LKML Archive on lore.kernel.org
 help / color / Atom feed
From: "Guido Günther" <agx@sigxcpu.org>
To: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	linux-power@fi.rohmeurope.com, linux-kernel@vger.kernel.org
Subject: [PATCH v2] regulators: bd718x7: Add enable times
Date: Fri, 18 Dec 2020 19:38:07 +0100
Message-ID: <41fb2ed19f584f138336344e2297ae7301f72b75.1608316658.git.agx@sigxcpu.org> (raw)

Use the typical startup times from the data sheet so boards get a
reasonable default. Not setting any enable time can lead to board hangs
when e.g. clocks are enabled too soon afterwards.

This fixes gpu power domain resume on the Librem 5.

Signed-off-by: Guido Günther <agx@sigxcpu.org>

---
v2
- As per review comment by Matti Vaittinen
  https://lore.kernel.org/lkml/beba25e85db20649aa040fc0ae549895c9265f6f.camel@fi.rohmeurope.com/
  Use defines instead of plain values
- As per review comment by Mark Brown
  https://lore.kernel.org/lkml/20201216130637.GC4861@sirena.org.uk/
  Drop cover letter
---
 drivers/regulator/bd718x7-regulator.c | 27 ++++++++++++++++++++++++
 include/linux/mfd/rohm-bd718x7.h      | 30 +++++++++++++++++++++++++++
 2 files changed, 57 insertions(+)

diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c
index e6d5d98c3cea..f7597832d2c5 100644
--- a/drivers/regulator/bd718x7-regulator.c
+++ b/drivers/regulator/bd718x7-regulator.c
@@ -613,6 +613,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
 			.vsel_mask = DVS_BUCK_RUN_MASK,
 			.enable_reg = BD718XX_REG_BUCK1_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
+			.enable_time = BD71847_BUCK1_STARTUP_TIME,
 			.owner = THIS_MODULE,
 			.of_parse_cb = buck_set_hw_dvs_levels,
 		},
@@ -646,6 +647,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
 			.vsel_mask = DVS_BUCK_RUN_MASK,
 			.enable_reg = BD718XX_REG_BUCK2_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
+			.enable_time = BD71847_BUCK2_STARTUP_TIME,
 			.owner = THIS_MODULE,
 			.of_parse_cb = buck_set_hw_dvs_levels,
 		},
@@ -680,6 +682,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
 			.linear_range_selectors = bd71847_buck3_volt_range_sel,
 			.enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
+			.enable_time = BD71847_BUCK3_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -706,6 +709,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
 			.vsel_range_mask = BD71847_BUCK4_RANGE_MASK,
 			.linear_range_selectors = bd71847_buck4_volt_range_sel,
 			.enable_mask = BD718XX_BUCK_EN,
+			.enable_time = BD71847_BUCK4_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -727,6 +731,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
 			.vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK,
 			.enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
+			.enable_time = BD71847_BUCK5_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -750,6 +755,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
 			.vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK,
 			.enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
+			.enable_time = BD71847_BUCK6_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -775,6 +781,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
 			.linear_range_selectors = bd718xx_ldo1_volt_range_sel,
 			.enable_reg = BD718XX_REG_LDO1_VOLT,
 			.enable_mask = BD718XX_LDO_EN,
+			.enable_time = BD71847_LDO1_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -796,6 +803,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
 			.n_voltages = ARRAY_SIZE(ldo_2_volts),
 			.enable_reg = BD718XX_REG_LDO2_VOLT,
 			.enable_mask = BD718XX_LDO_EN,
+			.enable_time = BD71847_LDO2_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -818,6 +826,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
 			.vsel_mask = BD718XX_LDO3_MASK,
 			.enable_reg = BD718XX_REG_LDO3_VOLT,
 			.enable_mask = BD718XX_LDO_EN,
+			.enable_time = BD71847_LDO3_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -840,6 +849,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
 			.vsel_mask = BD718XX_LDO4_MASK,
 			.enable_reg = BD718XX_REG_LDO4_VOLT,
 			.enable_mask = BD718XX_LDO_EN,
+			.enable_time = BD71847_LDO4_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -865,6 +875,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
 			.linear_range_selectors = bd71847_ldo5_volt_range_sel,
 			.enable_reg = BD718XX_REG_LDO5_VOLT,
 			.enable_mask = BD718XX_LDO_EN,
+			.enable_time = BD71847_LDO5_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -889,6 +900,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
 			.vsel_mask = BD718XX_LDO6_MASK,
 			.enable_reg = BD718XX_REG_LDO6_VOLT,
 			.enable_mask = BD718XX_LDO_EN,
+			.enable_time = BD71847_LDO6_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -942,6 +954,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.vsel_mask = DVS_BUCK_RUN_MASK,
 			.enable_reg = BD718XX_REG_BUCK1_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
+			.enable_time = BD71837_BUCK1_STARTUP_TIME,
 			.owner = THIS_MODULE,
 			.of_parse_cb = buck_set_hw_dvs_levels,
 		},
@@ -975,6 +988,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.vsel_mask = DVS_BUCK_RUN_MASK,
 			.enable_reg = BD718XX_REG_BUCK2_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
+			.enable_time = BD71837_BUCK2_STARTUP_TIME,
 			.owner = THIS_MODULE,
 			.of_parse_cb = buck_set_hw_dvs_levels,
 		},
@@ -1005,6 +1019,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.vsel_mask = DVS_BUCK_RUN_MASK,
 			.enable_reg = BD71837_REG_BUCK3_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
+			.enable_time = BD71837_BUCK3_STARTUP_TIME,
 			.owner = THIS_MODULE,
 			.of_parse_cb = buck_set_hw_dvs_levels,
 		},
@@ -1033,6 +1048,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.vsel_mask = DVS_BUCK_RUN_MASK,
 			.enable_reg = BD71837_REG_BUCK4_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
+			.enable_time = BD71837_BUCK4_STARTUP_TIME,
 			.owner = THIS_MODULE,
 			.of_parse_cb = buck_set_hw_dvs_levels,
 		},
@@ -1065,6 +1081,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.linear_range_selectors = bd71837_buck5_volt_range_sel,
 			.enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
+			.enable_time = BD71837_BUCK5_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -1088,6 +1105,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.vsel_mask = BD71837_BUCK6_MASK,
 			.enable_reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
+			.enable_time = BD71837_BUCK6_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -1109,6 +1127,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK,
 			.enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
+			.enable_time = BD71837_BUCK7_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -1132,6 +1151,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK,
 			.enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
 			.enable_mask = BD718XX_BUCK_EN,
+			.enable_time = BD71837_BUCK8_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -1157,6 +1177,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.linear_range_selectors = bd718xx_ldo1_volt_range_sel,
 			.enable_reg = BD718XX_REG_LDO1_VOLT,
 			.enable_mask = BD718XX_LDO_EN,
+			.enable_time = BD71837_LDO1_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -1178,6 +1199,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.n_voltages = ARRAY_SIZE(ldo_2_volts),
 			.enable_reg = BD718XX_REG_LDO2_VOLT,
 			.enable_mask = BD718XX_LDO_EN,
+			.enable_time = BD71837_LDO2_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -1200,6 +1222,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.vsel_mask = BD718XX_LDO3_MASK,
 			.enable_reg = BD718XX_REG_LDO3_VOLT,
 			.enable_mask = BD718XX_LDO_EN,
+			.enable_time = BD71837_LDO3_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -1222,6 +1245,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.vsel_mask = BD718XX_LDO4_MASK,
 			.enable_reg = BD718XX_REG_LDO4_VOLT,
 			.enable_mask = BD718XX_LDO_EN,
+			.enable_time = BD71837_LDO4_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -1246,6 +1270,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.vsel_mask = BD71837_LDO5_MASK,
 			.enable_reg = BD718XX_REG_LDO5_VOLT,
 			.enable_mask = BD718XX_LDO_EN,
+			.enable_time = BD71837_LDO5_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -1272,6 +1297,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.vsel_mask = BD718XX_LDO6_MASK,
 			.enable_reg = BD718XX_REG_LDO6_VOLT,
 			.enable_mask = BD718XX_LDO_EN,
+			.enable_time = BD71837_LDO6_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
@@ -1296,6 +1322,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
 			.vsel_mask = BD71837_LDO7_MASK,
 			.enable_reg = BD71837_REG_LDO7_VOLT,
 			.enable_mask = BD718XX_LDO_EN,
+			.enable_time = BD71837_LDO7_STARTUP_TIME,
 			.owner = THIS_MODULE,
 		},
 		.init = {
diff --git a/include/linux/mfd/rohm-bd718x7.h b/include/linux/mfd/rohm-bd718x7.h
index bee2474a8f9f..fba80dc2c1d5 100644
--- a/include/linux/mfd/rohm-bd718x7.h
+++ b/include/linux/mfd/rohm-bd718x7.h
@@ -323,4 +323,34 @@ struct bd718xx {
 	struct regmap_irq_chip_data *irq_data;
 };
 
