From: Amit Kucheria <amit.kucheria@linaro.org>
To: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
bjorn.andersson@linaro.org, edubezval@gmail.com,
andy.gross@linaro.org, Daniel Lezcano <daniel.lezcano@linaro.org>,
David Brown <david.brown@linaro.org>,
Zhang Rui <rui.zhang@intel.com>
Cc: devicetree@vger.kernel.org
Subject: [PATCH v1 23/24] arm64: dts: qcom: qcs404: Add thermal zones for each sensor
Date: Thu, 7 Feb 2019 16:19:41 +0530 [thread overview]
Message-ID: <42fd6c63c58db82088924c70d016e03a2b6fa9fe.1549525708.git.amit.kucheria@linaro.org> (raw)
In-Reply-To: <cover.1549525708.git.amit.kucheria@linaro.org>
In-Reply-To: <cover.1549525708.git.amit.kucheria@linaro.org>
qcs404 has 10 sensors connected to the single TSENS IP. Define a thermal
zone for each of those sensors to expose the temperature of each zone.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/qcs404.dtsi | 243 +++++++++++++++++++++++++++
1 file changed, 243 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 57d14d8f0c90..ca99c45864df 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-qcs404.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
@@ -30,6 +31,7 @@
reg = <0x100>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ #cooling-cells= <2>;
};
CPU1: cpu@101 {
@@ -38,6 +40,7 @@
reg = <0x101>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ #cooling-cells= <2>;
};
CPU2: cpu@102 {
@@ -46,6 +49,7 @@
reg = <0x102>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ #cooling-cells= <2>;
};
CPU3: cpu@103 {
@@ -54,6 +58,7 @@
reg = <0x103>;
enable-method = "psci";
next-level-cache = <&L2_0>;
+ #cooling-cells= <2>;
};
L2_0: l2-cache {
@@ -507,4 +512,242 @@
#interrupt-cells = <2>;
};
};
+
+ thermal-zones {
+ aoss-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 0>;
+
+ trips {
+ aoss_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ aoss_crit: aoss_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ dsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ dsp_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ dsp_crit: dsp_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ lpass-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ lpass_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ lpass_crit: lpass_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ wlan-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ wlan_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ wlan_crit: wlan_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ cluster_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cluster_crit: cluster_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ cpu0_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu0_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 6>;
+
+ trips {
+ cpu1_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu1_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 7>;
+
+ trips {
+ cpu2_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu2_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 8>;
+
+ trips {
+ cpu3_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu3_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert0>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 9>;
+
+ trips {
+ gpu_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ gpu_crit: gpu_crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
};
--
2.17.1
next prev parent reply other threads:[~2019-02-07 12:57 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-07 10:49 [PATCH v1 00/24] thermal: tsens: Refactor to use regmap_field Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 01/24] drivers: thermal: tsens: Document the data structures Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 02/24] drivers: thermal: tsens: Rename tsens_data Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 03/24] drivers: thermal: tsens: Rename tsens_device Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 04/24] drivers: thermal: tsens: Rename variable tmdev Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 05/24] drivers: thermal: tsens: Use consistent names for variables Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 06/24] drivers: thermal: tsens: Function prototypes should have argument names Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 07/24] drivers: thermal: tsens: Rename tsens-8916 to prepare to merge with tsens-8974 Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 08/24] drivers: thermal: tsens: Rename constants " Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 09/24] drivers: thermal: tsens: Merge tsens-8974 into tsens-v0_1 Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 10/24] drivers: thermal: tsens: Introduce reg_fields to deal with register description Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 11/24] drivers: thermal: tsens: Save reference to the device pointer and use it Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 12/24] drivers: thermal: tsens: Don't print error message on -EPROBE_DEFER Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 13/24] drivers: thermal: tsens: Print IP version Amit Kucheria
2019-02-20 1:17 ` Eduardo Valentin
2019-02-20 9:19 ` Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 14/24] drivers: thermal: tsens: Add new operation to check if a sensor is enabled Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 15/24] drivers: thermal: tsens: change data type for sensor IDs Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 16/24] drivers: thermal: tsens: Introduce IP-specific max_sensor count Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 17/24] drivers: thermal: tsens: simplify get_temp_tsens_v2 routine Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 18/24] drivers: thermal: tsens: Move get_temp_tsens_v2 to allow sharing Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 19/24] drivers: thermal: tsens: Common get_temp() learns to do ADC conversion Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 20/24] dt: thermal: tsens: Add bindings for qcs404 Amit Kucheria
2019-02-25 22:31 ` Rob Herring
2019-02-07 10:49 ` [PATCH v1 21/24] drivers: thermal: tsens: Add generic support for TSENS v1 IP Amit Kucheria
2019-02-20 1:12 ` Eduardo Valentin
2019-02-07 10:49 ` [PATCH v1 22/24] arm64: dts: qcom: qcs404: Add tsens controller Amit Kucheria
2019-02-07 10:49 ` Amit Kucheria [this message]
2019-02-20 1:09 ` [PATCH v1 23/24] arm64: dts: qcom: qcs404: Add thermal zones for each sensor Eduardo Valentin
2019-02-20 9:40 ` Amit Kucheria
2019-02-07 10:49 ` [PATCH v1 24/24] drivers: thermal: tsens: Move calibration constants to header file Amit Kucheria
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42fd6c63c58db82088924c70d016e03a2b6fa9fe.1549525708.git.amit.kucheria@linaro.org \
--to=amit.kucheria@linaro.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).