From: JC Kuo <jckuo@nvidia.com>
To: Nagarjuna Kristam <nkristam@nvidia.com>, <balbi@kernel.org>,
<gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
<jonathanh@nvidia.com>, <mark.rutland@arm.com>,
<robh+dt@kernel.org>, <kishon@ti.com>
Cc: <devicetree@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [Patch V2 03/18] phy: tegra: xusb: Add usb-role-switch support
Date: Thu, 26 Dec 2019 14:42:33 +0800 [thread overview]
Message-ID: <3f02b1c8-0d2e-700c-d1f5-80f9655f62e0@nvidia.com> (raw)
In-Reply-To: <1576660591-10383-4-git-send-email-nkristam@nvidia.com>
On 12/18/19 5:16 PM, Nagarjuna Kristam wrote:
> If usb-role-switch property is present in USB 2 port, register
> usb-role-switch to receive usb role changes.
>
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> ---
> V2:
> - Removed dev_set_drvdata for port->dev.
> - Added of_platform_depopulate during error handling and driver removal.
> ---
> drivers/phy/tegra/Kconfig | 1 +
> drivers/phy/tegra/xusb.c | 42 ++++++++++++++++++++++++++++++++++++++++++
> drivers/phy/tegra/xusb.h | 3 +++
> 3 files changed, 46 insertions(+)
>
> diff --git a/drivers/phy/tegra/Kconfig b/drivers/phy/tegra/Kconfig
> index f9817c3..df07c4d 100644
> --- a/drivers/phy/tegra/Kconfig
> +++ b/drivers/phy/tegra/Kconfig
> @@ -2,6 +2,7 @@
> config PHY_TEGRA_XUSB
> tristate "NVIDIA Tegra XUSB pad controller driver"
> depends on ARCH_TEGRA
> + select USB_CONN_GPIO
> help
> Choose this option if you have an NVIDIA Tegra SoC.
>
> diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
> index f98ec39..dc00b42 100644
> --- a/drivers/phy/tegra/xusb.c
> +++ b/drivers/phy/tegra/xusb.c
> @@ -523,6 +523,7 @@ static int tegra_xusb_port_init(struct tegra_xusb_port *port,
> port->dev.type = &tegra_xusb_port_type;
> port->dev.of_node = of_node_get(np);
> port->dev.parent = padctl->dev;
> + port->dev.driver = padctl->dev->driver;
>
> err = dev_set_name(&port->dev, "%s-%u", name, index);
> if (err < 0)
> @@ -541,6 +542,10 @@ static int tegra_xusb_port_init(struct tegra_xusb_port *port,
>
> static void tegra_xusb_port_unregister(struct tegra_xusb_port *port)
> {
> + if (!IS_ERR_OR_NULL(port->usb_role_sw)) {
> + of_platform_depopulate(&port->dev);
> + usb_role_switch_unregister(port->usb_role_sw);
> + }
> device_unregister(&port->dev);
> }
>
> @@ -551,11 +556,42 @@ static const char *const modes[] = {
> [USB_DR_MODE_OTG] = "otg",
> };
>
> +static int tegra_xusb_role_sw_set(struct device *dev, enum usb_role role)
> +{
> + dev_dbg(dev, "%s calling notifier for role is %d\n", __func__, role);
> +
> + return 0;
> +}
> +
> +static int tegra_xusb_setup_usb_role_switch(struct tegra_xusb_port *port)
> +{
> + int err = 0;
> + struct usb_role_switch_desc role_sx_desc = {
> + .set = tegra_xusb_role_sw_set,
> + .fwnode = dev_fwnode(&port->dev),
> + };
> +
> + port->usb_role_sw = usb_role_switch_register(&port->dev,
> + &role_sx_desc);
> + if (IS_ERR(port->usb_role_sw)) {
> + err = PTR_ERR(port->usb_role_sw);
> + if (err != EPROBE_DEFER)
> + dev_err(&port->dev, "Failed to register USB role SW: %d",
> + err);
> + }
> +
> + /* populate connector entry */
> + of_platform_populate(port->dev.of_node, NULL, NULL, &port->dev);
> +
> + return err;
> +}
> +
> static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2)
> {
> struct tegra_xusb_port *port = &usb2->base;
> struct device_node *np = port->dev.of_node;
> const char *mode;
> + int err;
>
> usb2->internal = of_property_read_bool(np, "nvidia,internal");
>
> @@ -572,6 +608,12 @@ static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2)
> usb2->mode = USB_DR_MODE_HOST;
> }
>
"usb-role-switch" is not required for host mode port. If a otg or a peripheral
port doesn't have "usb-role-switch" property, .probe() should abort.
