linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Merlijn Wajer <merlijn@wizzup.org>
To: kvalo@codeaurora.org
Cc: linux-omap <linux-omap@vger.kernel.org>,
	linux-wireless@vger.kernel.org, Tony Lindgren <tony@atomide.com>,
	Sebastian Reichel <sre@kernel.org>, Pavel Machek <pavel@ucw.cz>,
	linux-kernel@vger.kernel.org, vigneshr@ti.com,
	broonie@kernel.org
Subject: Re: Nokia N900: wl1251 spi3.0: EOW timed out on
Date: Sun, 10 Mar 2019 01:53:38 +0100	[thread overview]
Message-ID: <436a9a35-539a-3fe8-2225-36b45c7e5412@wizzup.org> (raw)
In-Reply-To: <3819003e-2ab3-0325-de0d-9fa07b51ee9f@wizzup.org>


[-- Attachment #1.1: Type: text/plain, Size: 41970 bytes --]


Hi,

On 10/03/2019 00:22, Merlijn Wajer wrote:
> Hi,
> 
> I just migrated to Linux 5.0  (from 4.15) on my Nokia N900, and I'm
> getting a lot of messages like this:
> 
>> wl1251 spi3.0: EOW timed out
> 
> and it ends with:
> 
>> [   29.072174] wl1251: ERROR chip id doesn't match after firmware boot
> 
> My tree carries some patches, but none are related to SPI or wl1251. Any
> clue what might be up?

Reverting these three commits makes the problem go away:

commit 89e8b9cb846515e4435eb42df7009b824cf3405a
Author: Vignesh R <vigneshr@ti.com>
Date:   Mon Oct 15 12:08:29 2018 +0530

    spi: omap2-mcspi: Add slave mode support


commit b682cffa3ac6d9d9e16e9b413c45caee3b391fab
Author: Vignesh R <vigneshr@ti.com>
Date:   Mon Oct 15 12:08:28 2018 +0530

    spi: omap2-mcspi: Set FIFO DMA trigger level to word length


commit 13d515c796adc49a49b0cd2212ccd7f43a37fc5a
Author: Vignesh R <vigneshr@ti.com>
Date:   Mon Oct 15 12:08:27 2018 +0530

    spi: omap2-mcspi: Switch to readl_poll_timeout()

I reverted 13d515c796adc49a49b0cd2212ccd7f43a37fc5a before, and that
didn't make the difference, so I assume the problematic commit is either
b682cffa3ac6d9d9e16e9b413c45caee3b391fab or
89e8b9cb846515e4435eb42df7009b824cf3405a

