From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: magnus.damm@gmail.com, geert@glider.be, mchehab@kernel.org,
hverkuil@xs4all.nl, linux-renesas-soc@vger.kernel.org,
linux-media@vger.kernel.org, linux-sh@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 05/10] arch: sh: migor: Use new renesas-ceu camera driver
Date: Mon, 11 Dec 2017 16:36:35 +0200 [thread overview]
Message-ID: <4183102.bdehOrmzvR@avalon> (raw)
In-Reply-To: <1510743363-25798-6-git-send-email-jacopo+renesas@jmondi.org>
Hi Jacopo,
Thank you for the patch.
On Wednesday, 15 November 2017 12:55:58 EET Jacopo Mondi wrote:
> Migo-R platform uses sh_mobile_ceu camera driver, which is now being
> replaced by a proper V4L2 camera driver named 'renesas-ceu'.
>
> Move Migo-R platform to use the v4l2 renesas-ceu camera driver
> interface and get rid of soc_camera defined components used to register
> sensor drivers.
>
> Also, memory for CEU video buffers is now reserved with membocks APIs,
> and need to be declared as dma_coherent during machine initialization to
> remove that architecture specific part from CEU driver.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
> arch/sh/boards/mach-migor/setup.c | 164 ++++++++++++++++------------------
> 1 file changed, 76 insertions(+), 88 deletions(-)
>
> diff --git a/arch/sh/boards/mach-migor/setup.c
> b/arch/sh/boards/mach-migor/setup.c index 98aa094..10a9b3c 100644
> --- a/arch/sh/boards/mach-migor/setup.c
> +++ b/arch/sh/boards/mach-migor/setup.c
> @@ -27,7 +27,7 @@
> #include <linux/videodev2.h>
> #include <linux/sh_intc.h>
> #include <video/sh_mobile_lcdc.h>
> -#include <media/drv-intf/sh_mobile_ceu.h>
> +#include <media/drv-intf/renesas-ceu.h>
> #include <media/i2c/ov772x.h>
> #include <media/soc_camera.h>
> #include <media/i2c/tw9910.h>
> @@ -308,62 +308,80 @@ static struct platform_device migor_lcdc_device = {
> static struct clk *camera_clk;
> static DEFINE_MUTEX(camera_lock);
>
> -static void camera_power_on(int is_tw)
> +static void camera_vio_clk_on(void)
> {
> - mutex_lock(&camera_lock);
> -
> /* Use 10 MHz VIO_CKO instead of 24 MHz to work
> * around signal quality issues on Panel Board V2.1.
> */
> camera_clk = clk_get(NULL, "video_clk");
> clk_set_rate(camera_clk, 10000000);
> clk_enable(camera_clk); /* start VIO_CKO */
> -
> - /* use VIO_RST to take camera out of reset */
> - mdelay(10);
> - if (is_tw) {
> - gpio_set_value(GPIO_PTT2, 0);
> - gpio_set_value(GPIO_PTT0, 0);
> - } else {
> - gpio_set_value(GPIO_PTT0, 1);
> - }
> - gpio_set_value(GPIO_PTT3, 0);
> - mdelay(10);
> - gpio_set_value(GPIO_PTT3, 1);
> - mdelay(10); /* wait to let chip come out of reset */
> }
>
> -static void camera_power_off(void)
> +static void camera_disable(void)
> {
> - clk_disable(camera_clk); /* stop VIO_CKO */
> + /* stop VIO_CKO */
> + clk_disable(camera_clk);
> clk_put(camera_clk);
>
> + gpio_set_value(GPIO_PTT0, 0);
> + gpio_set_value(GPIO_PTT2, 1);
> gpio_set_value(GPIO_PTT3, 0);
> +
> mutex_unlock(&camera_lock);
> }
>
> -static int ov7725_power(struct device *dev, int mode)
> +static void camera_reset(void)
> {
> - if (mode)
> - camera_power_on(0);
> - else
> - camera_power_off();
> + /* use VIO_RST to take camera out of reset */
> + gpio_set_value(GPIO_PTT3, 0);
> + mdelay(10);
> + gpio_set_value(GPIO_PTT3, 1);
> + mdelay(10);
> +}
> +
> +static int ov7725_enable(void)
> +{
> + mutex_lock(&camera_lock);
> + camera_vio_clk_on();
> + mdelay(10);
> + gpio_set_value(GPIO_PTT0, 1);
> +
> + camera_reset();
>
> return 0;
> }
>
> -static int tw9910_power(struct device *dev, int mode)
> +static int tw9910_enable(void)
> {
> - if (mode)
> - camera_power_on(1);
> - else
> - camera_power_off();
> + mutex_lock(&camera_lock);
> + camera_vio_clk_on();
> + mdelay(10);
> + gpio_set_value(GPIO_PTT2, 0);
> +
> + camera_reset();
>
> return 0;
> }
Can't all these be moved to drivers by using the GPIO, clock and regulator
APIs ? We should really try to get rid of platform callbacks. Apart from the
patch patch looks good to me.
