linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wang Honghui <honghui.wang@ucas.com.cn>
To: Sudeep Holla <sudeep.holla@arm.com>,
	Cristian Marussi <cristian.marussi@arm.com>,
	Jassi Brar <jassisinghbrar@gmail.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH]mailbox/arm_scpi: Add to support Phytium FT2000/4 CPUs, show temperature of cpu.
Date: Thu, 1 Dec 2022 15:08:33 +0800	[thread overview]
Message-ID: <414EB9088FC46457+Y4hS8eOJa/XUQ8xR@TP-P15V> (raw)

Add to support Phytium FT2000/4 CPUs, show temperature of cpu.

Signed-off-by: Wang Honghui <honghui.wang@ucas.com.cn>
---
 drivers/firmware/arm_scpi.c       |   1 +
 drivers/mailbox/Kconfig           |   6 +
 drivers/mailbox/Makefile          |   2 +
 drivers/mailbox/phytium_mailbox.c | 193 ++++++++++++++++++++++++++++++
 4 files changed, 202 insertions(+)
 create mode 100644 drivers/mailbox/phytium_mailbox.c

diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index 435d0e2658a4..876eb2f9ff81 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -904,6 +904,7 @@ static const struct of_device_id shmem_of_match[] __maybe_unused = {
 	{ .compatible = "amlogic,meson-axg-scp-shmem", },
 	{ .compatible = "arm,juno-scp-shmem", },
 	{ .compatible = "arm,scp-shmem", },
+	{ .compatible = "phytium,ft2004-scpi-shmem", },
 	{ }
 };
 
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index 05d6fae800e3..4d08e8ebc831 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -41,6 +41,12 @@ config IMX_MBOX
 	help
 	  Mailbox implementation for i.MX Messaging Unit (MU).
 
+config PHYTIUM_MBOX
+        tristate "Phytium SoC Mailbox Support"
+        depends on ARM_AMBA || COMPILE_TEST
+        help
+          This driver provides the support for the Phytium mailbox controller.
+
 config PLATFORM_MHU
 	tristate "Platform MHU Mailbox"
 	depends on OF
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index fc9376117111..e46cb9b29369 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -11,6 +11,8 @@ obj-$(CONFIG_ARM_MHU_V2)	+= arm_mhuv2.o
 
 obj-$(CONFIG_IMX_MBOX)	+= imx-mailbox.o
 
+obj-$(CONFIG_PHYTIUM_MBOX)      += phytium_mailbox.o
+
 obj-$(CONFIG_ARMADA_37XX_RWTM_MBOX)	+= armada-37xx-rwtm-mailbox.o
 
