From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id F4057C433E2 for ; Fri, 12 Jun 2020 13:29:48 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id CF89E2074B for ; Fri, 12 Jun 2020 13:29:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726289AbgFLN3r (ORCPT ); Fri, 12 Jun 2020 09:29:47 -0400 Received: from ms-10.1blu.de ([178.254.4.101]:40176 "EHLO ms-10.1blu.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726053AbgFLN3p (ORCPT ); Fri, 12 Jun 2020 09:29:45 -0400 Received: from [78.43.71.214] (helo=marius.localnet) by ms-10.1blu.de with esmtpsa (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.86_2) (envelope-from ) id 1jjjkU-0007ss-AZ; Fri, 12 Jun 2020 15:29:34 +0200 From: Marius Zachmann To: Guenter Roeck Cc: jdelvare@suse.com, linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, mail@mariuszachmann.de Subject: [RFC v2] hwmon: add Corsair Commander Pro driver Date: Fri, 12 Jun 2020 15:29:33 +0200 Message-ID: <4064217.uIqdvtiHzK@marius> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" X-Con-Id: 241080 X-Con-U: 0-mail X-Originating-IP: 78.43.71.214 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This is a driver for the Corsair Commander Pro. It provides sysfs attributes for: - Reading fan speed - Reading temp sensors - Reading voltage values - Writing pwm and reading last written pwm Changed it to a USB driver for a couple of reasons. Still need to add it to the hid_ignore_list in hid-quirks.c Signed-off-by: Marius Zachmann --- Changes from v1: - Style issues - Changed to USB driver - Clarify reading pwm in Documentation and code - Fixed attribute name number in Documentation - MODULE_LICENSE now "GPL" - Removed unneccesary hwmondev in ccp_device - Moved buffer to ccp_device and mutex out of send_usb_cmd - No more replacing or ignoring error codes - Use DIV_ROUND_CLOSEST in set_pwm - Changed fan_label when unknown to "fanX other" - Only accept 0 or 1 for fan_enable - Check for ERR_PTR in ccp_probe --- Documentation/hwmon/corsair-cpro.rst | 43 +++ MAINTAINERS | 6 + drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/corsair-cpro.c | 451 +++++++++++++++++++++++++++ 5 files changed, 511 insertions(+) create mode 100644 Documentation/hwmon/corsair-cpro.rst create mode 100644 drivers/hwmon/corsair-cpro.c diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst new file mode 100644 index 000000000000..57de8f4d630b --- /dev/null +++ b/Documentation/hwmon/corsair-cpro.rst @@ -0,0 +1,43 @@ +Kernel driver corsair-cpro +========================== + +Supported devices: + + * Corsair Commander Pro + * Corsair Commander Pro (1000D) + +Author: Marius Zachmann + +Description +----------- + +This driver implements the sysfs interface for the Corsair Commander Pro. +The Corsair Commander Pro is a USB device with 6 fan connectors, +4 temperature sensor connectors and 2 Corsair LED connectors. +It can read the voltage levels on the SATA power connector. + +Usage Notes +----------- + +Since it is a USB device, hotswapping is possible. The device is autodetected. + +Sysfs entries +------------- + +in0_input Voltage on SATA 12v +in1_input Voltage on SATA 5v +in2_input Voltage on SATA 3.3v + +temp[1-4]_input Connected temperature sensors + +fan[1-6]_input Connected fan rpm. +fan[1-6]_label Shows connection status of the fan as detected by the + device. + "fanX nc" no connection + "fanX 3pin" 3-pin fan detected + "fanX 4pin" 4-pin fan detected +fan[1-6]_enable the driver only reports fan speeds when 1 + +pwm[1-6] Sets the fan speed. Values from 0-255. + When reading, it reports the last value if it was set by the driver. + Otherwise returns 0. diff --git a/MAINTAINERS b/MAINTAINERS index f08f290df174..169530c7eede 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4386,6 +4386,12 @@ S: Maintained F: Documentation/hwmon/coretemp.rst F: drivers/hwmon/coretemp.c +CORSAIR-CPRO HARDWARE MONITOR DRIVER +M: Marius Zachmann +L: linux-hwmon@vger.kernel.org +S: Maintained +F: drivers/hwmon/corsair-cpro.c + COSA/SRP SYNC SERIAL DRIVER M: Jan "Yenya" Kasprzak S: Maintained diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 288ae9f63588..8b046a5dfa40 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -439,6 +439,16 @@ config SENSORS_BT1_PVT_ALARMS the data conversion will be periodically performed and the data will be saved in the internal driver cache. +config SENSORS_CORSAIR_CPRO + tristate "Corsair Commander Pro controller" + depends on USB + help + If you say yes here you get support for the Corsair Commander Pro + controller. + + This driver can also be built as a module. If so, the module + will be called corsair-cpro. + config SENSORS_DRIVETEMP tristate "Hard disk drives with temperature sensors" depends on SCSI && ATA diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 3e32c21f5efe..18e1ef74ade7 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_AXI_FAN_CONTROL) += axi-fan-control.o obj-$(CONFIG_SENSORS_BT1_PVT) += bt1-pvt.