Linux version 2.6.11-rc3-mm1 (laurent@antares.localdomain) (gcc version 3.4.1 (Mandrakelinux 10.1 3.4.1-4mdk)) #3 Fri Feb 4 22:03:29 CET 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ffec000 (usable) BIOS-e820: 000000000ffec000 - 000000000ffef000 (ACPI data) BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved) BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65516 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61420 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ASUS ) @ 0x000f6a80 ACPI: RSDT (v001 ASUS A7V133-C 0x30303031 MSFT 0x31313031) @ 0x0ffec000 ACPI: FADT (v001 ASUS A7V133-C 0x30303031 MSFT 0x31313031) @ 0x0ffec080 ACPI: BOOT (v001 ASUS A7V133-C 0x30303031 MSFT 0x31313031) @ 0x0ffec040 ACPI: DSDT (v001 ASUS A7V133-C 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0xe408 Built 1 zonelists Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01201000) Initializing CPU#0 Kernel command line: root=/dev/hda6 resume=/dev/hdb6 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 1407.170 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 256288k/262064k available (1546k kernel code, 5164k reserved, 742k data, 152k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2785.28 BogoMIPS (lpj=1392640) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(TM) XP 1600+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:................................................................................................................... Table [DSDT](id F004) - 356 Objects with 38 Devices 115 Methods 24 Regions ACPI Namespace successfully loaded at root c037c6a0 ACPI: setting ELCR to 0200 (from 0c20) evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 71k freed softlockup thread 0 started up. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050125 evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 evgpeblk-0987 [06] ev_create_gpe_block : Found 4 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:....................................................... Initialized 23/24 Regions 2/2 Fields 19/19 Buffers 11/14 Packages (365 nodes) Executing all Device _STA and_INI methods:......................................... 41 Devices found containing: 41 _STA, 0 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Via IRQ fixup ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. Simple Boot Flag at 0x3a set to 0x1 Machine check exception polling timer started. Initializing Cryptographic API Applying VIA southbridge workaround. PCI: Disabling Via external APIC routing ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 rivafb: nVidia device/chipset 10DE0110 rivafb: nVidia Corporation NV11 [GeForce2 MX/MX 400] rivafb: Detected CRTC controller 0 being used rivafb: RIVA MTRR set to ON rivafb: Found EDID Block from BUS 0 rivafb: setting virtual Y resolution to 93206 Console: switching to colour frame buffer device 90x25 rivafb: PCI nVidia NV11 framebuffer ver 0.9.5b (64MB @ 0xD8000000) ACPI: Power Button (FF) [PWRF] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 16 throttling states) inotify device minor=63 ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1 ACPI: PS/2 Mouse Controller [PS2M] at irq 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:04.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:04.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: ST340016A, ATA DISK drive hdb: Maxtor 6Y080L0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: CD-950E/AKU, ATAPI CD/DVD-ROM drive hdd: LITE-ON LTR-48125S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 > hda4 hdb: max request size: 128KiB hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 > mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 ACPI wakeup devices: PWRB PCI0 UAR1 UAR2 USB0 USB1 ACPI: (supports S0 S1 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 2 devices found RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds Freeing unused kernel memory: 152k freed usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI interrupt 0000:00:04.2[D] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:04.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:04.2: irq 5, io base 0xd400 uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:04.3[D] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:04.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:04.3: irq 5, io base 0xd000 uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 2 ub: sizeof ub_scsi_cmd 64 ub_dev 2472 EXT3 FS on hda6, internal journal usb 1-2: new low speed USB device using uhci_hcd and address 3 register_blkdev: failed to get major for device-mapper uba: device 2 capacity nsec 258048 bsize 512 uba: device 2 capacity nsec 258048 bsize 512 uba: uba1 usbcore: registered new driver ub Adding 64220k swap on /dev/hda5. Priority:-1 extents:1 Adding 1052216k swap on /dev/hdb6. Priority:-2 extents:1 usb 2-2: new full speed USB device using uhci_hcd and address 2 input: USB HID v1.10 Gamepad [THRUSTMASTER FireStorm Dual Analog 2] on usb-0000:00:04.2-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA Twister-K/KT133x/KM133 chipset agpgart: AGP aperture is 64M @ 0xe4000000 input: PC Speaker register_blkdev: failed to get major for device-mapper register_blkdev: failed to get major for device-mapper loop: loaded (max 8 devices) register_blkdev: failed to get major for device-mapper usbcore: deregistering driver ub uhci_hcd 0000:00:04.2: remove, state 1 usb usb1: USB disconnect, address 1 usb 1-1: USB disconnect, address 2 usb 1-2: USB disconnect, address 3 uhci_hcd 0000:00:04.2: USB bus 1 deregistered uhci_hcd 0000:00:04.3: remove, state 1 usb usb2: USB disconnect, address 1 usb 2-2: USB disconnect, address 2 uhci_hcd 0000:00:04.3: USB bus 2 deregistered usbcore: deregistering driver usbhid usbcore: deregistering driver usbfs usbcore: deregistering driver hub register_blkdev: failed to get major for device-mapper register_blkdev: failed to get major for device-mapper register_blkdev: failed to get major for device-mapper