linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yu Kuai <yukuai1@huaweicloud.com>
To: Bagas Sanjaya <bagasdotme@gmail.com>,
	Christoph Hellwig <hch@lst.de>, Song Liu <song@kernel.org>,
	AceLan Kao <acelan@gmail.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Linux Regressions <regressions@lists.linux.dev>,
	Linux RAID <linux-raid@vger.kernel.org>,
	"yukuai (C)" <yukuai3@huawei.com>
Subject: Re: Fwd: Infiniate systemd loop when power off the machine with multiple MD RAIDs
Date: Mon, 21 Aug 2023 21:18:28 +0800	[thread overview]
Message-ID: <433392a3-5ec4-cd63-fa5b-58e24deb56b9@huaweicloud.com> (raw)
In-Reply-To: <028a21df-4397-80aa-c2a5-7c754560f595@gmail.com>

Hi,

在 2023/08/16 17:37, Bagas Sanjaya 写道:
> Hi,
> 
> I notice a regression report on Bugzilla [1]. Quoting from it:
> 
>> It needs to build at least 2 different RAIDs(eg. RAID0 and RAID10, RAID5 and RAID10) and then you will see below error repeatly(need to use serial console to see it)
>>
>> [ 205.360738] systemd-shutdown[1]: Stopping MD devices.
>> [ 205.366384] systemd-shutdown[1]: sd-device-enumerator: Scan all dirs
>> [ 205.373327] systemd-shutdown[1]: sd-device-enumerator: Scanning /sys/bus
>> [ 205.380427] systemd-shutdown[1]: sd-device-enumerator: Scanning /sys/class
>> [ 205.388257] systemd-shutdown[1]: Stopping MD /dev/md127 (9:127).
>> [ 205.394880] systemd-shutdown[1]: Failed to sync MD block device /dev/md127, ignoring: Input/output error
>> [ 205.404975] md: md127 stopped.
>> [ 205.470491] systemd-shutdown[1]: Stopping MD /dev/md126 (9:126).
>> [ 205.770179] md: md126: resync interrupted.
>> [ 205.776258] md126: detected capacity change from 1900396544 to 0
>> [ 205.783349] md: md126 stopped.
>> [ 205.862258] systemd-shutdown[1]: Stopping MD /dev/md125 (9:125).
>> [ 205.862435] md: md126 stopped.
>> [ 205.868376] systemd-shutdown[1]: Failed to sync MD block device /dev/md125, ignoring: Input/output error
>> [ 205.872845] block device autoloading is deprecated and will be removed.
>> [ 205.880955] md: md125 stopped.
>> [ 205.934349] systemd-shutdown[1]: Stopping MD /dev/md124p2 (259:7).
>> [ 205.947707] systemd-shutdown[1]: Could not stop MD /dev/md124p2: Device or resource busy
>> [ 205.957004] systemd-shutdown[1]: Stopping MD /dev/md124p1 (259:6).
>> [ 205.964177] systemd-shutdown[1]: Could not stop MD /dev/md124p1: Device or resource busy
>> [ 205.973155] systemd-shutdown[1]: Stopping MD /dev/md124 (9:124).
>> [ 205.979789] systemd-shutdown[1]: Could not stop MD /dev/md124: Device or resource busy
>> [ 205.988475] systemd-shutdown[1]: Not all MD devices stopped, 4 left.

Without the problem, did the log complain about this?

Could not stop MD...Device or resource busy

Thanks,
Kuai

> 
> See Bugzilla for the full thread and attached full journalctl log.
> 
> Anyway, I'm adding this regression to be tracked by regzbot:
> 
> #regzbot introduced: 12a6caf273240a https://bugzilla.kernel.org/show_bug.cgi?id=217798
> #regzbot title: systemd shutdown hang on machine with different RAID levels
> 
> Thanks.
> 
> [1]: https://bugzilla.kernel.org/show_bug.cgi?id=217798
> 


  parent reply	other threads:[~2023-08-21 13:18 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-16  9:37 Fwd: Infiniate systemd loop when power off the machine with multiple MD RAIDs Bagas Sanjaya
2023-08-18  8:16 ` Mariusz Tkaczyk
2023-08-18  9:21   ` Hannes Reinecke
2023-08-21  3:23     ` AceLan Kao
2023-08-22  3:51   ` Guoqing Jiang
2023-08-22  6:17     ` Song Liu
2023-08-22  6:39       ` Mariusz Tkaczyk
2023-08-22  8:13         ` AceLan Kao
2023-08-22 12:41           ` Guoqing Jiang
2023-08-23  8:02             ` AceLan Kao
2023-08-23 13:25               ` Song Liu
2023-08-26  4:31                 ` AceLan Kao
2023-08-28  5:20                   ` Song Liu
2023-08-28 10:48                     ` AceLan Kao
2023-08-29  3:12                       ` AceLan Kao
2023-08-28 13:50                     ` Yu Kuai
2023-08-31  2:28                       ` Yu Kuai
2023-08-31  6:50                         ` Mariusz Tkaczyk
2023-09-06  6:26                           ` AceLan Kao
2023-09-06 10:27                             ` Mariusz Tkaczyk
2023-09-07  2:04                               ` Yu Kuai
2023-09-07 10:18                                 ` Mariusz Tkaczyk
     [not found]                                   ` <cffca94f-5729-622d-9327-632b3ff2891a@huaweicloud.com>
     [not found]                                     ` <3e7edf0c-cadd-59b0-4e10-dffdb86b93b7@huaweicloud.com>
2023-09-07 12:41                                       ` Mariusz Tkaczyk
2023-09-07 12:53                                         ` Yu Kuai
2023-09-07 15:09                                           ` Mariusz Tkaczyk
2023-09-08 20:25                                             ` Song Liu
2023-08-21 13:18 ` Yu Kuai [this message]
2023-08-22  1:39   ` Fwd: " AceLan Kao
2023-08-22 18:56 ` Song Liu
2023-08-22 19:13   ` Carlos Carvalho
2023-08-23  1:28     ` Yu Kuai
2023-08-23  6:04       ` Hannes Reinecke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=433392a3-5ec4-cd63-fa5b-58e24deb56b9@huaweicloud.com \
    --to=yukuai1@huaweicloud.com \
    --cc=acelan@gmail.com \
    --cc=bagasdotme@gmail.com \
    --cc=hch@lst.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-raid@vger.kernel.org \
    --cc=regressions@lists.linux.dev \
    --cc=song@kernel.org \
    --cc=yukuai3@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).