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o +obj-$(CONFIG_SENSORS_CORSAIR_CPRO) += corsair-cpro.o obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o obj-$(CONFIG_SENSORS_DELL_SMM) += dell-smm-hwmon.o diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c new file mode 100644 index 000000000000..f7a4d80239c2 --- /dev/null +++ b/drivers/hwmon/corsair-cpro.c @@ -0,0 +1,451 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * corsair-cpro.c - Linux driver for Corsair Commander Pro + * Copyright (C) 2020 Marius Zachmann + */ + +#include +#include +#include +#include +#include +#include + +#define USB_VENDOR_ID_CORSAIR 0x1b1c +#define USB_PRODUCT_ID_CORSAIR_COMMANDERPRO 0x0c10 +#define USB_PRODUCT_ID_CORSAIR_1000D 0x1d00 + +#define OUT_BUFFER_SIZE 63 +#define IN_BUFFER_SIZE 16 +#define LABEL_LENGTH 11 + +#define CTL_GET_TMP 0x11 /* send: byte 1 is channel, rest zero */ + /* rcv: returns temp for channel in bytes 1 and 2 */ +#define CTL_GET_VOLT 0x12 /* send: byte 1 = rail number 12, 5, 3.3 */ + /* rcv: returns volt in bytes 1,2 */ +#define CTL_GET_FAN_CNCT 0x20 /* returns in bytes 1-6 */ + /* 0 for no connect */ + /* 1 for 3pin, 2 for 4pin */ +#define CTL_GET_FAN_RPM 0x21 /* works like CTL_GET_TMP */ +#define CTL_SET_FAN_FPWM 0x23 /* send: byte 1 is fan number */ + /* send: byte 2 is percentage from 0 - 100 */ + +struct ccp_device { + struct usb_device *udev; + struct mutex mutex; /* whenever buffer is used or usb calls are made */ + u8 *buffer; + int pwm[6]; + int fan_enable[6]; + char fan_label[6][LABEL_LENGTH]; +}; + +/* send 63 byte buffer and receive response in same buffer */ +static int send_usb_cmd(struct ccp_device *ccp) +{ + int ret; + int actual_length; + + ret = usb_bulk_msg(ccp->udev, usb_sndintpipe(ccp->udev, 2), ccp->buffer, OUT_BUFFER_SIZE, + &actual_length, 1000); + if (ret) { + dev_err(&ccp->udev->dev, "usb_bulk_msg send failed: %d", ret); + return ret; + } + + ret = usb_bulk_msg(ccp->udev, usb_rcvintpipe(ccp->udev, 1), ccp->buffer, IN_BUFFER_SIZE, + &actual_length, 1000); + if (ret) { + dev_err(&ccp->udev->dev, "usb_bulk_msg receive failed: %d", ret); + return ret; + } + + return 0; +} + +/* for commands, which return just a number depending on a channel: */ +/* get_temp, get_volt, get_fan_rpm */ +static int get_data(struct ccp_device *ccp, int command, int channel, long *val) +{ + int ret; + + mutex_lock(&ccp->mutex); + + memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE); + ccp->buffer[0] = command; + ccp->buffer[1] = channel; + ret = send_usb_cmd(ccp); + if (ret) + goto exit; + + *val = (ccp->buffer[1] << 8) + ccp->buffer[2]; + +exit: + mutex_unlock(&ccp->mutex); + return ret; +} + +static int set_pwm(struct ccp_device *ccp, int channel, long val) +{ + int ret; + + if (val < 0 || val > 255) + return -EINVAL; + + ccp->pwm[channel] = val; + + /* The Corsair Commander Pro uses values from 0-100 */ + val = DIV_ROUND_CLOSEST(val * 100, 255); + + mutex_lock(&ccp->mutex); + + memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE); + ccp->buffer[0] = CTL_SET_FAN_FPWM; + ccp->buffer[1] = channel; + ccp->buffer[2] = val; + ret = send_usb_cmd(ccp); + + mutex_unlock(&ccp->mutex); + return ret; +} + +static int get_fan_mode_label(struct ccp_device *ccp, int channel) +{ + int ret; + int mode; + + mutex_lock(&ccp->mutex); + + memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE); + ccp->buffer[0] = CTL_GET_FAN_CNCT; + ret = send_usb_cmd(ccp); + if (ret) + goto exit; + + mode = ccp->buffer[channel + 1]; + + switch (mode) { + case 0: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, "fan%d nc", channel + 1); + break; + case 1: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, "fan%d 3pin", channel + 1); + break; + case 2: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, "fan%d 4pin", channel + 1); + break; + default: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, "fan%d other", channel + 1); + break; + } + +exit: + mutex_unlock(&ccp->mutex); + return ret; +} + +static int get_voltage(struct ccp_device *ccp, int channel, long *val) +{ + int ret; + + ret = get_data(ccp, CTL_GET_VOLT, channel, val); + + return ret; +} + +static int get_temp(struct ccp_device *ccp, int channel, long *val) +{ + int ret; + + ret = get_data(ccp, CTL_GET_TMP, channel, val); + *val = *val * 10; + + return ret; +} + +static int get_rpm(struct ccp_device *ccp, int channel, long *val) +{ + int ret; + + if (!ccp->fan_enable[channel]) + return -ENODATA; + + ret = get_data(ccp, CTL_GET_FAN_RPM, channel, val); + + return ret; +} + +static int ccp_read_string(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + int ret; + struct ccp_device *ccp = dev_get_drvdata(dev); + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_label: + ret = get_fan_mode_label(ccp, channel); + if (ret == 0) + *str = ccp->fan_label[channel]; + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +} + +static int ccp_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + int ret = 0; + struct ccp_device *ccp = dev_get_drvdata(dev); + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + ret = get_temp(ccp, channel, val); + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + ret = get_rpm(ccp, channel, val); + break; + case hwmon_fan_enable: + *val = ccp->fan_enable[channel]; + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + /* how to read pwm values from the device is currently unknown */ + /* driver returns last set value or 0 */ + *val = ccp->pwm[channel]; + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + case hwmon_in: + switch (attr) { + case hwmon_in_input: + ret = get_voltage(ccp, channel, val); + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +}; + +static int ccp_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + int ret = 0; + struct ccp_device *ccp = dev_get_drvdata(dev); + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_enable: + if (val == 0 || val == 1) + ccp->fan_enable[channel] = val; + else + ret = -EINVAL; + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + ret = set_pwm(ccp, channel, val); + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +}; + +static umode_t ccp_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_chip: + switch (attr) { + case hwmon_chip_update_interval: + return 0644; + default: + break; + } + break; + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + return 0444; + default: + break; + } + break; + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + return 0444; + case hwmon_fan_label: + return 0444; + case hwmon_fan_enable: + return 0644; + default: + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + return 0644; + default: + break; + } + break; + case hwmon_in: + switch (attr) { + case hwmon_in_input: + return 0444; + default: + break; + } + break; + default: + break; + } + + return 0; +}; + +static const struct hwmon_ops ccp_hwmon_ops = { + .is_visible = ccp_is_visible, + .read = ccp_read, + .write = ccp_write, + .read_string = ccp_read_string, +}; + +static const struct hwmon_channel_info *ccp_info[] = { + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MAX, + HWMON_T_INPUT | HWMON_T_MAX, + HWMON_T_INPUT | HWMON_T_MAX, + HWMON_T_INPUT | HWMON_T_MAX + ), + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_ENABLE | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_ENABLE | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_ENABLE | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_ENABLE | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_ENABLE | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_ENABLE | HWMON_F_LABEL + ), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT + ), + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT + ), + NULL +}; + +static const struct hwmon_chip_info ccp_chip_info = { + .ops = &ccp_hwmon_ops, + .info = ccp_info, +}; + +static int ccp_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct ccp_device *ccp; + struct device *hwmon_dev; + + ccp = devm_kzalloc(&intf->dev, sizeof(struct ccp_device), GFP_KERNEL); + if (!ccp) + return -ENOMEM; + + ccp->buffer = devm_kmalloc(&intf->dev, OUT_BUFFER_SIZE, GFP_KERNEL); + if (!ccp->buffer) + return -ENOMEM; + + mutex_init(&ccp->mutex); + + ccp->fan_enable[0] = 1; + ccp->fan_enable[1] = 1; + ccp->fan_enable[2] = 1; + ccp->fan_enable[3] = 1; + ccp->fan_enable[4] = 1; + ccp->fan_enable[5] = 1; + ccp->udev = interface_to_usbdev(intf); + + hwmon_dev = devm_hwmon_device_register_with_info(&intf->dev, "corsaircpro", ccp, + &ccp_chip_info, 0); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +void ccp_disconnect(struct usb_interface *intf) +{ +} + +static const struct usb_device_id ccp_devices[] = { + { USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_COMMANDERPRO) }, + { USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_1000D) }, + { } +}; + +static struct usb_driver ccp_driver = { + .name = "corsair-cpro", + .id_table = ccp_devices, + .probe = ccp_probe, + .disconnect = ccp_disconnect +}; + +MODULE_DEVICE_TABLE(usb, ccp_devices); +MODULE_LICENSE("GPL"); + +module_usb_driver(ccp_driver); -- 2.27.0