Re: [7/7] LEON SPARC V8 processor support for linux-2.6.10

[Jiri Gaisler <jiri@gaisler.com>]

[-- Attachment #1: Type: text/plain, Size: 1093 bytes --]

Leon2 serial+ethermac driver, updated.

[7/7] diff2.6.10_driver_serial.diff:      diff for drivers/serial


Alan Cox wrote:
> On Maw, 2005-01-04 at 19:04, Jiri Gaisler wrote:
> 
>>+            if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
>>+			tty->flip.work.func((void *)tty);
>>+			if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
>>+				printk(KERN_WARNING "TTY_DONT_FLIP set\n");
>>+				return;
>>+			}
> 
> 
> This code is broken. Please copy the fixes from the other
> drivers/serial/*.c files as you've copied a bug from the reference code.
> There are some other small cleanups in the base code that are worth
> adding too in particular removing direct (ab)use of tty->flip. because
> that will be changing some time in the future (when I finish debugging
> the tty layer mess)
> 
> 
> .
> 

-- 
--------------------------------------------------------------------------
Gaisler Research, 1:a Långgatan 19, 413 27 Goteborg, Sweden, +46-317758650
fax: +46-31421407 email: info@gaisler.com, home page: www.gaisler.com
--------------------------------------------------------------------------



[-- Attachment #2: diff2.6.10_driver_serial.diff --]
[-- Type: text/plain, Size: 17354 bytes --]

diff -Naur ../linux-2.6.10/drivers/serial/Kconfig linux-2.6.10/drivers/serial/Kconfig
--- ../linux-2.6.10/drivers/serial/Kconfig	2004-12-24 22:35:28.000000000 +0100
+++ linux-2.6.10/drivers/serial/Kconfig	2005-01-05 12:07:18.000000000 +0100
@@ -779,4 +779,17 @@
 	  If you use an M3T-M32700UT or an OPSPUT platform,
 	  please say Y.
 
