linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Al Stone <ahs3@redhat.com>
To: Viresh Kumar <viresh.kumar@linaro.org>, ashwinch@google.com
Cc: rjw@rjwysocki.net, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org,
	Prashanth Prakash <pprakash@codeaurora.org>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>
Subject: Re: [PATCH v5] Force cppc_cpufreq to report values in KHz to fix user space reporting
Date: Mon, 22 Aug 2016 11:16:18 -0600	[thread overview]
Message-ID: <406534f5-5e45-237e-cc68-2b57631e26d1@redhat.com> (raw)
In-Reply-To: <872a4dd4-a752-507b-e720-ec2e6003bd8c@redhat.com>

Maybe a top-post will get attention....

Yet another ping; this was first submitted on 20 July, and has received
no comments.  It has now been a month and other architectures are starting
to use CPPC so they will run into the same errors that this fixes.  Can
I get an ACK, NAK, or further instructions, please?

Also adding Rafael on the ACPI side, just in case, since he's also reviewing
the Intel patches on the linux-acpi mailing list that are adding CPPC usage.

On 08/11/2016 12:15 PM, Al Stone wrote:
> On 08/01/2016 02:31 PM, Viresh Kumar wrote:
>> [+ Ashwin's new email id..]
>>
>> On 20-07-16, 15:10, Al Stone wrote:
>>> When CPPC is being used by ACPI on arm64, user space tools such as
>>> cpupower report CPU frequency values from sysfs that are incorrect.
>>>
>>> What the driver was doing was reporting the values given by ACPI tables
>>> in whatever scale was used to provide them.  However, the ACPI spec
>>> defines the CPPC values as unitless abstract numbers.  Internal kernel
>>> structures such as struct perf_cap, in contrast, expect these values
>>> to be in KHz.  When these struct values get reported via sysfs, the
>>> user space tools also assume they are in KHz, causing them to report
>>> incorrect values (for example, reporting a CPU frequency of 1MHz when
>>> it should be 1.8GHz).
>>>
>>> The downside is that this approach has some assumptions:
>>>
>>>    (1) It relies on SMBIOS3 being used, *and* that the Max Frequency
>>>    value for a processor is set to a non-zero value.
>>>
>>>    (2) It assumes that all processors run at the same speed, or that
>>>    the CPPC values have all been scaled to reflect relative speed.
>>>    This patch retrieves the largest CPU Max Frequency from a type 4 DMI
>>>    record that it can find.  This may not be an issue, however, as a
>>>    sampling of DMI data on x86 and arm64 indicates there is often only
>>>    one such record regardless.  Since CPPC is relatively new, it is
>>>    unclear if the ACPI ASL will always be written to reflect any sort
>>>    of relative performance of processors of differing speeds.
>>>
>>>    (3) It assumes that performance and frequency both scale linearly.
>>>
>>> For arm64 servers, this may be sufficient, but it does rely on
>>> firmware values being set correctly.  Hence, other approaches will
>>> be considered in the future.
>>>
>>> This has been tested on three arm64 servers, with and without DMI, with
>>> and without CPPC support.
>>>
>>> Changes for v5:
>>>     -- Move code to cpufreq/cppc_cpufreq.c from acpi/cppc_acpi.c to keep
>>>        frequency-related code together, and keep the CPPC abstract scale
>>>        in ACPI (Prashanth Prakash)
>>>     -- Fix the scaling to remove the incorrect assumption that frequency
>>>        was always a range from zero to max; as a practical matter, it is
>>>        not (Prasanth Prakash); this also allowed us to remove an over-
>>>        engineered function to do this math.
>>>
>>> Changes for v4:
>>>     -- Replaced magic constants with #defines (Rafael Wysocki)
>>>     -- Renamed cppc_unitless_to_khz() to cppc_to_khz() (Rafael Wysocki)
>>>     -- Replaced hidden initialization with a clearer form (Rafael Wysocki)
>>>     -- Instead of picking up the first Max Speed value from DMI, we will
>>>        now get the largest Max Speed; still an approximation, but slightly
>>>        less subject to error (Rafael Wysocki)
>>>     -- Kconfig for cppc_cpufreq now depends on DMI, instead of selecting
>>>        it, in order to make sure DMI is set up properly (Rafael Wysocki)
>>>
>>> Changes for v3:
>>>     -- Added clarifying commentary re short-term vs long-term fix (Alexey
>>>        Klimov)
>>>     -- Added range checking code to ensure proper arithmetic occurs,
>>>        especially no division by zero (Alexey Klimov)
>>>
>>> Changes for v2:
>>>     -- Corrected thinko: needed to have DEPENDS on DMI in Kconfig.arm,
>>>        not SELECT DMI (found by build daemon)
>>>
>>> Signed-off-by: Al Stone <ahs3@redhat.com>
