Re: [PATCH 2/2] clk: at91: add register definition for sama7g5's master clock

[Nicolas Ferre <nicolas.ferre@microchip.com>]

On 19/07/2021 at 10:03, Claudiu Beznea wrote:
> Add register definitions for SAMA7G5's master clock. These would be
> also used by architecture specific power saving code.
> 
> Fixes: 6cb0e54412a3 ("ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes")
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

> ---
> 
> Hi Stephen,
> 
> This is a part from patch at [1]. I keep it at minimum (only definitions)
> for faster acceptance as the build is broken on arm multi_v7_defconfig
> without it).
> In next version of patch at [1] I will update it accordingly.

Stephen,

Before hearing from you I inserted this patch in our at91-soc branch 
that is part of linux-next. With this at least the build don't break 
anymore.

Tell me if you want to have an immutable branch that we could share with 
it on top of 5.14-rc1 or if it's fine if we add the same patch in both 
of our trees.

Best regards,
   Nicolas


> [1] https://lore.kernel.org/linux-clk/20210401122726.28528-5-claudiu.beznea@microchip.com/
> 
>   include/linux/clk/at91_pmc.h | 26 ++++++++++++++++++++++++++
>   1 file changed, 26 insertions(+)
> 
> diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
> index a4f82e836a7c..ccb3f034bfa9 100644
> --- a/include/linux/clk/at91_pmc.h
> +++ b/include/linux/clk/at91_pmc.h
> @@ -137,6 +137,32 @@
>   #define			AT91_PMC_PLLADIV2_ON		(1 << 12)
>   #define		AT91_PMC_H32MXDIV	BIT(24)
>   
> +#define	AT91_PMC_MCR_V2		0x30				/* Master Clock Register [SAMA7G5 only] */
> +#define		AT91_PMC_MCR_V2_ID_MSK	(0xF)
> +#define			AT91_PMC_MCR_V2_ID(_id)		((_id) & AT91_PMC_MCR_V2_ID_MSK)
> +#define		AT91_PMC_MCR_V2_CMD	(1 << 7)
> +#define		AT91_PMC_MCR_V2_DIV	(7 << 8)
> +#define			AT91_PMC_MCR_V2_DIV1		(0 << 8)
> +#define			AT91_PMC_MCR_V2_DIV2		(1 << 8)
> +#define			AT91_PMC_MCR_V2_DIV4		(2 << 8)
> +#define			AT91_PMC_MCR_V2_DIV8		(3 << 8)
> +#define			AT91_PMC_MCR_V2_DIV16		(4 << 8)
> +#define			AT91_PMC_MCR_V2_DIV32		(5 << 8)
> +#define			AT91_PMC_MCR_V2_DIV64		(6 << 8)
> +#define			AT91_PMC_MCR_V2_DIV3		(7 << 8)
> +#define		AT91_PMC_MCR_V2_CSS	(0x1F << 16)
> +#define			AT91_PMC_MCR_V2_CSS_MD_SLCK	(0 << 16)
> +#define			AT91_PMC_MCR_V2_CSS_TD_SLCK	(1 << 16)
> +#define			AT91_PMC_MCR_V2_CSS_MAINCK	(2 << 16)
> +#define			AT91_PMC_MCR_V2_CSS_MCK0	(3 << 16)
> +#define			AT91_PMC_MCR_V2_CSS_SYSPLL	(5 << 16)
> +#define			AT91_PMC_MCR_V2_CSS_DDRPLL	(6 << 16)
> +#define			AT91_PMC_MCR_V2_CSS_IMGPLL	(7 << 16)
> +#define			AT91_PMC_MCR_V2_CSS_BAUDPLL	(8 << 16)
> +#define			AT91_PMC_MCR_V2_CSS_AUDIOPLL	(9 << 16)
> +#define			AT91_PMC_MCR_V2_CSS_ETHPLL	(10 << 16)
> +#define		AT91_PMC_MCR_V2_EN	(1 << 28)
> +
>   #define AT91_PMC_XTALF		0x34			/* Main XTAL Frequency Register [SAMA7G5 only] */
>   
>   #define	AT91_PMC_USB		0x38			/* USB Clock Register [some SAM9 only] */
> 


-- 
Nicolas Ferre