+config SERIAL_LEON
+	tristate "Leon SoC serial support"
+	depends on LEON && !LEON_3
+	help
+	  UArt driver for the Leon Soc (www.gaisler.com)
+
+config SERIAL_LEON_CONSOLE
+	bool "Leon serial console"
+	depends on LEON && SERIAL_LEON
+	select SERIAL_CORE_CONSOLE
+	help
+	  Running a console on Leon uart
+
 endmenu
diff -Naur ../linux-2.6.10/drivers/serial/Makefile linux-2.6.10/drivers/serial/Makefile
--- ../linux-2.6.10/drivers/serial/Makefile	2004-12-24 22:34:45.000000000 +0100
+++ linux-2.6.10/drivers/serial/Makefile	2005-01-05 12:03:52.000000000 +0100
@@ -29,6 +29,7 @@
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
 obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
+obj-$(CONFIG_SERIAL_LEON) += leon.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_68360) += 68360serial.o
diff -Naur ../linux-2.6.10/drivers/serial/leon.c linux-2.6.10/drivers/serial/leon.c
--- ../linux-2.6.10/drivers/serial/leon.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.10/drivers/serial/leon.c	2005-01-05 12:12:00.000000000 +0100
@@ -0,0 +1,650 @@
+/*
+ *  linux/drivers/serial/leon.c
+ *
+ *  Driver for Leon serial ports
+ *
+ *  Based on linux/drivers/serial/amba.c , Documentation/serial/driver
+ * 
+ *  Copyright 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ * 
+ *  Modified for Leon by Konrad Eisele <eiselekd@web.de>, 2003
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/oplib.h>
+
+#if defined(CONFIG_SERIAL_LEON_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+#include <asm/leon.h>
+
+#define UART_NR		2
+
+#define SERIAL_LEON_MAJOR	TTY_MAJOR
+#define SERIAL_LEON_MINOR	64
+#define SERIAL_LEON_NR		UART_NR
+
+#define AMBA_ISR_PASS_LIMIT	256
+
+#define UART_GET_CHAR(p)	(LEON_BYPASS_LOAD_PA((port)->membase + (LEON_OFF_UDATA)))
+#define UART_PUT_CHAR(p, v)	(LEON_BYPASS_STORE_PA((port)->membase + (LEON_OFF_UDATA),v))
+#define UART_GET_STATUS(p)	(LEON_BYPASS_LOAD_PA((port)->membase + (LEON_OFF_USTAT)))
+#define UART_PUT_STATUS(p,v)	(LEON_BYPASS_STORE_PA((port)->membase + (LEON_OFF_USTAT),v))
+#define UART_GET_CTRL(port)   (LEON_BYPASS_LOAD_PA((port)->membase + (LEON_OFF_UCTRL)))
+#define UART_PUT_CTRL(port,v) (LEON_BYPASS_STORE_PA((port)->membase + (LEON_OFF_UCTRL),v))
+#define UART_GET_SCAL(port)   (LEON_BYPASS_LOAD_PA((port)->membase + (LEON_OFF_USCAL)))
+#define UART_PUT_SCAL(port,v) (LEON_BYPASS_STORE_PA((port)->membase + (LEON_OFF_USCAL),v))
+#define UART_RX_DATA(s)       (((s) & LEON_USTAT_DR) != 0)
+#define UART_TX_READY(s)	(((s) & LEON_USTAT_TH) != 0)
+
+#define UART_DUMMY_RSR_RX	0x8000 /* for ignore all read */
+
+/* We wrap our port structure around the generic uart_port */
+struct uart_leon_port {
+	struct uart_port	port;
+	unsigned int		old_status;
+};
+
+static void leonuart_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CTRL(port);
+	cr &= ~LEON_UCTRL_TI; 
+	UART_PUT_CTRL(port, cr);
+}
+
+static void leonuart_tx_chars(struct uart_port *port);
+static void leonuart_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CTRL(port);
+	cr |= LEON_UCTRL_TI; 
+	UART_PUT_CTRL(port, cr);
+	
+	if (UART_GET_STATUS(port) & LEON_USTAT_TH) {
+	  leonuart_tx_chars (port);
+	}
+}
+
+static void leonuart_stop_rx(struct uart_port *port)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CTRL(port);
+	cr &= ~(LEON_UCTRL_RI);
+	UART_PUT_CTRL(port, cr);
+}
+
+static void leonuart_enable_ms(struct uart_port *port)
+{
+	/* no modem status for leon */
+}
+
+static void
+#ifdef SUPPORT_SYSRQ
+leonuart_rx_chars(struct uart_port *port, struct pt_regs *regs)
+#else
+leonuart_rx_chars(struct uart_port *port)
+#endif
+{
+	struct tty_struct *tty = port->info->tty;
+	unsigned int status, ch, flag, rsr, max_count = 256;
+
+	status = UART_GET_STATUS(port); 
+	while (UART_RX_DATA(status) && max_count--) {
+      
+	        if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+	              if (tty->low_latency)
+			     tty_flip_buffer_push(tty);
+		      /*
+		       * If this failed then we will throw away the