> -static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
> - .flags = SH_CEU_FLAG_USE_8BIT_BUS,
> +static struct ceu_info ceu_info = {
> + .num_subdevs = 2,
> + .subdevs = {
> + { /* [0] = ov772x */
> + .flags = CEU_FLAG_PRIMARY_SENS,
> + .bus_width = 8,
> + .bus_shift = 0,
> + .i2c_adapter_id = 0,
> + .i2c_address = 0x21,
> + },
> + { /* [1] = tw9910 */
> + .flags = 0,
> + .bus_width = 8,
> + .bus_shift = 0,
> + .i2c_adapter_id = 0,
> + .i2c_address = 0x45,
> + },
> + },
> };
>
> static struct resource migor_ceu_resources[] = {
> @@ -377,18 +395,15 @@ static struct resource migor_ceu_resources[] = {
> .start = evt2irq(0x880),
> .flags = IORESOURCE_IRQ,
> },
> - [2] = {
> - /* place holder for contiguous memory */
> - },
> };
>
> static struct platform_device migor_ceu_device = {
> - .name = "sh_mobile_ceu",
> + .name = "renesas-ceu",
> .id = 0, /* "ceu0" clock */
> .num_resources = ARRAY_SIZE(migor_ceu_resources),
> .resource = migor_ceu_resources,
> .dev = {
> - .platform_data = &sh_mobile_ceu_info,
> + .platform_data = &ceu_info,
> },
> };
>
> @@ -427,6 +442,19 @@ static struct platform_device sdhi_cn9_device = {
> },
> };
>
> +static struct ov772x_camera_info ov7725_info = {
> + .platform_enable = ov7725_enable,
> + .platform_disable = camera_disable,
> +};
> +
> +static struct tw9910_video_info tw9910_info = {
> + .buswidth = TW9910_DATAWIDTH_8,
> + .mpout = TW9910_MPO_FIELD,
> +
> + .platform_enable = tw9910_enable,
> + .platform_disable = camera_disable,
> +};
> +
> static struct i2c_board_info migor_i2c_devices[] = {
> {
> I2C_BOARD_INFO("rs5c372b", 0x32),
> @@ -438,51 +466,13 @@ static struct i2c_board_info migor_i2c_devices[] = {
> {
> I2C_BOARD_INFO("wm8978", 0x1a),
> },
> -};
> -
> -static struct i2c_board_info migor_i2c_camera[] = {
> {
> I2C_BOARD_INFO("ov772x", 0x21),
> + .platform_data = &ov7725_info,
> },
> {
> I2C_BOARD_INFO("tw9910", 0x45),
> - },
> -};
> -
> -static struct ov772x_camera_info ov7725_info;
> -
> -static struct soc_camera_link ov7725_link = {
> - .power = ov7725_power,
> - .board_info = &migor_i2c_camera[0],
> - .i2c_adapter_id = 0,
> - .priv = &ov7725_info,
> -};
> -
> -static struct tw9910_video_info tw9910_info = {
> - .buswidth = SOCAM_DATAWIDTH_8,
> - .mpout = TW9910_MPO_FIELD,
> -};
> -
> -static struct soc_camera_link tw9910_link = {
> - .power = tw9910_power,
> - .board_info = &migor_i2c_camera[1],
> - .i2c_adapter_id = 0,
> - .priv = &tw9910_info,
> -};
> -
> -static struct platform_device migor_camera[] = {
> - {
> - .name = "soc-camera-pdrv",
> - .id = 0,
> - .dev = {
> - .platform_data = &ov7725_link,
> - },
> - }, {
> - .name = "soc-camera-pdrv",
> - .id = 1,
> - .dev = {
> - .platform_data = &tw9910_link,
> - },
> + .platform_data = &tw9910_info,
> },
> };
>
> @@ -490,12 +480,9 @@ static struct platform_device *migor_devices[]
> __initdata = { &smc91x_eth_device,
> &sh_keysc_device,
> &migor_lcdc_device,
> - &migor_ceu_device,
> &migor_nor_flash_device,
> &migor_nand_flash_device,
> &sdhi_cn9_device,
> - &migor_camera[0],
> - &migor_camera[1],
> };
>
> extern char migor_sdram_enter_start;
> @@ -505,8 +492,6 @@ extern char migor_sdram_leave_end;
>
> static int __init migor_devices_setup(void)
> {
> - struct resource *r;
> -
> /* register board specific self-refresh code */
> sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
> &migor_sdram_enter_start,
> @@ -651,16 +636,19 @@ static int __init migor_devices_setup(void)
> */
> __raw_writew(__raw_readw(PORT_MSELCRA) | 1, PORT_MSELCRA);
>
> - /* Setup additional memory resource for CEU video buffers */
> - r = &migor_ceu_device.resource[2];
> - r->flags = IORESOURCE_MEM;
