Rui Nuno Capela wrote: > OK. Here goes my fresh and newly jack_test4.1 test suite. It might be > still rough, as usual ;) Thanks Here's fresh results on more stressed hardware (on ext3) with 2.6.11-rc1-mm2 (which by the way has SCHED_ISO v2 included). The load hovering at 50% spikes at times close to 70 which tests the behaviour under iso throttling. ==> jack_test4-2.6.11-rc1-mm2-fifo.log <== Number of runs . . . . . . . :( 1) ********************************************* Timeout Count . . . . . . . . :( 0) XRUN Count . . . . . . . . . : 41 Delay Count (>spare time) . . : 0 Delay Count (>1000 usecs) . . : 0 Delay Maximum . . . . . . . . : 0 usecs Cycle Maximum . . . . . . . . : 10968 usecs Average DSP Load. . . . . . . : 44.3 % Average CPU System Load . . . : 4.9 % Average CPU User Load . . . . : 17.1 % Average CPU Nice Load . . . . : 0.0 % Average CPU I/O Wait Load . . : 0.0 % Average CPU IRQ Load . . . . : 0.0 % Average CPU Soft-IRQ Load . . : 0.0 % Average Interrupt Rate . . . : 1689.9 /sec Average Context-Switch Rate . : 19052.6 /sec ********************************************* Delta Maximum . . . . . . . . : 0.00000 ********************************************* ==> jack_test4-2.6.11-rc1-mm2-iso.log <== Number of runs . . . . . . . :( 1) ********************************************* Timeout Count . . . . . . . . :( 0) XRUN Count . . . . . . . . . : 2 Delay Count (>spare time) . . : 0 Delay Count (>1000 usecs) . . : 0 Delay Maximum . . . . . . . . : 0 usecs Cycle Maximum . . . . . . . . : 1282 usecs Average DSP Load. . . . . . . : 50.5 % Average CPU System Load . . . : 11.2 % Average CPU User Load . . . . : 17.6 % Average CPU Nice Load . . . . : 0.0 % Average CPU I/O Wait Load . . : 0.0 % Average CPU IRQ Load . . . . : 0.0 % Average CPU Soft-IRQ Load . . : 0.0 % Average Interrupt Rate . . . : 1688.8 /sec Average Context-Switch Rate . : 18985.1 /sec ********************************************* Delta Maximum . . . . . . . . : 0.00000 ********************************************* ==> jack_test4-2.6.11-rc1-mm2-normal.log <== Number of runs . . . . . . . :( 1) ********************************************* Timeout Count . . . . . . . . :( 0) XRUN Count . . . . . . . . . : 325 Delay Count (>spare time) . . : 0 Delay Count (>1000 usecs) . . : 0 Delay Maximum . . . . . . . . : 0 usecs Cycle Maximum . . . . . . . . : 4726 usecs Average DSP Load. . . . . . . : 50.0 % Average CPU System Load . . . : 5.1 % Average CPU User Load . . . . : 18.7 % Average CPU Nice Load . . . . : 0.0 % Average CPU I/O Wait Load . . : 0.0 % Average CPU IRQ Load . . . . : 0.1 % Average CPU Soft-IRQ Load . . : 0.0 % Average Interrupt Rate . . . : 1704.5 /sec Average Context-Switch Rate . : 18875.2 /sec ********************************************* Delta Maximum . . . . . . . . : 0.00000 ********************************************* Full data and pretty pictures: http://ck.kolivas.org/patches/SCHED_ISO/iso2-benchmarks/ Cheers, Con