+		       * bytes but must do so to clear interrupts.
+		       */
+		}
+
+		ch = UART_GET_CHAR(port); 
+		flag = TTY_NORMAL;
+
+		port->icount.rx++;
+
+		/*
+		 * Note that the error handling code is
+		 * out of the main execution path
+		 */
+		rsr = UART_GET_STATUS(port) | UART_DUMMY_RSR_RX; 
+		UART_PUT_STATUS(port,0);
+		if (rsr & LEON_USTAT_ERROR) { 
+
+		  if (rsr & LEON_USTAT_BR) {
+		    rsr &= ~(LEON_USTAT_FE | LEON_USTAT_PE);
+		    port->icount.brk++;
+		    if (uart_handle_break(port))
+		      goto ignore_char;
+		  } else if (rsr & LEON_USTAT_PE) {
+		    port->icount.parity++;
+		  } else if (rsr & LEON_USTAT_FE) {
+		    port->icount.frame++;
+		  }
+		  if (rsr & LEON_USTAT_OV)
+		    port->icount.overrun++;
+                  
+		  rsr &= port->read_status_mask;
+		  
+		  if (rsr & LEON_USTAT_BR) 
+		    flag = TTY_BREAK;
+                  else if (rsr & LEON_USTAT_PE)
+		    flag = TTY_PARITY;
+                  else if (rsr & LEON_USTAT_FE)
+		    flag = TTY_FRAME;
+		}
+            
+		if (uart_handle_sysrq_char(port, ch, regs))
+		    goto ignore_char;
+		
+		if ((rsr & port->ignore_status_mask) == 0) {
+		        tty_insert_flip_char(tty, ch, flag);
+		}
+		if ((rsr & LEON_USTAT_OV) &&
+		    tty->flip.count < TTY_FLIPBUF_SIZE) {
+			/*
+			 * Overrun is special, since it's reported
+			 * immediately, and doesn't affect the current
+			 * character
+			 */
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		}
+ignore_char:
+		status = UART_GET_STATUS(port); 
+	}
+	tty_flip_buffer_push(tty);
+	return;
+}
+
+static void leonuart_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->info->xmit;
+	int count;
+
+	if (port->x_char) {
+		UART_PUT_CHAR(port, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		leonuart_stop_tx(port, 0);
+		return;
+	}
+
+	count = port->fifosize >> 1; //amba: fill FIFO
+	do {
+		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		leonuart_stop_tx(port, 0);
+}
+
+static irqreturn_t leonuart_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct uart_port *port = dev_id;
+	unsigned int status;
+
+	spin_lock(&port ->lock);
+
+	status = UART_GET_STATUS(port);
+	if (status & LEON_USTAT_DR) {
+#ifdef SUPPORT_SYSRQ
+	  leonuart_rx_chars(port,regs);
+#else
+	  leonuart_rx_chars(port);
+#endif          
+	}
+	if (status & LEON_USTAT_TH) {
+	  leonuart_tx_chars(port);
+	}
+
+	spin_unlock(&port ->lock);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int leonuart_tx_empty(struct uart_port *port)
+{
+	return UART_GET_STATUS(port) & LEON_USTAT_TH ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int leonuart_get_mctrl(struct uart_port *port)
+{
+	unsigned int result = 0;
+
+	/*
+	  no modem status for leon
+	*/
+
+	return result;
+}
+
+static void leonuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* no modem status for leon */
+}
+
+static void leonuart_break_ctl(struct uart_port *port, int break_state)
+{
+	/* no break for leon */
+}
+
+static int leonuart_startup(struct uart_port *port)
+{
+	struct uart_leon_port *uap = (struct uart_leon_port *)port;
+	int retval;
+	unsigned int cr;
+
+	/*
+	 * Allocate the IRQ
+	 */
+	retval = request_irq(port->irq, leonuart_int, 0, "leon", port);
+	if (retval)
+		return retval;
+
+	/*
+	 * initialise the old status of the modem signals
+	 */
+	uap->old_status = 0;
+
+	/*
+	 * Finally, enable interrupts
+	 */
+	cr = UART_GET_CTRL(port);
+	UART_PUT_CTRL(port, cr | LEON_UCTRL_RE | LEON_UCTRL_TE	| LEON_UCTRL_RI | LEON_UCTRL_TI );	
+      
+	return 0;
+}
+
+static void leonuart_shutdown(struct uart_port *port)
+{
+	unsigned int cr;
+
+	/*
+	 * Free the interrupt
+	 */
+	free_irq(port->irq, port);
+
+	/*
+	 * disable all interrupts, disable the port
+	 */
+	cr = UART_GET_CTRL(port);
+	UART_PUT_CTRL(port, cr & ~( LEON_UCTRL_RE | LEON_UCTRL_TE | LEON_UCTRL_RI | LEON_UCTRL_TI ));	
+      
+}
+
+static void
+leonuart_set_termios(struct uart_port *port, struct termios *termios,
+		     struct termios *old)
+{
+	unsigned int cr;
+	unsigned long flags;
