From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-11.5 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI,NICE_REPLY_A, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_SANE_1 autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id A3E00C55179 for ; Thu, 29 Oct 2020 10:40:06 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 2FD6B20791 for ; Thu, 29 Oct 2020 10:40:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1725937AbgJ2KkE (ORCPT ); Thu, 29 Oct 2020 06:40:04 -0400 Received: from imap3.hz.codethink.co.uk ([176.9.8.87]:60784 "EHLO imap3.hz.codethink.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725839AbgJ2KkE (ORCPT ); Thu, 29 Oct 2020 06:40:04 -0400 X-Greylist: delayed 943 seconds by postgrey-1.27 at vger.kernel.org; Thu, 29 Oct 2020 06:40:01 EDT Received: from [167.98.27.226] (helo=[172.16.101.102]) by imap3.hz.codethink.co.uk with esmtpsa (Exim 4.92 #3 (Debian)) id 1kY56D-0007SZ-8N; Thu, 29 Oct 2020 10:24:05 +0000 Subject: Re: [RFC PATCH 2/3] RISC-V: Initial DTS for Microchip ICICLE board To: Atish Patra , linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org, Albert Ou , Cyril.Jean@microchip.com, Daire McNamara , Anup Patel , Rob Herring , Alistair Francis , Paul Walmsley , Palmer Dabbelt , linux-riscv@lists.infradead.org, padmarao.begari@microchip.com References: <20201028232759.1928479-1-atish.patra@wdc.com> <20201028232759.1928479-3-atish.patra@wdc.com> From: Ben Dooks Organization: Codethink Limited. Message-ID: <41f1248b-78c6-bac1-410b-9e222368c5f6@codethink.co.uk> Date: Thu, 29 Oct 2020 10:24:03 +0000 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.12.0 MIME-Version: 1.0 In-Reply-To: <20201028232759.1928479-3-atish.patra@wdc.com> Content-Type: text/plain; charset=utf-8; format=flowed Content-Language: en-GB Content-Transfer-Encoding: 7bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 28/10/2020 23:27, Atish Patra wrote: > Add initial DTS for Microchip ICICLE board having only > essential devcies (clocks, sdhci, ethernet, serial, etc). > > Signed-off-by: Atish Patra > --- > arch/riscv/boot/dts/Makefile | 1 + > arch/riscv/boot/dts/microchip/Makefile | 2 + > .../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++ > 3 files changed, 316 insertions(+) > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > create mode 100644 arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > > diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile > index ca1f8cbd78c0..3ea94ea0a18a 100644 > --- a/arch/riscv/boot/dts/Makefile > +++ b/arch/riscv/boot/dts/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > subdir-y += sifive > subdir-y += kendryte > +subdir-y += microchip > > obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y)) > diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile > new file mode 100644 > index 000000000000..55ad77521304 > --- /dev/null > +++ b/arch/riscv/boot/dts/microchip/Makefile > @@ -0,0 +1,2 @@ > +# SPDX-License-Identifier: GPL-2.0 > +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-icicle-kit-a000.dtb > diff --git a/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > new file mode 100644 > index 000000000000..5848920af55c > --- /dev/null > +++ b/arch/riscv/boot/dts/microchip/microchip-icicle-kit-a000.dts > @@ -0,0 +1,313 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* Copyright (c) 2020 Microchip Technology Inc */ > + > +/dts-v1/; > + > +/* Clock frequency (in Hz) of the rtcclk */ > +#define RTCCLK_FREQ 1000000 > + > +/ { > + #address-cells = <2>; > + #size-cells = <2>; > + model = "Microchip PolarFire-SoC"; > + compatible = "microchip,polarfire-soc"; > + > + chosen { > + stdout-path = &serial0; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + timebase-frequency = ; > + > + cpu@0 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <128>; > + i-cache-size = <16384>; > + reg = <0>; > + riscv,isa = "rv64imac"; > + status = "disabled"; > + > + cpu0_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@1 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <1>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu1_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@2 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <2>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu2_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@3 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <3>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + > + cpu3_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + > + cpu@4 { > + clock-frequency = <0>; > + compatible = "sifive,rocket0", "riscv"; > + d-cache-block-size = <64>; > + d-cache-sets = <64>; > + d-cache-size = <32768>; > + d-tlb-sets = <1>; > + d-tlb-size = <32>; > + device_type = "cpu"; > + i-cache-block-size = <64>; > + i-cache-sets = <64>; > + i-cache-size = <32768>; > + i-tlb-sets = <1>; > + i-tlb-size = <32>; > + mmu-type = "riscv,sv39"; > + reg = <4>; > + riscv,isa = "rv64imafdc"; > + tlb-split; > + status = "okay"; > + cpu4_intc: interrupt-controller { > + #interrupt-cells = <1>; > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + }; > + }; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x0 0x80000000 0x0 0x40000000>; > + clocks = <&clkcfg 26>; > + }; U-boot doesn't seem to be updating this properly. The board should have 2GiB, confirmed by looking at the device's chip markings. We only see 1GiB memory. The 0x80000000 bus window is only capable of dealing with 1GiB memory. The higher 64-bit one can have 16GiB mapped. Do we need a second node for the second GiB of memory? > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + compatible = "simple-bus"; > + ranges; > + > + cache-controller@2010000 { > + compatible = "sifive,fu540-c000-ccache", "cache"; > + cache-block-size = <64>; > + cache-level = <2>; > + cache-sets = <1024>; > + cache-size = <2097152>; > + cache-unified; > + interrupt-parent = <&plic>; > + interrupts = <1 2 3>; > + reg = <0x0 0x2010000 0x0 0x1000>; > + }; > + > + clint@2000000 { > + compatible = "riscv,clint0"; > + reg = <0x0 0x2000000 0x0 0xC000>; > + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 > + &cpu1_intc 3 &cpu1_intc 7 > + &cpu2_intc 3 &cpu2_intc 7 > + &cpu3_intc 3 &cpu3_intc 7 > + &cpu4_intc 3 &cpu4_intc 7>; > + }; > + > + plic: interrupt-controller@c000000 { > + #interrupt-cells = <1>; > + compatible = "sifive,plic-1.0.0"; > + reg = <0x0 0xc000000 0x0 0x4000000>; > + riscv,ndev = <53>; > + interrupt-controller; > + interrupts-extended = <&cpu0_intc 11 > + &cpu1_intc 11 &cpu1_intc 9 > + &cpu2_intc 11 &cpu2_intc 9 > + &cpu3_intc 11 &cpu3_intc 9 > + &cpu4_intc 11 &cpu4_intc 9>; > + }; > + > + dma@3000000 { > + compatible = "sifive,fu540-c000-pdma"; > + reg = <0x0 0x3000000 0x0 0x8000>; > + interrupt-parent = <&plic>; > + interrupts = <23 24 25 26 27 28 29 30>; > + #dma-cells = <1>; > + }; > + > + refclk: refclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <600000000>; > + clock-output-names = "msspllclk"; > + }; > + > + clkcfg: clkcfg@20002000 { > + compatible = "microchip,pfsoc-clkcfg"; > + reg = <0x0 0x20002000 0x0 0x1000>; > + reg-names = "mss_sysreg"; > + clocks = <&refclk>; > + #clock-cells = <1>; > + clock-output-names = "cpuclk", "axiclk", "ahbclk", "ENVMclk", "MAC0clk", "MAC1clk", "MMCclk", "TIMERclk", "MMUART0clk", "MMUART1clk", "MMUART2clk", "MMUART3clk", "MMUART4clk", "SPI0clk", "SPI1clk", "I2C0clk", "I2C1clk", "CAN0clk", "CAN1clk", "USBclk", "RESERVED", "RTCclk", "QSPIclk", "GPIO0clk", "GPIO1clk", "GPIO2clk", "DDRCclk", "FIC0clk", "FIC1clk", "FIC2clk", "FIC3clk", "ATHENAclk", "CFMclk"; Any chance of making this list multi-line, it is difficult to read as-is. > + }; > + > + serial0: serial@20000000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20000000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <90>; > + current-speed = <115200>; > + clocks = <&clkcfg 8>; > + status = "okay"; > + }; > + > + serial1: serial@20100000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20100000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <91>; > + current-speed = <115200>; > + clocks = <&clkcfg 9>; > + status = "okay"; > + }; > + > + serial2: serial@20102000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20102000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <92>; > + current-speed = <115200>; > + clocks = <&clkcfg 10>; > + status = "okay"; > + }; > + > + serial3: serial@20104000 { > + compatible = "ns16550a"; > + reg = <0x0 0x20104000 0x0 0x400>; > + reg-io-width = <4>; > + reg-shift = <2>; > + interrupt-parent = <&plic>; > + interrupts = <93>; > + current-speed = <115200>; > + clocks = <&clkcfg 11>; > + status = "okay"; > + }; > + > + sdcard: sdhc@20008000 { > + compatible = "cdns,sd4hc"; > + reg = <0x0 0x20008000 0x0 0x1000>; > + interrupt-parent = <&plic>; > + interrupts = <88>; > + pinctrl-names = "default"; > + clocks = <&clkcfg 6>; > + bus-width = <4>; > + disable-wp; > + no-1-8-v; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + card-detect-delay = <200>; > + sd-uhs-sdr12; > + sd-uhs-sdr25; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + max-frequency = <200000000>; > + status = "okay"; > + }; Given eMMC is the default device, shouldn't that be default for the device tree too? Even if not, having the emmc node here would be a good thing as it is different to the SD node. > + > + emac1: ethernet@20112000 { > + compatible = "cdns,macb"; > + reg = <0x0 0x20112000 0x0 0x2000>; > + interrupt-parent = <&plic>; > + interrupts = <70 71 72 73>; > + mac-address = [56 34 12 00 FC 00]; > + phy-mode = "sgmii"; > + clocks = <&clkcfg 5>, <&clkcfg 2>; > + clock-names = "pclk", "hclk"; > + #address-cells = <1>; > + #size-cells = <0>; > + phy1: ethernet-phy@9 { > + reg = <9>; > + ti,fifo-depth = <0x01>; > + }; > + }; Aren't there two ethernet ports on the board? Also, at the moment u-boot is not filling the MAC address parameter in so we've got at two boards on the network with the same MAC until we override it in the device tree for the second. > + > + uio_axi_lsram@2030000000 { > + compatible = "generic-uio"; > + reg = <0x20 0x30000000 0 0x80000000 >; > + status = "okay"; > + }; > + }; > +}; > -- Ben Dooks http://www.codethink.co.uk/ Senior Engineer Codethink - Providing Genius https://www.codethink.co.uk/privacy.html