 obj-$(CONFIG_PLATFORM_MHU)	+= platform_mhu.o
diff --git a/drivers/mailbox/phytium_mailbox.c b/drivers/mailbox/phytium_mailbox.c
new file mode 100644
index 000000000000..8211db1d2ca0
--- /dev/null
+++ b/drivers/mailbox/phytium_mailbox.c
@@ -0,0 +1,193 @@
+/*
+ * Phytium SoC mailbox driver
+ *
+ * Copyright (c) 2020 Phytium Corporation.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mailbox_controller.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#define INTR_STAT	0x0
+#define INTR_SET	0x8
+#define INTR_CLR	0x10
+
+#define TX_REG		0x100
+
+#define NR_CHANS	1
+
+struct phytium_mbox_link {
+	unsigned irq;
+	void __iomem *tx_reg;
+	void __iomem *rx_reg;
+};
+
+struct phytium_mbox {
+	void __iomem *base;
+	struct phytium_mbox_link mlink;
+	struct mbox_chan chan;
+	struct mbox_controller mbox;
+};
+
+static irqreturn_t phytium_mbox_rx_irq(int irq, void *ch)
+{
+	struct mbox_chan *chan = ch;
+	struct phytium_mbox_link *mlink = chan->con_priv;
+	u32 val;
+
+	val = readl_relaxed(mlink->rx_reg + INTR_STAT);
+	if (!val)
+		return IRQ_NONE;
+
+	mbox_chan_received_data(chan, (void *)&val);
+
+	writel_relaxed(val, mlink->rx_reg + INTR_CLR);
+
+	return IRQ_HANDLED;
+}
+
+static int phytium_mbox_send_data(struct mbox_chan *chan, void *data)
+{
+	struct phytium_mbox_link *mlink = chan->con_priv;
+	u32 *arg = data;
+
+	writel_relaxed(*arg, mlink->tx_reg + INTR_SET);
+
+	return 0;
+}
+
+static int phytium_mbox_startup(struct mbox_chan *chan)
+{
+	struct phytium_mbox_link *mlink = chan->con_priv;
+	u32 val;
+	int ret;
+
+	val = readl_relaxed(mlink->tx_reg + INTR_STAT);
+	writel_relaxed(val, mlink->tx_reg + INTR_CLR);
+
+	ret = request_irq(mlink->irq, phytium_mbox_rx_irq,
+			  IRQF_SHARED, "phytium_mbox_link", chan);
+	if (ret) {
+		dev_err(chan->mbox->dev,
+			"Unable to acquire IRQ %d\n", mlink->irq);
+	}
+
+	return ret;
+}
+
+static void phytium_mbox_shutdown(struct mbox_chan *chan)
+{
+	struct phytium_mbox_link *mlink = chan->con_priv;
+
+	free_irq(mlink->irq, chan);
+}
+
+static bool phytium_mbox_last_tx_done(struct mbox_chan *chan)
+{
+	struct phytium_mbox_link *mlink = chan->con_priv;
+	u32 val = readl_relaxed(mlink->tx_reg + INTR_STAT);
+
+	return (val == (u32)(1U << 31));
+}
+
+static const struct mbox_chan_ops phytium_mbox_ops = {
+	.send_data = phytium_mbox_send_data,
+	.startup = phytium_mbox_startup,
+	.shutdown = phytium_mbox_shutdown,
+	.last_tx_done = phytium_mbox_last_tx_done,
+};
+
+static const struct of_device_id phytium_mbox_of_match[] = {
+	{ .compatible = "phytium,mbox", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, phytium_mbox_of_match);
+
+static int phytium_mbox_probe(struct platform_device *pdev)
+{
+	struct phytium_mbox *mbox;
+	struct resource *res;
+	int err, irq;
+
+	/* Allocate memory for device */
+	mbox = devm_kzalloc(&pdev->dev, sizeof(*mbox), GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mbox->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mbox->base)) {
+		dev_err(&pdev->dev, "ioremap base failed\n");
+		return PTR_ERR(mbox->base);
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "cannot obtain irq\n");
+		return irq;
+	}
+
+	mbox->chan.con_priv = &mbox->mlink;
+	mbox->mlink.irq = irq;
+	mbox->mlink.rx_reg = mbox->base;
+	mbox->mlink.tx_reg = mbox->mlink.rx_reg + TX_REG;
+
+	mbox->mbox.dev = &pdev->dev;
+	mbox->mbox.chans = &mbox->chan;
+	mbox->mbox.num_chans = NR_CHANS;
+	mbox->mbox.ops = &phytium_mbox_ops;
+	mbox->mbox.txdone_irq = false;
+	mbox->mbox.txdone_poll = true;
+	mbox->mbox.txpoll_period = 1;
+
+	platform_set_drvdata(pdev, mbox);
+
+	err = mbox_controller_register(&mbox->mbox);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to register mailboxes %d\n", err);
+		goto fail;
+	}
+
+	dev_info(&pdev->dev, "Phytium SoC Mailbox registered\n");
+fail:
+	return err;
+}
+
+static int phytium_mbox_remove(struct platform_device *pdev)
+{
+	struct phytium_mbox *mbox = platform_get_drvdata(pdev);
+
+	mbox_controller_unregister(&mbox->mbox);
+
+	return 0;
+}
+
+static struct platform_driver phytium_mbox_driver = {
+	.probe = phytium_mbox_probe,
+	.remove = phytium_mbox_remove,
+	.driver = {
+		.name = "phytium-mbox",
+		.of_match_table = of_match_ptr(phytium_mbox_of_match),
+	},
+};
+
+module_platform_driver(phytium_mbox_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Phytium SoC Mailbox Driver");
+MODULE_AUTHOR("Chen Baozi <chenbaozi@phytium.com.cn>");
-- 
2.34.1


             reply	other threads:[~2022-12-01  7:09 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-01  7:08 Wang Honghui [this message]
2022-12-01 10:25 ` [PATCH]mailbox/arm_scpi: Add to support Phytium FT2000/4 CPUs, show temperature of cpu Sudeep Holla
2022-12-14 10:08 ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=414EB9088FC46457+Y4hS8eOJa/XUQ8xR@TP-P15V \
    --to=honghui.wang@ucas.com.cn \
    --cc=cristian.marussi@arm.com \
    --cc=jassisinghbrar@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sudeep.holla@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).