Cheers,
Merlijn

> dmesg attached.
> 
> Cheers,
> Merlijn
> 
> [1]
> 
> [    0.000000] Booting Linux on physical CPU 0x0
> [    0.000000] Linux version 5.0.0+ (merlijn@kgpe-d16) (gcc version
> 7.3.0 (Gentoo Hardened 7.3.0-r3 p1.4)) #6 PREEMPT Wed Mar 6 08:35:59 CET
> 2019
> [    0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7),
> cr=10c5387d
> [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing
> instruction cache
> [    0.000000] OF: fdt: Machine model: Nokia N900
> [    0.000000] Memory policy: Data cache writeback
> [    0.000000] On node 0 totalpages: 65280
> [    0.000000]   Normal zone: 510 pages used for memmap
> [    0.000000]   Normal zone: 0 pages reserved
> [    0.000000]   Normal zone: 65280 pages, LIFO batch:15
> [    0.000000] CPU: All CPU(s) started in SVC mode.
> [    0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp)
> [    0.000000] random: get_random_bytes called from
> start_kernel+0x80/0x3fc with crng_init=0
> [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
> [    0.000000] pcpu-alloc: [0] 0
> [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64770
> [    0.000000] Kernel command line: root=/dev/mmcblk0p2 rootwait rw
> mtdoops.mtddev=log console=tty1 omapfb.vram=0:4M
> omapfb.mode=lcd:848x480-16 nokia-modem.pm=1
> [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
> bytes)
> [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> [    0.000000] Memory: 216140K/261120K available (6144K kernel code,
> 258K rwdata, 1856K rodata, 1024K init, 32920K bss, 44980K reserved, 0K
> cma-reserved, 0K highmem)
> [    0.000000] Virtual kernel memory layout:
>                    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
>                    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
>                    vmalloc : 0xd0000000 - 0xff800000   ( 760 MB)
>                    lowmem  : 0xc0000000 - 0xcff00000   ( 255 MB)
>                    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
>                    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
>                      .text : 0x(ptrval) - 0x(ptrval)   (7136 kB)
>                      .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
>                      .data : 0x(ptrval) - 0x(ptrval)   ( 259 kB)
>                       .bss : 0x(ptrval) - 0x(ptrval)   (32921 kB)
> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> [    0.000000] rcu: Preemptible hierarchical RCU implementation.
> [    0.000000]  Tasks RCU enabled.
> [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay
> is 10 jiffies.
> [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> [    0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 4.0) with 96
> interrupts
> [    0.000000] Clocking rate (Crystal/Core/MPU): 19.2/332/500 MHz
> [    0.000000] OMAP clockevent source: timer1 at 32768 Hz
> [    0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 58327039986419 ns
> [    0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps
> every 65535999984741ns
> [    0.000030] OMAP clocksource: 32k_counter at 32768 Hz
> [    0.000579] Console: colour dummy device 80x30
> [    0.001647] printk: console [tty1] enabled
> [    0.001708] Calibrating delay loop... 496.43 BogoMIPS (lpj=2482176)
> [    0.048919] pid_max: default: 32768 minimum: 301
> [    0.049133] LSM: Security Framework initializing
> [    0.049255] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
> [    0.049316] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
> bytes)
> [    0.050628] CPU: Testing write buffer coherency: ok
> [    0.050750] CPU0: Spectre v2: using BPIALL workaround
> [    0.052307] Setting up static identity map for 0x80100000 - 0x80100060
> [    0.052612] rcu: Hierarchical SRCU implementation.
> [    0.056457] devtmpfs: initialized
> [    0.086242] VFP support v0.3: implementor 41 architecture 3 part 30
> variant c rev 1
> [    0.086944] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 19112604462750000 ns
