:
>>> Hi,
>>>
>>> On Thu, Apr 28, 2022 at 09:09:03PM +0000, Ruslan Zalata wrote:
>>>> Some Allwinner SoCs like A13, A20 or T2 are equipped with two-channel
>>>> low rate (6 bit) ADC that is often used for extra keys. There's a driver
>>>> for that already implementing standard input device, but it has these
>>>> limitations: 1) it cannot be used for general ADC data equisition, and
>>>> 2) it uses only one LRADC channel of two available.
>>>>
>>>> This driver provides basic hwmon interface to both channels of LRADC on
>>>> such Allwinner SoCs.
>>>>
>>>> Signed-off-by: Ruslan Zalata <rz@fabmicro.ru>
>>>> ---
>>>>    MAINTAINERS                       |   6 +
>>>>    drivers/hwmon/Kconfig             |  13 ++
>>>>    drivers/hwmon/Makefile            |   1 +
>>>>    drivers/hwmon/sun4i-lradc-hwmon.c | 280 ++++++++++++++++++++++++++++++
>>>>    4 files changed, 300 insertions(+)
>>>>    create mode 100644 drivers/hwmon/sun4i-lradc-hwmon.c
>>>>
>>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>>> index 5e8c2f61176..d9c71e94133 100644
>>>> --- a/MAINTAINERS
>>>> +++ b/MAINTAINERS
>>>> @@ -18861,6 +18861,12 @@ S:	Maintained
>>>>    F:	Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
>>>>    F:	drivers/input/keyboard/sun4i-lradc-keys.c
>>>> +SUN4I LOW RES ADC HWMON DRIVER
>>>> +M:	Ruslan Zalata <rz@fabmicro.ru>
>>>> +L:	linux-hwmon@vger.kernel.org
>>>> +S:	Maintained
>>>> +F:	drivers/hwmon/sun4i-lradc-hwmon.c
>>>> +
>>>>    SUNDANCE NETWORK DRIVER
>>>>    M:	Denis Kirjanov <kda@linux-powerpc.org>
>>>>    L:	netdev@vger.kernel.org
>>>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
>>>> index 68a8a27ab3b..86776488a81 100644
>>>> --- a/drivers/hwmon/Kconfig
>>>> +++ b/drivers/hwmon/Kconfig
>>>> @@ -1691,6 +1691,19 @@ config SENSORS_SIS5595
>>>>    	  This driver can also be built as a module. If so, the module
>>>>    	  will be called sis5595.
>>>> +config SENSORS_SUN4I_LRADC
>>>> +	tristate "Allwinner A13/A20 LRADC hwmon"
>>>> +	depends on ARCH_SUNXI && !KEYBOARD_SUN4I_LRADC
>>>> +	help
>>>> +	  Say y here to support the LRADC found in Allwinner A13/A20 SoCs.
>>>> +	  Both channels are supported.
>>>> +
>>>> +	  This driver can also be built as module. If so, the module
>>>> +	  will be called sun4i-lradc-hwmon.
>>>> +
>>>> +	  This option is not compatible with KEYBOARD_SUN4I_LRADC, one
>>>> +	  of these must be used at a time.
>>>
>>> How do you plan on enforcing that?
>>>
>> 	depends on ARCH_SUNXI && !KEYBOARD_SUN4I_LRADC
> 
> Right, but that just doesn't fly for any generic distro / build-system.
> 

That is correct. Alternative might be to use devicetree bindings, which
presumably will be needed anyway to tell the driver(s) what to bind to.

Guenter

  reply	other threads:[~2022-05-02 16:22 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20220428210906.29527-1-rz@fabmicro.ru>
2022-04-28 21:30 ` [PATCH v2] hwmon: (sun4i-lradc) Add driver for LRADC found on Allwinner A13/A20 SoC Guenter Roeck
2022-04-29  0:28   ` Ruslan Zalata
2022-04-29  5:32     ` Guenter Roeck
2022-04-29  6:03       ` Guenter Roeck
2022-05-02 23:47         ` Ruslan Zalata
2022-04-29 13:24   ` Jonathan Cameron
2022-05-02 23:20     ` Ruslan Zalata
2022-05-02 11:00 ` Maxime Ripard
2022-05-02 11:15   ` Icenowy Zheng
2022-05-02 11:21     ` Maxime Ripard
2022-05-03  2:02       ` Guenter Roeck
2022-05-03 15:26         ` Ruslan Zalata
2022-05-03 16:14           ` Maxime Ripard
2022-05-03 21:37             ` Ruslan Zalata
2022-05-04 14:12               ` Maxime Ripard
2022-05-02 13:31   ` Guenter Roeck
2022-05-02 13:39     ` Maxime Ripard
2022-05-02 16:21       ` Guenter Roeck [this message]
2022-05-03  8:50   ` Ruslan Zalata
2022-05-03 16:07     ` Maxime Ripard
2022-05-04 19:33 Jamie Cuthbert
2022-05-04 19:33 Jamie Cuthbert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3a58097d-5c18-cee5-133b-18c61e94c62c@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=jdelvare@suse.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=maxime@cerno.tech \
    --cc=rz@fabmicro.ru \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).