Thanks,
JC
> + if (of_property_read_bool(np, "usb-role-switch")) {
> + err = tegra_xusb_setup_usb_role_switch(port);
> + if (err < 0)
> + return err;
> + }
> +
> usb2->supply = devm_regulator_get(&port->dev, "vbus");
> return PTR_ERR_OR_ZERO(usb2->supply);
> }
> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
> index da94fcc..9f27899 100644
> --- a/drivers/phy/tegra/xusb.h
> +++ b/drivers/phy/tegra/xusb.h
> @@ -12,6 +12,7 @@
> #include <linux/workqueue.h>
>
> #include <linux/usb/otg.h>
> +#include <linux/usb/role.h>
>
> /* legacy entry points for backwards-compatibility */
> int tegra_xusb_padctl_legacy_probe(struct platform_device *pdev);
> @@ -266,6 +267,8 @@ struct tegra_xusb_port {
> struct list_head list;
> struct device dev;
>
> + struct usb_role_switch *usb_role_sw;
> +
> const struct tegra_xusb_port_ops *ops;
> };
>
>
next prev parent reply other threads:[~2019-12-26 6:42 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-18 9:16 [Patch V2 00/18] Tegra XUSB OTG support Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 01/18] dt-bindings: phy: tegra-xusb: Add usb-role-switch Nagarjuna Kristam
2019-12-19 13:05 ` Thierry Reding
2019-12-20 8:08 ` JC Kuo
2020-01-10 11:16 ` Thierry Reding
2020-01-13 4:37 ` Nagarjuna Kristam
2020-01-13 15:06 ` Thierry Reding
2019-12-18 9:16 ` [Patch V2 02/18] dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding Nagarjuna Kristam
2019-12-18 23:24 ` Rob Herring
2019-12-19 13:10 ` Thierry Reding
2019-12-18 9:16 ` [Patch V2 03/18] phy: tegra: xusb: Add usb-role-switch support Nagarjuna Kristam
2019-12-19 13:26 ` Thierry Reding
2019-12-27 6:39 ` Nagarjuna Kristam
2019-12-29 9:36 ` Thierry Reding
2019-12-30 5:17 ` Nagarjuna Kristam
2019-12-26 6:42 ` JC Kuo [this message]
2019-12-27 6:18 ` Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 04/18] phy: tegra: xusb: Add usb-phy support Nagarjuna Kristam
2019-12-19 13:37 ` Thierry Reding
2019-12-27 7:06 ` Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 05/18] phy: tegra: xusb: Add support to get companion USB 3 port Nagarjuna Kristam
2019-12-26 7:03 ` JC Kuo
2019-12-18 9:16 ` [Patch V2 06/18] phy: tegra: xusb: Add set_mode support for USB 2 phy on Tegra210 Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 07/18] phy: tegra: xusb: Add set_mode support for utmi phy on Tegra186 Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 08/18] usb: xhci-tegra: Add OTG support Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 09/18] usb: gadget: tegra-xudc: Remove usb-role-switch support Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 10/18] usb: gadget: tegra-xudc: Add usb-phy support Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 11/18] usb: gadget: tegra-xudc: use phy_set_mode to set/unset device mode Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 12/18] usb: gadget: tegra-xudc: support multiple device modes Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 13/18] arm64: tegra: update OTG port entries for jetson-tx1 Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 14/18] arm64: tegra: update OTG port entries for jetson-tx2 Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 15/18] arm64: tegra: Add xudc node for Tegra210 Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 16/18] arm64: tegra: Enable xudc on Jetson TX1 Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 17/18] arm64: tegra: Add xudc node for Tegra186 Nagarjuna Kristam
2019-12-18 9:16 ` [Patch V2 18/18] arm64: tegra: Enable xudc node on Jetson TX2 Nagarjuna Kristam
2019-12-19 13:13 ` [Patch V2 00/18] Tegra XUSB OTG support Thierry Reding
2019-12-20 7:35 ` JC Kuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3f02b1c8-0d2e-700c-d1f5-80f9655f62e0@nvidia.com \
--to=jckuo@nvidia.com \
--cc=balbi@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nkristam@nvidia.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).