LKML Archive on lore.kernel.org
 help / color / Atom feed
From: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
To: Dmitry Osipenko <digetx@gmail.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Vladimir Zapolskiy <vz@mleia.com>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/7] regulator: push allocation in regulator_ena_gpio_request() out of lock
Date: Wed, 12 Aug 2020 03:31:34 +0200
Message-ID: <41fe6a9670335721b48e8f5195038c3d67a3bf92.1597195321.git.mirq-linux@rere.qmqm.pl> (raw)
In-Reply-To: <cover.1597195321.git.mirq-linux@rere.qmqm.pl>

Move another allocation out of regulator_list_mutex-protected region, as
reclaim might want to take the same lock.

WARNING: possible circular locking dependency detected
5.7.13+ #534 Not tainted
------------------------------------------------------
kswapd0/383 is trying to acquire lock:
c0e5d920 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x2c0

but task is already holding lock:
c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (fs_reclaim){+.+.}-{0:0}:
       fs_reclaim_acquire.part.11+0x40/0x50
       fs_reclaim_acquire+0x24/0x28
       kmem_cache_alloc_trace+0x40/0x1e8
       regulator_register+0x384/0x1630
       devm_regulator_register+0x50/0x84
       reg_fixed_voltage_probe+0x248/0x35c
[...]
other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(fs_reclaim);
                               lock(regulator_list_mutex);
                               lock(fs_reclaim);
  lock(regulator_list_mutex);

 *** DEADLOCK ***
[...]
2 locks held by kswapd0/383:
 #0: c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50
 #1: cb70e5e0 (hctx->srcu){....}-{0:0}, at: hctx_lock+0x60/0xb8
[...]

Fixes: 541d052d7215 ("regulator: core: Only support passing enable GPIO descriptors")
[this commit only changes context]
Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking")
[this is when the regulator_list_mutex was introduced in reclaim locking path]

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
 drivers/regulator/core.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 510d234f6c46..3dd4d4914075 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2203,10 +2203,13 @@ EXPORT_SYMBOL_GPL(regulator_bulk_unregister_supply_alias);
 static int regulator_ena_gpio_request(struct regulator_dev *rdev,
 				const struct regulator_config *config)
 {
-	struct regulator_enable_gpio *pin;
+	struct regulator_enable_gpio *pin, *new_pin;
 	struct gpio_desc *gpiod;
 
 	gpiod = config->ena_gpiod;
+	new_pin = kzalloc(sizeof(*new_pin), GFP_KERNEL);
+
+	mutex_lock(&regulator_list_mutex);
 
 	list_for_each_entry(pin, &regulator_ena_gpio_list, list) {
 		if (pin->gpiod == gpiod) {
@@ -2215,9 +2218,13 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev,
 		}
 	}
 
-	pin = kzalloc(sizeof(struct regulator_enable_gpio), GFP_KERNEL);
-	if (pin == NULL)
+	if (new_pin == NULL) {
+		mutex_unlock(&regulator_list_mutex);
 		return -ENOMEM;
+	}
+
+	pin = new_pin;
+	new_pin = NULL;
 
 	pin->gpiod = gpiod;
 	list_add(&pin->list, &regulator_ena_gpio_list);
@@ -2225,6 +2232,10 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev,
 update_ena_gpio_to_rdev:
 	pin->request_count++;
 	rdev->ena_pin = pin;
+
+	mutex_unlock(&regulator_list_mutex);
+	kfree(new_pin);
+
 	return 0;
 }
 
@@ -5179,9 +5190,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	}
 
 	if (config->ena_gpiod) {
-		mutex_lock(&regulator_list_mutex);
 		ret = regulator_ena_gpio_request(rdev, config);
-		mutex_unlock(&regulator_list_mutex);
 		if (ret != 0) {
 			rdev_err(rdev, "Failed to request enable GPIO: %d\n",
 				 ret);
-- 
2.20.1


  parent reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-12  1:31 [PATCH v2 0/7] regulator: fix deadlock vs memory reclaim Michał Mirosław
2020-08-12  1:31 ` [PATCH v2 1/7] regulator: push allocation in regulator_init_coupling() outside of lock Michał Mirosław
2020-08-12  1:31 ` Michał Mirosław [this message]
2020-08-18  0:25   ` [PATCH v2 2/7] regulator: push allocation in regulator_ena_gpio_request() out " Dmitry Osipenko
2020-08-12  1:31 ` [PATCH v2 3/7] regulator: push allocations in create_regulator() outside " Michał Mirosław
2020-08-12  1:31 ` [PATCH v2 5/7] regulator: plug of_node leak in regulator_register()'s error path Michał Mirosław
2020-08-12  6:29   ` Vladimir Zapolskiy
2020-08-12 14:09     ` Michał Mirosław
2020-08-13  8:29       ` Vladimir Zapolskiy
2020-08-12  1:31 ` [PATCH v2 4/7] regulator: push allocation in set_consumer_device_supply() out of lock Michał Mirosław
2020-08-12  1:31 ` [PATCH v2 6/7] regulator: cleanup regulator_ena_gpio_free() Michał Mirosław
2020-08-12  1:31 ` [PATCH v2 7/7] regulator: remove superfluous lock in regulator_resolve_coupling() Michał Mirosław

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=41fe6a9670335721b48e8f5195038c3d67a3bf92.1597195321.git.mirq-linux@rere.qmqm.pl \
    --to=mirq-linux@rere.qmqm.pl \
    --cc=broonie@kernel.org \
    --cc=digetx@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vz@mleia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git