From: Marc Gonzalez <firstname.lastname@example.org> To: Rajendra Nayak <email@example.com>, MSM <firstname.lastname@example.org> Cc: Andy Gross <email@example.com>, Viresh Kumar <firstname.lastname@example.org>, Bjorn Andersson <email@example.com>, Jeffrey Hugo <firstname.lastname@example.org>, LKML <email@example.com> Subject: Re: [PATCH v11 0/9] Add power domain driver for corners on msm8996/sdm845 Date: Fri, 18 Jan 2019 11:17:18 +0100 Message-ID: <firstname.lastname@example.org> (raw) In-Reply-To: <email@example.com> On 18/01/2019 04:54, Rajendra Nayak wrote: > On 1/17/2019 8:33 PM, Marc Gonzalez wrote: > >> On 10/01/2019 05:02, Rajendra Nayak wrote: >> >>> Rajendra Nayak (9): >>> dt-bindings: opp: Introduce opp-level bindings >>> OPP: Add support for parsing the 'opp-level' property >>> dt-bindings: power: Add qcom rpm power domain driver bindings >>> soc: qcom: rpmpd: Add a Power domain driver to model corners >>> soc: qcom: rpmpd: Add support for get/set performance state >>> arm64: dts: msm8996: Add rpmpd device node >>> soc: qcom: rpmhpd: Add RPMh power domain driver >>> arm64: dts: sdm845: Add rpmh powercontroller node >>> soc: qcom: rpmhpd: Mark mx as a parent for cx >>> >>> Documentation/devicetree/bindings/opp/opp.txt | 3 + >>> .../devicetree/bindings/power/qcom,rpmpd.txt | 145 +++++++ >>> arch/arm64/boot/dts/qcom/msm8996.dtsi | 34 ++ >>> arch/arm64/boot/dts/qcom/sdm845.dtsi | 51 +++ >> >> Whenever I see these patches adding support for msm8996 (aka sdm820) and sdm845 >> simultaneously, I think to myself: "Why is sdm835 being left out? It was released >> between sdm820 and sdm845, it cannot be /that/ different." > > It isn't that different, and it should be quite straight forward to add support for it > with the rpmpd driver (the rpmhpd is for platforms sdm845 and beyond which use rpmh) > > When I started working on these patches, support for sdm835 upstream was non-existent > so I started off with what was the better supported one which was the 820 (msm8996). Once you land this patch series, could you take a quick look at how much work is needed to add msm8998 support? I'm betting it would take you only a few hours. Regards.
next prev parent reply index Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-01-10 4:02 Rajendra Nayak 2019-01-10 4:02 ` [PATCH v11 1/9] dt-bindings: opp: Introduce opp-level bindings Rajendra Nayak 2019-01-10 6:26 ` Viresh Kumar 2019-01-11 19:06 ` Stephen Boyd 2019-01-11 22:16 ` Doug Anderson 2019-01-15 19:59 ` Rob Herring 2019-01-10 4:02 ` [PATCH v11 2/9] OPP: Add support for parsing the 'opp-level' property Rajendra Nayak 2019-01-10 6:29 ` Viresh Kumar 2019-01-11 19:06 ` Stephen Boyd 2019-01-10 4:02 ` [PATCH v11 3/9] dt-bindings: power: Add qcom rpm power domain driver bindings Rajendra Nayak 2019-01-10 4:02 ` [PATCH v11 4/9] soc: qcom: rpmpd: Add a Power domain driver to model corners Rajendra Nayak 2019-01-17 17:42 ` Guenter Roeck 2019-01-18 4:54 ` Rajendra Nayak 2019-01-10 4:02 ` [PATCH v11 5/9] soc: qcom: rpmpd: Add support for get/set performance state Rajendra Nayak 2019-01-10 4:02 ` [PATCH v11 6/9] arm64: dts: msm8996: Add rpmpd device node Rajendra Nayak 2019-01-10 4:02 ` [PATCH v11 7/9] soc: qcom: rpmhpd: Add RPMh power domain driver Rajendra Nayak 2019-01-10 4:02 ` [PATCH v11 8/9] arm64: dts: sdm845: Add rpmh powercontroller node Rajendra Nayak 2019-01-10 4:02 ` [PATCH v11 9/9] soc: qcom: rpmhpd: Mark mx as a parent for cx Rajendra Nayak 2019-01-10 6:33 ` [PATCH v11 0/9] Add power domain driver for corners on msm8996/sdm845 Viresh Kumar 2019-01-16 5:52 ` Bjorn Andersson 2019-01-16 15:18 ` Ulf Hansson 2019-01-17 4:24 ` Viresh Kumar 2019-01-17 15:03 ` Marc Gonzalez 2019-01-18 3:54 ` Rajendra Nayak 2019-01-18 10:17 ` Marc Gonzalez [this message] 2019-01-21 9:20 ` Rajendra Nayak
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
LKML Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \ email@example.com public-inbox-index lkml Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel AGPL code for this site: git clone https://public-inbox.org/public-inbox.git