>>> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org>
>>> ---
>>>  drivers/cpufreq/cppc_cpufreq.c | 53 ++++++++++++++++++++++++++++++++++++++----
>>>  1 file changed, 49 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
>>> index 8882b8e..6debc18 100644
>>> --- a/drivers/cpufreq/cppc_cpufreq.c
>>> +++ b/drivers/cpufreq/cppc_cpufreq.c
>>> @@ -19,10 +19,19 @@
>>>  #include <linux/delay.h>
>>>  #include <linux/cpu.h>
>>>  #include <linux/cpufreq.h>
>>> +#include <linux/dmi.h>
>>>  #include <linux/vmalloc.h>
>>>  
>>> +#include <asm/unaligned.h>
>>> +
>>>  #include <acpi/cppc_acpi.h>
>>>  
>>> +/* Minimum struct length needed for the DMI processor entry we want */
>>> +#define DMI_ENTRY_PROCESSOR_MIN_LENGTH	48
>>> +
>>> +/* Offest in the DMI processor structure for the max frequency */
>>> +#define DMI_PROCESSOR_MAX_SPEED  0x14
>>> +
>>>  /*
>>>   * These structs contain information parsed from per CPU
>>>   * ACPI _CPC structures.
>>> @@ -32,6 +41,39 @@
>>>   */
>>>  static struct cpudata **all_cpu_data;
>>>  
>>> +/* Capture the max KHz from DMI */
>>> +static u64 cppc_dmi_max_khz;
>>> +
>>> +/* Callback function used to retrieve the max frequency from DMI */
>>> +static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private)
>>> +{
>>> +	const u8 *dmi_data = (const u8 *)dm;
>>> +	u16 *mhz = (u16 *)private;
>>> +
>>> +	if (dm->type == DMI_ENTRY_PROCESSOR &&
>>> +	    dm->length >= DMI_ENTRY_PROCESSOR_MIN_LENGTH) {
>>> +		u16 val = (u16)get_unaligned((const u16 *)
>>> +				(dmi_data + DMI_PROCESSOR_MAX_SPEED));
>>> +		*mhz = val > *mhz ? val : *mhz;
>>> +	}
>>> +}
>>> +
>>> +/* Look up the max frequency in DMI */
>>> +static u64 cppc_get_dmi_max_khz(void)
>>> +{
>>> +	u16 mhz = 0;
>>> +
>>> +	dmi_walk(cppc_find_dmi_mhz, &mhz);
>>> +
>>> +	/*
>>> +	 * Real stupid fallback value, just in case there is no
>>> +	 * actual value set.
>>> +	 */
>>> +	mhz = mhz ? mhz : 1;
>>> +
>>> +	return (1000 * mhz);
>>> +}
>>> +
>>>  static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,
>>>  		unsigned int target_freq,
>>>  		unsigned int relation)
>>> @@ -42,7 +84,7 @@ static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,
>>>  
>>>  	cpu = all_cpu_data[policy->cpu];
>>>  
>>> -	cpu->perf_ctrls.desired_perf = target_freq;
>>> +	cpu->perf_ctrls.desired_perf = target_freq * policy->max / cppc_dmi_max_khz;
>>>  	freqs.old = policy->cur;
>>>  	freqs.new = target_freq;
>>>  
>>> @@ -94,8 +136,10 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
>>>  		return ret;
>>>  	}
>>>  
>>> -	policy->min = cpu->perf_caps.lowest_perf;
>>> -	policy->max = cpu->perf_caps.highest_perf;
>>> +	cppc_dmi_max_khz = cppc_get_dmi_max_khz();
>>> +
>>> +	policy->min = cpu->perf_caps.lowest_perf * cppc_dmi_max_khz / cpu->perf_caps.highest_perf;
>>> +	policy->max = cppc_dmi_max_khz;
>>>  	policy->cpuinfo.min_freq = policy->min;
>>>  	policy->cpuinfo.max_freq = policy->max;
>>>  	policy->shared_type = cpu->shared_type;
>>> @@ -112,7 +156,8 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
>>>  	cpu->cur_policy = policy;
>>>  
>>>  	/* Set policy->cur to max now. The governors will adjust later. */
>>> -	policy->cur = cpu->perf_ctrls.desired_perf = cpu->perf_caps.highest_perf;
>>> +	policy->cur = cppc_dmi_max_khz;
>>> +	cpu->perf_ctrls.desired_perf = cpu->perf_caps.highest_perf;
>>>  
>>>  	ret = cppc_set_perf(cpu_num, &cpu->perf_ctrls);
>>>  	if (ret)
>>> -- 
>>> 2.7.4
>>
> 
> Another gentle ping -- any comments?  Can this get pulled in now?
> 
> Thanks.
> 


-- 
ciao,
al
-----------------------------------
Al Stone
Software Engineer
Red Hat, Inc.
ahs3@redhat.com
-----------------------------------

  reply	other threads:[~2016-08-22 17:16 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-20 21:10 [PATCH v5] Force cppc_cpufreq to report values in KHz to fix user space reporting Al Stone
2016-08-01 20:07 ` Al Stone
2016-08-01 20:31 ` Viresh Kumar
2016-08-11 18:15   ` Al Stone
2016-08-22 17:16     ` Al Stone [this message]
2016-08-22 17:45       ` Ashwin Chaugule
2016-08-22 18:12         ` Al Stone
2016-08-23  4:31           ` Pandruvada, Srinivas
2016-08-23 16:14             ` Al Stone
2016-08-25 22:00               ` Pandruvada, Srinivas
2016-08-30 17:09                 ` Al Stone
2016-09-14  1:09 ` Rafael J. Wysocki
2016-09-19 18:53   ` Al Stone

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=406534f5-5e45-237e-cc68-2b57631e26d1@redhat.com \
    --to=ahs3@redhat.com \
    --cc=ashwinch@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=pprakash@codeaurora.org \
    --cc=rjw@rjwysocki.net \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).