From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262659AbVAKCZr (ORCPT ); Mon, 10 Jan 2005 21:25:47 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262719AbVAKCYt (ORCPT ); Mon, 10 Jan 2005 21:24:49 -0500 Received: from ms-smtp-02-qfe0.socal.rr.com ([66.75.162.134]:48021 "EHLO ms-smtp-02-eri0.socal.rr.com") by vger.kernel.org with ESMTP id S262583AbVAKCUL (ORCPT ); Mon, 10 Jan 2005 21:20:11 -0500 Message-ID: <41E337DA.7080107@clones.net> Date: Mon, 10 Jan 2005 18:20:10 -0800 From: Glendon Gross User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.2) Gecko/20040803 X-Accept-Language: en-us, en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: UDF Support interfering with IDE boot? Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello there, I've been struggling for the last few hours or so with a new build of 2.6.10 on a machine where 2.6.9 boots fine (I have both in a lilo config menu.) When I boot 2.6.10, I get the following error: UDF-fs: No partition found (1) Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown block(3,1) I am curious, is there a quick fix for this? Under 2.6.9 I have a successful boot. (see below for 2.6.9 dmesg output) Linux version 2.6.9-clonix_sound (root@optiplex) (gcc version 3.3.4) #20 SMP Thu Dec 16 07:33:39 PST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000c000000 (usable) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) 192MB LOWMEM available. On node 0 totalpages: 49152 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 45056 pages, LIFO batch:11 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: Unable to locate RSDP Built 1 zonelists Kernel command line: BOOT_IMAGE=Linux-2.6.9 ro root=301 No local APIC present or hardware disabled Initializing CPU#0 CPU 0 irqstacks, hard=c04f4000 soft=c04ec000 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 364.283 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 189844k/196608k available (2520k kernel code, 6332k reserved, 1267k data, 204k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 716.80 BogoMIPS (lpj=358400) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel Pentium III (Coppermine) stepping 03 per-CPU timeslice cutoff: 730.46 usecs. task migration cache decay timeout: 1 msecs. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfcf4e, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay i8k: unsupported model: OptiPlex GXa 366Mbr EM+ i8k: vendor=Dell Computer Corporation, model=OptiPlex GXa 366Mbr EM+, version=A10 i8k: unable to get SMM Dell signature i8k: unable to get SMM BIOS version SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0 pnp: the driver 'system' has been registered Machine check exception polling timer started. audit: initializing netlink socket (disabled) audit(1105380620.805:0): initialized Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Initializing Cryptographic API Limiting direct PCI/PCI transfers. atyfb: 3D RAGE PRO (BGA, AGP, 1x only) [0x4744 rev 0x7c] 2M SGRAM, 14.31818 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK Console: switching to colour frame buffer device 80x25 fb0: ATY Mach64 frame buffer device on PCI vesafb: abort, cannot reserve video memory at 0xfd000000 vesafb: framebuffer at 0xfd000000, mapped to 0xcd100000, size 1536k vesafb: mode is 1024x768x8, linelength=1024, pages=1 vesafb: protected mode interface info at c000:4a9c vesafb: scrolling: redraw vesafb: Pseudocolor: size=6:6:6:6, shift=0:0:0:0 fb1: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 440LX Chipset. agpgart: Maximum main memory to use for agp memory: 150M agpgart: AGP aperture is 64M @ 0xf0000000 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled pnp: the driver 'serial' has been registered Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 91366U4, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: DVD-RW IDE1008, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 