+	unsigned int baud, quot;
+
+	/*
+	 * Ask the core to calculate the divisor for us.
+	 */
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
+	if (baud == 0) {
+	  panic("invalid baudrate %i\n", port->uartclk/16);
+	}
+	quot = (uart_get_divisor(port, baud)) * 2; //uart_get_divisor calc a *16 uart freq, leon is *8
+	cr = UART_GET_CTRL(port);
+	cr &= ~( LEON_UCTRL_PE | LEON_UCTRL_PS );
+	  
+	if (termios->c_cflag & PARENB) { 
+		cr |= LEON_UCTRL_PE; 
+		if ((termios->c_cflag & PARODD))
+			cr |= LEON_UCTRL_PS;
+	}
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/*
+	 * Update the per-port timeout.
+	 */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	port->read_status_mask = LEON_USTAT_OV;
+	if (termios->c_iflag & INPCK) 
+		port->read_status_mask |= LEON_USTAT_FE | LEON_USTAT_PE ;
+
+	/*
+	 * Characters to ignore
+	 */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= LEON_USTAT_FE | LEON_USTAT_PE;
+
+	/*
+	 * Ignore all characters if CREAD is not set.
+	 */
+	if ((termios->c_cflag & CREAD) == 0)
+		port->ignore_status_mask |= LEON_USTAT_OV | LEON_USTAT_FE | LEON_USTAT_PE;
+
+	/* Set baud rate */
+	quot -= 1;
+	UART_PUT_SCAL(port, quot);
+	UART_PUT_CTRL(port, cr);
+      
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *leonuart_type(struct uart_port *port)
+{
+	return port->type == PORT_LEON ? "Leon" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'
+ */
+static void leonuart_release_port(struct uart_port *port)
+{
+}
+
+/*
+ * Request the memory region(s) being used by 'port'
+ */
+static int leonuart_request_port(struct uart_port *port)
+{
+	return 0;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void leonuart_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_LEON;
+		leonuart_request_port(port);
+	}
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int leonuart_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	int ret = 0;
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_LEON)
+		ret = -EINVAL;
+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
+		ret = -EINVAL;
+	if (ser->baud_base < 9600)
+		ret = -EINVAL;
+	return ret;
+}
+
+static struct uart_ops leon_pops = {
+	.tx_empty	= leonuart_tx_empty,
+	.set_mctrl	= leonuart_set_mctrl,
+	.get_mctrl	= leonuart_get_mctrl,
+	.stop_tx	= leonuart_stop_tx,
+	.start_tx	= leonuart_start_tx,
+	.stop_rx	= leonuart_stop_rx,
+	.enable_ms	= leonuart_enable_ms,
+	.break_ctl	= leonuart_break_ctl,
+	.startup	= leonuart_startup,
+	.shutdown	= leonuart_shutdown,
+	.set_termios	= leonuart_set_termios,
+	.type		= leonuart_type,
+	.release_port	= leonuart_release_port,
+	.request_port	= leonuart_request_port,
+	.config_port	= leonuart_config_port,
+	.verify_port	= leonuart_verify_port,
+};
+
+static struct uart_leon_port leon_ports[UART_NR] = {
+	{
+		.port	= {
+			.membase	= (void*) (LEON_PREGS+LEON_UART0),
+			.mapbase	= (LEON_PREGS+LEON_UART0),
+			.iotype	= SERIAL_IO_MEM,
+			.irq		= LEON_INTERRUPT_UART_0_RX_TX,
+			.uartclk	= 0,
+			.fifosize	= 1,
+			.ops		= &leon_pops,
+			.flags	= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+	},
+	{
+		.port	= {
+			.membase	= (void*) (LEON_PREGS+LEON_UART1),
+			.mapbase	= (LEON_PREGS+LEON_UART1),
+			.iotype	= SERIAL_IO_MEM,
+			.irq		= LEON_INTERRUPT_UART_1_RX_TX, 
+			.uartclk	= 0,
+			.fifosize	= 1,
+			.ops		= &leon_pops,
+			.flags	= ASYNC_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+	}
+};
+
+#ifdef CONFIG_SERIAL_LEON_CONSOLE
+
+static void
+leonuart_console_write(struct console *co, const char *s, unsigned int count)
+{
+	struct uart_port *port = &leon_ports[co->index].port;
+	unsigned int status, old_cr;
+	int i;
+
+	/*
+	 *	First save the CR then disable the interrupts
+	 */
+	old_cr = UART_GET_CTRL(port);
+	UART_PUT_CTRL(port, (old_cr & ~(LEON_UCTRL_RI | LEON_UCTRL_TI)) | (LEON_UCTRL_RE | LEON_UCTRL_TE) ); 
+
+	/*
+	 *	Now, do each character
+	 */
+	for (i = 0; i < count; i++) {
+		do {
+			status = UART_GET_STATUS(port);
+		} while (!UART_TX_READY(status));