> [    0.087036] futex hash table entries: 256 (order: -1, 3072 bytes)
> [    0.087280] xor: measuring software checksum speed
> [    0.178619]    arm4regs  :   623.600 MB/sec
> [    0.278381]    8regs     :   459.600 MB/sec
> [    0.378173]    32regs    :   600.000 MB/sec
> [    0.477966]    neon      :   444.800 MB/sec
> [    0.477996] xor: using function: arm4regs (623.600 MB/sec)
> [    0.478149] pinctrl core: initialized pinctrl subsystem
> [    0.479644] NET: Registered protocol family 16
> [    0.481414] DMA: preallocated 256 KiB pool for atomic coherent
> allocations
> [    0.501464] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
> [    0.502136] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
> [    0.552520] cpuidle: using governor ladder
> [    0.552612] cpuidle: using governor menu
> [    0.553283] Reprogramming SDRC clock to 332000000 Hz
> [    0.559783] OMAP GPIO hardware version 2.5
> [    0.582397] RX-51: Enabling ARM errata 430973 workaround
> [    0.584259] RX-51: Registering OMAP3 HWRNG device
> [    0.584808] hw-breakpoint: debug architecture 0x4 unsupported.
> [    0.586090] Reserving DMA channels 0 and 1 for HS ROM code
> [    0.586151] OMAP DMA hardware revision 4.0
> [    0.767700] raid6: neonx8   gen()   156 MB/s
> [    0.937103] raid6: neonx8   xor()   205 MB/s
> [    1.106658] raid6: neonx4   gen()   595 MB/s
> [    1.276367] raid6: neonx4   xor()   447 MB/s
> [    1.446044] raid6: neonx2   gen()   463 MB/s
> [    1.615631] raid6: neonx2   xor()   380 MB/s
> [    1.785247] raid6: neonx1   gen()   229 MB/s
> [    1.955017] raid6: neonx1   xor()   212 MB/s
> [    2.125213] raid6: int32x8  gen()    89 MB/s
> [    2.294403] raid6: int32x8  xor()    58 MB/s
> [    2.464355] raid6: int32x4  gen()    90 MB/s
> [    2.553649] random: fast init done
> [    2.633544] raid6: int32x4  xor()    70 MB/s
> [    2.803527] raid6: int32x2  gen()   110 MB/s
> [    2.972930] raid6: int32x2  xor()    69 MB/s
> [    3.142791] raid6: int32x1  gen()    55 MB/s
> [    3.312438] raid6: int32x1  xor()    45 MB/s
> [    3.312469] raid6: using algorithm neonx4 gen() 595 MB/s
> [    3.312499] raid6: .... xor() 447 MB/s, rmw enabled
> [    3.312530] raid6: using neon recovery algorithm
> [    3.328796] omap-dma-engine 48056000.dma-controller: OMAP DMA engine
> driver
> [    3.335205] omap-iommu 480bd400.mmu: 480bd400.mmu registered
> [    3.335845] iommu: Adding device 480bc000.isp to group 0
> [    3.336273] usbcore: registered new interface driver usbfs
> [    3.336425] usbcore: registered new interface driver hub
> [    3.336639] usbcore: registered new device driver usb
> [    3.338134] omap-mailbox 48094000.mailbox: omap mailbox rev 0x40
> [    3.338806] Advanced Linux Sound Architecture Driver Initialized.
> [    3.340484] clocksource: Switched to clocksource 32k_counter
> [    3.340728] VFS: Disk quotas dquot_6.6.0
> [    3.340881] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
> bytes)
> [    3.357482] NET: Registered protocol family 2
> [    3.358886] tcp_listen_portaddr_hash hash table entries: 512 (order:
> 0, 4096 bytes)
> [    3.358978] TCP established hash table entries: 2048 (order: 1, 8192
> bytes)
> [    3.359069] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
> [    3.359130] TCP: Hash tables configured (established 2048 bind 2048)
> [    3.359374] UDP hash table entries: 256 (order: 0, 4096 bytes)
> [    3.359436] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
> [    3.359741] NET: Registered protocol family 1
> [    3.366088] Initialise system trusted keyrings
> [    3.366485] workingset: timestamp_bits=30 max_order=16 bucket_order=0
> [    3.379058] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> [    3.386352] Key type asymmetric registered
> [    3.386413] Asymmetric key parser 'x509' registered
> [    3.386474] io scheduler mq-deadline registered
> [    3.386505] io scheduler kyber registered
> [    3.388366] ti-sysc 480cb024.target-module: sysc_flags 00000100 !=