pnp: the driver 'ide' has been registered Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 26588016 sectors (13613 MB) w/2048KiB Cache, CHS=26377/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 PCI: Found IRQ 10 for device 0000:02:09.0 PCI: Sharing IRQ 10 with 0000:02:0b.0 ahc_pci:2:9:0: hardware scb 64 bytes; kernel scb 52 bytes; ahc_dma 8 bytes ahc_pci:2:9:0: Host Adapter Bios disabled. Using default SCSI device parameters scsi0: Waking DV thread scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs Launching DV Thread scsi0: Beginning Domain Validation scsi0:A:0:0: Performing DV scsi0:2431: Going from state 0 to state 1 scsi0:A:0:0: Sending INQ (scsi0:A:0:0): Saw Selection Timeout for SCB 0x3 scsi0:0:0: Command completed, status= 0x80000 scsi0:A:0:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2625: Going from state 1 to state 0 scsi0:A:0:0: Failed DV inquiry, skipping scsi0:A:1:0: Performing DV scsi0:2431: Going from state 0 to state 1 scsi0:A:1:0: Sending INQ (scsi0:A:1:0): Saw Selection Timeout for SCB 0x2 scsi0:0:1: Command completed, status= 0x80000 scsi0:A:1:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2625: Going from state 1 to state 0 scsi0:A:1:0: Failed DV inquiry, skipping scsi0:A:2:0: Performing DV scsi0:2431: Going from state 0 to state 1 scsi0:A:2:0: Sending INQ (scsi0:A:2:0): Saw Selection Timeout for SCB 0x3 scsi0:0:2: Command completed, status= 0x80000 scsi0:A:2:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2625: Going from state 1 to state 0 scsi0:A:2:0: Failed DV inquiry, skipping scsi0:A:3:0: Performing DV scsi0:2431: Going from state 0 to state 1 scsi0:A:3:0: Sending INQ scsi0:0:3: Command completed, status= 0x10000 scsi0:A:3:0: Entering ahc_linux_dv_transition, state= 1, status= 0x0, cmd->result= 0x10000 scsi0:2606: Going from state 1 to state 2 scsi0:A:3:0: Sending INQ scsi0:0:3: Command completed, status= 0x10000 scsi0:A:3:0: Entering ahc_linux_dv_transition, state= 2, status= 0x0, cmd->result= 0x10000 scsi0:2606: Going from state 2 to state 3 scsi0:A:3:0: Sending INQ scsi0:0:3: Command completed, status= 0x10000 scsi0:A:3:0: Entering ahc_linux_dv_transition, state= 3, status= 0x0, cmd->result= 0x10000 scsi0:2653: Going from state 3 to state 4 scsi0:A:3:0: Sending TUR (scsi0:A:3:0): SCB 3: requests Check Status (scsi0:A:3:0): Sending Sense Copied 32 bytes of sense data: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0x18 0x0 0x0 0x0 0x0 0x29 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi0:0:3: Command completed, status= 0x80a0002 scsi0:A:3:0: Entering ahc_linux_dv_transition, state= 4, status= 0x10905, cmd->result= 0x80a0002 scsi0:2799: Going from state 4 to state 4 scsi0:A:3:0: Sending TUR scsi0:0:3: Command completed, status= 0x10000 scsi0:A:3:0: Entering ahc_linux_dv_transition, state= 4, status= 0x0, cmd->result= 0x10000 scsi0:2790: Going from state 4 to state 0 scsi0:A:4:0: Performing DV scsi0:2431: Going from state 0 to state 1 scsi0:A:4:0: Sending INQ (scsi0:A:4:0): Saw Selection Timeout for SCB 0x3 scsi0:0:4: Command completed, status= 0x80000 scsi0:A:4:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2625: Going from state 1 to state 0 scsi0:A:4:0: Failed DV inquiry, skipping scsi0:A:5:0: Performing DV scsi0:2431: Going from state 0 to state 1 scsi0:A:5:0: Sending INQ (scsi0:A:5:0): Saw Selection Timeout for SCB 0x2 scsi0:0:5: Command completed, status= 0x80000 scsi0:A:5:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2625: Going from state 1 to state 0 scsi0:A:5:0: Failed DV inquiry, skipping scsi0:A:6:0: Performing DV scsi0:2431: Going from state 0 to state 1 scsi0:A:6:0: Sending INQ (scsi0:A:6:0): Saw Selection Timeout for SCB 0x3 scsi0:0:6: Command completed, status= 0x80000 scsi0:A:6:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2625: Going from state 1 to state 0 scsi0:A:6:0: Failed DV inquiry, skipping (scsi0:A:0:0): Saw