From: Parthiban Nallathambi <pn@denx.de>
To: Shawn Guo <shawnguo@kernel.org>
Cc: pn@denx.de, robh+dt@kernel.org, mark.rutland@arm.com,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, linux-imx@nxp.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ARM: dts: imx6: Extend support for Phytec phycore i.MX6ULL SoM
Date: Mon, 7 Oct 2019 12:42:45 +0200 [thread overview]
Message-ID: <3c92e681-3b7b-fedf-48bc-cfb2080c3f12@denx.de> (raw)
In-Reply-To: <20191006082349.GA7150@dragon>
On 10/6/19 10:23 AM, Shawn Guo wrote:
> On Thu, Sep 12, 2019 at 10:29:28PM +0200, Parthiban Nallathambi wrote:
>> Extend Phycore i.MX6UL SoM for i.MX6ULL with on board eMMC. Phycore
>> i.MX6ULL is deployed with same carrier board Segin as the pins are
>> compatible with UL version.
>>
>> Signed-off-by: Parthiban Nallathambi <pn@denx.de>
>
> What is the base that the patch was generated from? It doesn't apply to
> my tree.
It was based on prior to 5.4 merge window. But there are series of patch
which renamed the filename and the changes are already part of mainline
from Phytec.
Please ignore this patch.
Thanks,
Parthiban N
>
> Shawn
>
>> ---
>> arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi | 26 +++++++++++++++++--
>> .../dts/imx6ul-phytec-phyboard-segin-full.dts | 5 ++++
>> arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi | 24 +++++++++++++++++
>> 3 files changed, 53 insertions(+), 2 deletions(-)
>> create mode 100644 arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
>>
>> diff --git a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
>> index fc2997449b49..822a178ce438 100644
>> --- a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
>> +++ b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
>> @@ -7,7 +7,6 @@
>> #include <dt-bindings/gpio/gpio.h>
>> #include <dt-bindings/interrupt-controller/irq.h>
>> #include <dt-bindings/pwm/pwm.h>
>> -#include "imx6ul.dtsi"
>>
>> / {
>> model = "Phytec phyCORE i.MX6 UltraLite";
>> @@ -65,7 +64,7 @@
>> pinctrl-names = "default";
>> pinctrl-0 = <&pinctrl_gpmi_nand>;
>> nand-on-flash-bbt;
>> - status = "okay";
>> + status = "disabled";
>> };
>>
>> &i2c1 {
>> @@ -90,6 +89,15 @@
>> status = "okay";
>> };
>>
>> +&usdhc2 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_usdhc2>;
>> + bus-width = <8>;
>> + no-1-8-v;
>> + non-removable;
>> + status = "disabled";
>> +};
>> +
>> &iomuxc {
>> pinctrl_enet1: enet1grp {
>> fsl,pins = <
>> @@ -145,4 +153,18 @@
>> >;
>> };
>>
>> + pinctrl_usdhc2: usdhc2grp {
>> + fsl,pins = <
>> + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
>> + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
>> + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
>> + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
>> + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
>> + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
>> + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9
>> + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
>> + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
>> + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
>> + >;
>> + };
>> };
>> diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
>> index b6a1407a9d44..76f2447f2657 100644
>> --- a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
>> +++ b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
>> @@ -5,6 +5,7 @@
>> */
>>
>> /dts-v1/;
>> +#include "imx6ul.dtsi"
>> #include "imx6ul-phytec-pcl063.dtsi"
>> #include "imx6ul-phytec-phyboard-segin.dtsi"
>> #include "imx6ul-phytec-peb-eval-01.dtsi"
>> @@ -37,6 +38,10 @@
>> status = "okay";
>> };
>>
>> +&gpmi {
>> + status = "okay";
>> +};
>> +
>> &i2c_rtc {
>> status = "okay";
>> };
>> diff --git a/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
>> new file mode 100644
>> index 000000000000..3f749d9f09a5
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
>> @@ -0,0 +1,24 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (C) 2018 PHYTEC Messtechnik GmbH
>> + * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
>> + */
>> +
>> +#include "imx6ul-phytec-pcl063.dtsi"
>> +
>> +/ {
>> + model = "PHYTEC phyCORE-i.MX 6ULL";
>> + compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull";
>> +};
>> +
>> +&iomuxc {
>> + /delete-node/ gpioledssomgrp;
>> +};
>> +
>> +&iomuxc_snvs {
>> + pinctrl_gpioleds_som: gpioledssomgrp {
>> + fsl,pins = <
>> + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0
>> + >;
>> + };
>> +};
>> --
>> 2.21.0
>>
>
--
Thanks,
Parthiban N
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-22 Fax: (+49)-8142-66989-80 Email: pn@denx.de
prev parent reply other threads:[~2019-10-07 10:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-12 20:29 [PATCH] ARM: dts: imx6: Extend support for Phytec phycore i.MX6ULL SoM Parthiban Nallathambi
2019-10-06 8:23 ` Shawn Guo
2019-10-07 10:42 ` Parthiban Nallathambi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3c92e681-3b7b-fedf-48bc-cfb2080c3f12@denx.de \
--to=pn@denx.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).