> 00000110
> [    3.389739] ti-sysc 480c9024.target-module: sysc_flags 00000100 !=
> 00000110
> [    3.392486] pinctrl-single 48002030.pinmux: 284 pins, size 568
> [    3.393218] pinctrl-single 48002a00.pinmux: 46 pins, size 92
> [    3.394042] pinctrl-single 480025d8.pinmux: 18 pins, size 36
> [    3.396789] omapdss_dss 48050000.dss: 48050000.dss supply vdda_video
> not found, using dummy regulator
> [    3.397064] omapdss_dss 48050000.dss: Linked as a consumer to regulator.0
> [    3.397247] OMAP DSS rev 2.0
> [    3.397521] omapdss_dss 48050000.dss: bound 48050400.dispc (ops
> dispc_component_ops)
> [    3.397888] omapdss_dss 48050000.dss: bound 48050c00.encoder (ops
> venc_component_ops)
> [    3.399566] omapfb omapfb: failed to connect default display
> [    3.399627] omapfb omapfb: failed to init overlay connections
> [    3.399871] omapfb omapfb: failed to setup omapfb
> [    3.402923] omap_uart 4806c000.serial: no wakeirq for uart1
> [    3.403289] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89,
> base_baud = 3000000) is a OMAP UART1
> [    3.404296] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90,
> base_baud = 3000000) is a OMAP UART2
> [    3.405761] omap3_rom_rng: initializing
> [    3.405975] omap3_rom_rng: unable to get RNG clock
> [    3.406036] omap3-rom-rng: probe of omap3-rom-rng failed with error -2
> [    3.424102] brd: module loaded
> [    3.439697] acx565akm spi0.2: omapfb: acx565akm rev ad LCD detected
> [    3.446807] i2c /dev entries driver
> [    3.447967] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout
> 60 sec
> [    3.450347] omap_gpio 49058000.gpio: Could not set line 0 debounce to
> 200000 microseconds (-22)
> [    3.450439] omap_hsmmc 4809c000.mmc: Got CD GPIO
> [    3.467132] Initializing XFRM netlink socket
> [    3.467254] NET: Registered protocol family 17
> [    3.467346] NET: Registered protocol family 15
> [    3.467407] NET: Registered protocol family 35
> [    3.467864] Key type dns_resolver registered
> [    3.468200] ThumbEE CPU extension supported.
> [    3.468322] omap2_set_init_voltage: unable to find boot up OPP for
> vdd_mpu_iva
> [    3.468353] omap2_set_init_voltage: unable to set vdd_mpu_iva
> [    3.468414] omap2_set_init_voltage: unable to find boot up OPP for
> vdd_core
> [    3.468475] omap2_set_init_voltage: unable to set vdd_core
> [    3.472229] SmartReflex Class3 initialized
> [    3.473449] registered taskstats version 1
> [    3.473510] Loading compiled-in X.509 certificates
> [    3.477539] Btrfs loaded, crc32c=crc32c-generic
> [    3.502410] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
> [    3.502502] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
> [    3.504272] omap2-onenand 1000000.onenand: initializing on CS0
> (0x01000000), va (ptrval), DMA mode
> [    3.504364] OneNAND Manufacturer: Unknown (0xa0)
> [    3.509002] Skipping twl internal clock init and using bootloader
> value (unknown osc rate)
> [    3.831176] twl 1-0048: PIH (irq 23) chaining IRQs 146..154
> [    3.831329] twl 1-0048: power (irq 151) chaining IRQs 154..161
> [    3.891784] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
> [    3.920745] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
> [    4.041534] twl_rtc 48070000.i2c:twl@48:rtc: registered as rtc0
> [    5.151458] V28_A: Bringing 2600000uV into 2800000-2800000uV
> [    5.962188] twl4030_gpio twl4030-gpio: gpio (irq 146) chaining IRQs
> 162..179
> [    6.110900] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Linked as a
> consumer to regulator.16
> [    6.170898] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Linked as a
> consumer to regulator.14
> [    6.230926] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Linked as a
> consumer to regulator.15
> [    6.721160] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Initialized
> TWL4030 USB module
> [    6.781066] input: twl4030_pwrbutton as