+/* Typical regulator startup times as per data sheet in uS */
+#define BD71847_BUCK1_STARTUP_TIME 144
+#define BD71847_BUCK2_STARTUP_TIME 162
+#define BD71847_BUCK3_STARTUP_TIME 162
+#define BD71847_BUCK4_STARTUP_TIME 240
+#define BD71847_BUCK5_STARTUP_TIME 270
+#define BD71847_BUCK6_STARTUP_TIME 200
+#define BD71847_LDO1_STARTUP_TIME  440
+#define BD71847_LDO2_STARTUP_TIME  370
+#define BD71847_LDO3_STARTUP_TIME  310
+#define BD71847_LDO4_STARTUP_TIME  400
+#define BD71847_LDO5_STARTUP_TIME  530
+#define BD71847_LDO6_STARTUP_TIME  400
+
+#define BD71837_BUCK1_STARTUP_TIME 160
+#define BD71837_BUCK2_STARTUP_TIME 180
+#define BD71837_BUCK3_STARTUP_TIME 180
+#define BD71837_BUCK4_STARTUP_TIME 180
+#define BD71837_BUCK5_STARTUP_TIME 160
+#define BD71837_BUCK6_STARTUP_TIME 240
+#define BD71837_BUCK7_STARTUP_TIME 220
+#define BD71837_BUCK8_STARTUP_TIME 200
+#define BD71837_LDO1_STARTUP_TIME  440
+#define BD71837_LDO2_STARTUP_TIME  370
+#define BD71837_LDO3_STARTUP_TIME  310
+#define BD71837_LDO4_STARTUP_TIME  400
+#define BD71837_LDO5_STARTUP_TIME  310
+#define BD71837_LDO6_STARTUP_TIME  400
+#define BD71837_LDO7_STARTUP_TIME  530
+
 #endif /* __LINUX_MFD_BD718XX_H__ */
-- 
2.29.2


             reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-18 18:38 Guido Günther [this message]
2020-12-21  6:08 ` Vaittinen, Matti
2020-12-21  8:12   ` Guido Günther
2020-12-21 17:35 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=41fb2ed19f584f138336344e2297ae7301f72b75.1608316658.git.agx@sigxcpu.org \
    --to=agx@sigxcpu.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-power@fi.rohmeurope.com \
    --cc=matti.vaittinen@fi.rohmeurope.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git
	git clone --mirror https://lore.kernel.org/lkml/10 lkml/git/10.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git