Selection Timeout for SCB 0x2 (scsi0:A:1:0): Saw Selection Timeout for SCB 0x3 (scsi0:A:2:0): Saw Selection Timeout for SCB 0x2 scsi0:A:3:0: INITIATOR_MSG_OUT byte 0xc0 scsi0:A:3:0: INITIATOR_MSG_OUT byte 0x1 scsi0:A:3:0: INITIATOR_MSG_OUT byte 0x3 scsi0:A:3:0: INITIATOR_MSG_OUT byte 0x1 scsi0:A:3:0: INITIATOR_MSG_OUT byte 0x19 scsi0:A:3:0: INITIATOR_MSG_OUT byte 0xf scsi0:A:3:0: INITIATOR_MSG_OUT PHASEMIS in Message-in phase scsi0:A:3:0: INITIATOR_MSG_IN byte 0x1 scsi0:A:3:0: INITIATOR_MSG_IN byte 0x3 scsi0:A:3:0: INITIATOR_MSG_IN byte 0x1 scsi0:A:3:0: INITIATOR_MSG_IN byte 0x19 scsi0:A:3:0: INITIATOR_MSG_IN byte 0xf (scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15) scsi0:A:3:0: INITIATOR_MSG_IN PHASEMIS in Command phase Vendor: IBM Model: DDRS-34560 Rev: S97B Type: Direct-Access ANSI SCSI revision: 02 scsi0:A:3:0: Tagged Queuing enabled. Depth 32 (scsi0:A:4:0): Saw Selection Timeout for SCB 0x3 (scsi0:A:5:0): Saw Selection Timeout for SCB 0x2 (scsi0:A:6:0): Saw Selection Timeout for SCB 0x3 SCSI device sda: 8925000 512-byte hdwr sectors (4570 MB) (scsi0:A:3:0): Handled Residual of 6 bytes SCSI device sda: drive cache: write back sda: sda1 Attached scsi disk sda at scsi0, channel 0, id 3, lun 0 ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 USB Universal Host Controller Interface driver v2.2 PCI: Found IRQ 11 for device 0000:00:07.2 PCI: Sharing IRQ 11 with 0000:00:11.0 uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB uhci_hcd 0000:00:07.2: irq 11, io base 0000cce0 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: detected 2 ports usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: default language 0x0409 usb usb1: Product: Intel Corp. 82371AB/EB/MB PIIX4 USB usb usb1: Manufacturer: Linux 2.6.9-clonix_sound uhci_hcd usb usb1: SerialNumber: 0000:00:07.2 usb usb1: hotplug usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 2ms hub 1-0:1.0: local power source is good usbcore: registered new driver audio drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver usbcore: registered new driver midi usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 input: PC Speaker NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) ip_conntrack version 2.1 (1536 buckets, 12288 max) - 304 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 ReiserFS: hda1: found reiserfs format "3.6" with standard journal ReiserFS: hda1: using ordered data mode ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda1: checking transaction log (hda1) ReiserFS: hda1: journal-1153: found in header: first_unflushed_offset 7358, last_flushed_trans_id 219224 ReiserFS: hda1: journal-1206: Starting replay from offset 941564205472958, trans_id 0 ReiserFS: hda1: journal-1299: Setting newest_mount_id to 111 ReiserFS: hda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 204k freed uhci_hcd 0000:00:07.2: suspend_hc Adding 441776k swap on /dev/hda2. Priority:-1 extents:1 Linux Kernel Card Services options: [pci] [cardbus] Intel ISA PCIC probe: not found. Device 'i823650' does not have a release() function, it is broken and must be fixed. Badness in device_release at drivers/base/core.c:85 [] dump_stack+0x16/0x18 [] kobject_cleanup+0x45/0x74 [] kref_put+0x60/0x6b [] kobject_put+0x18/0x1c [] init_i82365+0x71/0x186 [i82365] [] sys_init_module+0xfc/0x21d [] syscall_call+0x7/0xb Databook TCIC-2 PCMCIA probe: not found. PCI: Found IRQ 10 for device 0000:02:0b.0 PCI: Sharing IRQ 10 with 0000:02:09.0 PCI: Found IRQ 11 for device 0000:00:11.0 PCI: Sharing IRQ 11 with 0000:00:07.2 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:11.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xcc80. Vers LK1.1.19 ***INVALID CHECKSUM 003e*** eth0: Dropping NETIF_F_SG since no checksum feature. ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 nfs warning: mount version older than kernel process `named' is using obsolete setsockopt SO_BSDCOMPAT