> /devices/platform/68000000.ocp/48070000.i2c/i2c-1/1-0048/48070000.i2c:twl@48:pwrbutton/input/input0
> [    6.782592] input: TWL4030 Keypad as
> /devices/platform/68000000.ocp/48070000.i2c/i2c-1/1-0048/48070000.i2c:twl@48:keypad/input/input1
> [    7.110839] twl4030_madc 48070000.i2c:twl@48:madc:
> 48070000.i2c:twl@48:madc supply vusb3v1 not found, using dummy regulator
> [    7.111114] twl4030_madc 48070000.i2c:twl@48:madc: Linked as a
> consumer to regulator.0
> [   13.170959] omap_i2c 48070000.i2c: bus 1 rev3.3 at 2200 kHz
> [   13.173492] tlv320aic3x-codec 2-0018: Linked as a consumer to regulator.8
> [   13.174011] tlv320aic3x-codec 2-0018: Linked as a consumer to
> regulator.13
> [   13.175476] tlv320aic3x-codec 2-0019: Linked as a consumer to regulator.8
> [   13.175903] tlv320aic3x-codec 2-0019: Linked as a consumer to
> regulator.13
> [   13.178161] tpa6130a2 2-0060: Linked as a consumer to regulator.13
> [   13.179412] omap_i2c 48072000.i2c: bus 2 rev3.3 at 100 kHz
> [   13.181793] omap_i2c 48060000.i2c: bus 3 rev3.3 at 400 kHz
> [   13.183044] omapdss_dss 48050000.dss: Linked as a consumer to regulator.2
> [   13.183258] omapdss_venc 48050c00.encoder: Linked as a consumer to
> regulator.7
> [   13.205535] Console: switching to colour frame buffer device 100x30
> [   13.291076] omapfb omapfb: using display 'lcd' mode 800x480
> [   13.661804] cpu cpu0: Linked as a consumer to regulator.6
> [   13.668945] cpu cpu0: Dropping the link to regulator.6
> [   13.676269] cpu cpu0: Linked as a consumer to regulator.6
> [   13.685058] omap_gpio 49058000.gpio: Could not set line 0 debounce to
> 200000 microseconds (-22)
> [   13.692199] omap_hsmmc 4809c000.mmc: Got CD GPIO
> [   13.699615] omap_hsmmc 4809c000.mmc: Linked as a consumer to regulator.12
> [   13.706542] omap_hsmmc 4809c000.mmc: Linked as a consumer to regulator.1
> [   13.864776] omap_hsmmc 480b4000.mmc: Linked as a consumer to regulator.4
> [   13.890441] omap_hsmmc 480b4000.mmc: Linked as a consumer to regulator.19
> [   14.011383] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to
> 2000-01-01T00:00:10 UTC (946684810)
> [   14.037658] smartreflex 480cb000.smartreflex: omap_sr_probe:
> SmartReflex driver initialized
> [   14.045013] smartreflex 480c9000.smartreflex: omap_sr_probe:
> SmartReflex driver initialized
> [   14.071289] VCSI: disabling
> [   14.102355] mmc0: host does not support reading read-only switch,
> assuming write-enable
> [   14.119567] mmc0: new high speed SDHC card at address aaaa
> [   14.131958] VDAC: disabling
> [   14.148376] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
> [   14.161926] mmc1: switch to bus width 8 failed
> [   14.175750] mmc1: switch to bus width 4 failed
> [   14.181823]  mmcblk0: p1 p2
> [   14.188018] mmc1: new high speed MMC card at address 0001
> [   14.197631] mmcblk1: mmc1:0001 MMC32G 29.8 GiB
> [   14.203582] ALSA device list:
> [   14.209289]   No soundcards found.
> [   14.216796] mmcblk1boot0: mmc1:0001 MMC32G partition 1 512 KiB
> [   14.224304] mmcblk1boot1: mmc1:0001 MMC32G partition 2 512 KiB
> [   14.232025]  mmcblk1: p1 p2 p3
> [   14.274627] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
> mode. Opts: (null)
> [   14.279998] VFS: Mounted root (ext4 filesystem) on device 179:2.
> [   14.297088] devtmpfs: mounted
> [   14.306671] Freeing unused kernel memory: 1024K
> [   14.312835] Run /sbin/init as init process
> [   21.703887] udevd[664]: starting version 3.2.2
> [   21.752258] random: udevd: uninitialized urandom read (16 bytes read)
> [   21.761779] random: udevd: uninitialized urandom read (16 bytes read)
> [   21.773956] random: udevd: uninitialized urandom read (16 bytes read)
> [   22.068450] udevd[665]: starting eudev-3.2.2
> [   22.481353] ti-soc-thermal 48002524.bandgap: This OMAP thermal sensor
> is unreliable. You've been warned
> [   22.539520] ti-soc-thermal 48002524.bandgap: Non-trimmed BGAP, Temp
> not accurate
> [   22.924926] omap_ssi 48058000.ssi-controller: ssi controller 0
