Randy.Dunlap wrote:

>On Thu, 22 Sep 2005, David R wrote:
>
>  
>
>>>      
>>>
>>>>DMA is broken in 2.6.13.2 and opensuse 2.6.13-15, for  my  cdrom/dvd
>>>>
>>>>
>>>>        
>>>>
>>>particular that you turned off IDE PCI
>>>
>>>
>>>      
>>>
>>You are totaly correct and I apologize for that, the last thing I want
>>to do is increase the noise level.  I spent several hours trying to get
>>netconsole to work with this, but I spose it just happens to soon. Im
>>getting an oops now. (The oops was happening a week or so ago when I
>>first tried to upgrade from .12 to .13 by simply using make oldconfig
>>and going from there, then I started poking around and eventualy the
>>drive worked but with no dma)  Attached is my current oops generating
>>config. Here is a digicam shot of my screen:
>>
>>    
>>
>
>if you can't use serial console or netconsole, can you use a
>smaller screen font so that we can see more oops info?
>that screen shot is missing a good bit of info.
>  
>
Anything for Linux!

Ok, here are two more pictures:

http://rawdod.com/photo20050921-15:43:40-0066.jpg

http://rawdod.com/photo20050921-15:41:39-0065.jpg


Attached is my dmesg output from 2.6.12 to compare with.

Thanks!

David


>  
>
>>Again my drive is a:
>>
>>LITE-ON DVDRW SOHW-1693S, FwRev=KS09
>>
>>And my IDE chip is a:
>>VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
>>
>>Thanks!
>>
>>-David
>>
>>ps. Your beard rocks!
>>    
>>
>
>  
>