From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1168589AbcKAK1K (ORCPT ); Tue, 1 Nov 2016 06:27:10 -0400 Received: from arroyo.ext.ti.com ([198.47.19.12]:34002 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1168525AbcKAK1G (ORCPT ); Tue, 1 Nov 2016 06:27:06 -0400 Subject: Re: [PATCH v2 5/5] ARM: dts: da850-lcdk: add tilcdc panel node To: Bartosz Golaszewski , Kevin Hilman , Michael Turquette , Rob Herring , Frank Rowand , Mark Rutland , Peter Ujfalusi , Russell King References: <1477925138-23457-1-git-send-email-bgolaszewski@baylibre.com> <1477925138-23457-6-git-send-email-bgolaszewski@baylibre.com> CC: LKML , arm-soc , linux-drm , linux-devicetree , Jyri Sarha , Tomi Valkeinen , David Airlie , Laurent Pinchart From: Sekhar Nori Message-ID: <3e8671aa-e59d-4595-c323-af9e6a0ad615@ti.com> Date: Tue, 1 Nov 2016 15:56:17 +0530 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.4.0 MIME-Version: 1.0 In-Reply-To: <1477925138-23457-6-git-send-email-bgolaszewski@baylibre.com> Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Monday 31 October 2016 08:15 PM, Bartosz Golaszewski wrote: > The tilcdc driver is not yet ready for working together with the > dumb-vga-dac drm bridge. While the work on enabling drm_bridge > support in tilcdc continues, enable the VGA connector on da850-lcdk > with the following workaround: use the tilcdc-panel driver with > a set of common (and tested) resolutions. > > Once the drm bridge support is complete, we'll remove the node added > by this patch and use the correct solution. This change will be > transparent for the user. > > Signed-off-by: Bartosz Golaszewski I dont think this can be applied. If this goes in v4.10, then the DT blob becomes an ABI and driver will have to support tilcdc-panel driver for DA850 forever. Its probably better to wait for the proper driver support to arrive. Thanks, Sekhar