+		UART_PUT_CHAR(port, s[i]);
+		if (s[i] == '\n') {
+			do {
+				status = UART_GET_STATUS(port);
+			} while (!UART_TX_READY(status));
+			UART_PUT_CHAR(port, '\r');
+		}
+	}
+
+	/*
+	 *	Finally, wait for transmitter to become empty
+	 *	and restore the TCR
+	 */
+	do {
+		status = UART_GET_STATUS(port);
+	} while (!UART_TX_READY(status));
+	UART_PUT_CTRL(port, old_cr);
+}
+
+static void __init
+leonuart_console_get_options(struct uart_port *port, int *baud,
+			     int *parity, int *bits)
+{
+      if (UART_GET_CTRL(port) & (LEON_UCTRL_RE | LEON_UCTRL_TE)) {
+	
+		unsigned int quot, status;
+		status = UART_GET_STATUS(port);
+
+		*parity = 'n';
+		if (status & LEON_UCTRL_PE) {
+			if ((status & LEON_UCTRL_PS) == 0 )
+				*parity = 'e';
+			else
+				*parity = 'o';
+		}
+            
+		*bits = 8;
+            quot = UART_GET_SCAL(port) / 8;
+		*baud = port->uartclk / (16 * (quot + 1));
+	}
+}
+
+static int __init leonuart_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 38400;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	/*
+	 * Check whether an invalid uart number has been specified, and
+	 * if so, search for the first available port that does have
+	 * console support.
+	 */
+	if (co->index >= UART_NR)
+		co->index = 0;
+	port = &leon_ports[co->index].port;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	else
+		leonuart_console_get_options(port, &baud, &parity, &bits);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static void __init leonuart_early_setup(void) {
+	
+	static int first = 1;
+	int i;
+
+	if (!first)
+		return;
+	first = 0;
+
+	for (i = 0; i < UART_NR; i++) {
+		/* assuming that bootloader or the dsumon has set up LEON_SRLD,
+		 * so that timer ticks on 1mhz
+		 */
+		leon_ports[i].port.uartclk = 
+		  (LEON_REGLOAD_PA(LEON_SRLD)+1) * 1000 * 1000;
+	}
+}
+
+static struct uart_driver leon_reg;
+static struct console leon_console = {
+	.name		= "ttyS",
+	.write		= leonuart_console_write,
+	.device		= uart_console_device,
+	.setup		= leonuart_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &leon_reg,
+};
+
+static int leonuart_init(void);
+static int __init leonuart_console_init(void)
+{
+	leonuart_early_setup();
+	register_console(&leon_console);
+	return 0;
+}
+console_initcall(leonuart_console_init);
+
+#define LEON_CONSOLE	&leon_console
+#else
+#define LEON_CONSOLE	NULL
+#endif
+
+static struct uart_driver leon_reg = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "serial",
+	.devfs_name	= "tts/",
+	.dev_name	= "ttyS",
+	.major		= SERIAL_LEON_MAJOR,
+	.minor		= SERIAL_LEON_MINOR,
+	.nr		= UART_NR,
+	.cons		= LEON_CONSOLE,
+};
+
+
+static int __init leonuart_init(void)
+{
+	int ret;
+	int i;
+	int node;
+	int freq_khz;
+	int baud_rates[UART_NR];
+
+	printk(KERN_INFO "Serial: Leon driver, author: Konrad Eisele<eiselekd@web.de>\n");
+
+	node = prom_getchild(prom_root_node);
+	freq_khz = prom_getint(node, "frequency");
+	baud_rates[0] = prom_getintdefault(node, "uart1_baud", 9600);
+	baud_rates[1] = prom_getintdefault(node, "uart2_baud", 9600);
+
+	printk(KERN_INFO "Serial: system frequency: %i khz, baud rates: %i %i\n", freq_khz, baud_rates[0], baud_rates[1]);
+
+	ret = uart_register_driver(&leon_reg);
+	leon_reg.tty_driver->init_termios.c_cflag = 
+		(leon_reg.tty_driver->init_termios.c_cflag & ~CBAUD) | B38400;
+	
+	if (ret) return ret;
+
+	for (i = 0; i < UART_NR; i++) {
+		struct console co;
+		leon_ports[i].port.uartclk = freq_khz * 1000;
+		uart_add_one_port(&leon_reg, &leon_ports[i].port);
+		uart_set_options(&leon_ports[i].port, &co,
+				 baud_rates[i], 'n', 8, 'n');
+	}
+
+	return ret;
+}
+
+static void __exit leonuart_exit(void)
+{
+	int i;
+
+	for (i = 0; i < UART_NR; i++)
+		uart_remove_one_port(&leon_reg, &leon_ports[i].port);
+
+	uart_unregister_driver(&leon_reg);
+}
+
+module_init(leonuart_init);
+module_exit(leonuart_exit);
+
+MODULE_AUTHOR("Konrad Eisele<eiselekd@web.de>, based on AMBA serial");
+MODULE_DESCRIPTION("Leon2 serial port driver");
+MODULE_LICENSE("GPL");
+