> - r->start = ceu_dma_membase;
> - r->end = r->start + CEU_BUFFER_MEMORY_SIZE - 1;
> - r->name = "ceu";
> -
> i2c_register_board_info(0, migor_i2c_devices,
> ARRAY_SIZE(migor_i2c_devices));
>
> + /* Initialize CEU platform device separately to map memory first */
> + device_initialize(&migor_ceu_device.dev);
> + arch_setup_pdev_archdata(&migor_ceu_device);
> + dma_declare_coherent_memory(&migor_ceu_device.dev,
> + ceu_dma_membase, ceu_dma_membase,
> + ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1,
> + DMA_MEMORY_EXCLUSIVE);
> +
> + platform_device_add(&migor_ceu_device);
> +
> return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
> }
> arch_initcall(migor_devices_setup);
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2017-12-11 14:36 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-15 10:55 [PATCH v1 00/10] Renesas Capture Engine Unit (CEU) V4L2 driver Jacopo Mondi
2017-11-15 10:55 ` [PATCH v1 01/10] dt-bindings: media: Add Renesas CEU bindings Jacopo Mondi
2017-11-15 11:32 ` Kieran Bingham
2017-11-15 12:33 ` Sakari Ailus
2017-12-11 14:24 ` Laurent Pinchart
2017-11-15 13:07 ` Geert Uytterhoeven
2017-11-15 18:15 ` jacopo mondi
2017-11-15 18:39 ` Geert Uytterhoeven
2017-11-15 10:55 ` [PATCH v1 02/10] include: media: Add Renesas CEU driver interface Jacopo Mondi
2017-11-15 12:36 ` Sakari Ailus
2017-12-11 14:26 ` Laurent Pinchart
2017-12-11 14:32 ` Laurent Pinchart
2017-11-15 10:55 ` [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver Jacopo Mondi
2017-11-15 12:45 ` Sakari Ailus
2017-11-15 14:25 ` jacopo mondi
2017-11-17 0:36 ` Sakari Ailus
2017-11-17 9:33 ` jacopo mondi
2017-11-25 15:56 ` Sakari Ailus
2017-11-25 18:17 ` jacopo mondi
2017-12-11 15:04 ` Laurent Pinchart
2017-12-11 16:15 ` Laurent Pinchart
2017-12-18 12:25 ` jacopo mondi
2017-12-18 15:28 ` Laurent Pinchart
2017-12-21 16:27 ` jacopo mondi
2017-12-22 12:03 ` Laurent Pinchart
2017-12-22 14:40 ` jacopo mondi
2017-12-23 11:39 ` Laurent Pinchart
2017-12-19 11:57 ` jacopo mondi
2017-12-19 13:07 ` Laurent Pinchart
2017-12-19 13:28 ` Sakari Ailus
2017-12-19 13:52 ` Laurent Pinchart
2017-12-13 12:03 ` Hans Verkuil
2017-12-18 14:12 ` jacopo mondi
2017-11-15 10:55 ` [PATCH v1 04/10] ARM: dts: r7s72100: Add Capture Engine Unit (CEU) Jacopo Mondi
2017-11-17 14:22 ` Simon Horman
2017-11-23 9:41 ` Geert Uytterhoeven
2017-11-15 10:55 ` [PATCH v1 05/10] arch: sh: migor: Use new renesas-ceu camera driver Jacopo Mondi
2017-12-11 14:36 ` Laurent Pinchart [this message]
2017-12-12 10:00 ` Laurent Pinchart
2017-11-15 10:55 ` [PATCH v1 06/10] sh: sh7722: Rename CEU clock Jacopo Mondi
2017-11-15 13:13 ` Geert Uytterhoeven
2017-11-17 9:15 ` jacopo mondi
2017-11-15 10:56 ` [PATCH v1 07/10] v4l: i2c: Copy ov772x soc_camera sensor driver Jacopo Mondi
2017-12-11 14:49 ` Laurent Pinchart
2017-12-13 12:10 ` Hans Verkuil
2017-12-13 13:02 ` Philippe Ombredanne
2017-11-15 10:56 ` [PATCH v1 08/10] media: i2c: ov772x: Remove soc_camera dependencies Jacopo Mondi
2017-11-17 0:43 ` Sakari Ailus
2017-11-17 9:14 ` jacopo mondi
2017-11-25 16:04 ` Sakari Ailus
2017-12-11 14:47 ` Laurent Pinchart
2017-11-15 10:56 ` [PATCH v1 09/10] v4l: i2c: Copy tw9910 soc_camera sensor driver Jacopo Mondi
2017-12-11 14:50 ` Laurent Pinchart
2017-11-15 10:56 ` [PATCH v1 10/10] media: i2c: tw9910: Remove soc_camera dependencies Jacopo Mondi
2017-12-11 14:55 ` Laurent Pinchart
2017-12-13 12:13 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4183102.bdehOrmzvR@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=geert@glider.be \
--cc=hverkuil@xs4all.nl \
--cc=jacopo+renesas@jmondi.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).