> initialized (1 ports)!
> [   22.989501] lis3lv02d_i2c 3-001d: Linked as a consumer to regulator.2
> [   23.064086] omap_ssi_port 4805a000.ssi-port: ssi port 0 successfully
> initialized
> [   23.069732] lis3lv02d_i2c 3-001d: Linked as a consumer to regulator.8
> [   23.142425] input: twl4030:vibrator as
> /devices/platform/68000000.ocp/48070000.i2c/i2c-1/1-0048/48070000.i2c:twl@48:audio/twl4030-vibra/input/input2
> [   23.154266] lis3lv02d: 8 bits sensor found
> [   23.271240] input: ST LIS3LV02DL Accelerometer as
> /devices/platform/lis3lv02d/input/input3
> [   23.675292] power_supply bq27200-0: Not all required supplies found,
> defer probe
> [   23.702728] tsl2563 2-0029: model 7, rev. 0
> [   23.715972] media: Linux media interface: v0.10
> [   23.811065] bq27xxx-battery 2-0055: failed to register battery
> [   23.855712] tsc2005 spi0.0: Linked as a consumer to regulator.8
> [   23.907867] input: TSC2005 touchscreen as
> /devices/platform/68000000.ocp/48098000.spi/spi_master/spi0/spi0.0/input/input4
> [   23.991668] videodev: Linux video capture interface: v2.00
> [   24.027893] power_supply bq27200-0: bq27200-0: Found supply : bq24150a-0
> [   24.148590] random: crng init done
> [   24.155151] random: 2 urandom warning(s) missed due to ratelimiting
> [   24.420288] si4713 2-0063: Linked as a consumer to regulator.2
> [   24.498260] si4713 2-0063: Linked as a consumer to regulator.8
> [   24.547149] cfg80211: Loading compiled-in X.509 certificates for
> regulatory database
> [   24.731201] omap3isp 480bc000.isp: ignoring dependency for device,
> assuming no driver
> [   24.738342] omap3isp 480bc000.isp: parsing endpoint
> /ocp@68000000/isp@480bc000/ports/port@1/endpoint, interface 1
> [   24.738372] omap3isp 480bc000.isp: CSI-1/CCP-2 configuration
> [   24.738372] omap3isp 480bc000.isp: clock lane polarity 0, pos 1
> [   24.738403] omap3isp 480bc000.isp: data lane polarity 0, pos 0
> [   24.738464] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy1
> not found, using dummy regulator
> [   24.800781] omap_i2c 48072000.i2c: controller timed out
> [   24.809997] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> [   24.833770] bq2415x-charger 2-006b: automode supported, waiting for
> events
> [   24.859039] bq2415x-charger 2-006b: driver registered
> [   24.866424] platform regulatory.0: Direct firmware load for
> regulatory.db failed with error -2
> [   24.902069] platform regulatory.0: Falling back to syfs fallback for:
> regulatory.db
> [   24.928802] omap3isp 480bc000.isp: Linked as a consumer to regulator.0
> [   24.946075] si4713 2-0063: chip found @ 0xc6 (OMAP I2C adapter)
> [   24.997772] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy2
> not found, using dummy regulator
> [   25.117736] omap3isp 480bc000.isp: Revision 2.0 found
> [   25.150817] lp5523x 2-0032: lp5523 Programmable led chip found
> [   25.168640] omap-iommu 480bd400.mmu: 480bd400.mmu: version 1.1
> [   25.204071] isp1704_charger isp1707: init gpio 67
> [   25.221405] omap3isp 480bc000.isp: Linked as a consumer to regulator.3
> [   25.227905] omap3isp 480bc000.isp: hist: using DMA channel dma0chan10
> [   25.227966] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
> CCP2 was not initialized!
> [   25.251342] isp1704_charger isp1707: registered with product id isp1707
> [   25.308929] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
> CSI2a was not initialized!
> [   25.356964] input: gpio_keys as /devices/platform/gpio_keys/input/input5
> [   25.364501] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
> CCDC was not initialized!
> [   25.409423] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
> preview was not initialized!
> [   25.453552] rc rc0: Unspecified device as
> /devices/platform/n900-ir/rc/rc0
> [   25.497741] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
> resizer was not initialized!
> [   25.568054] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
> AEWB was not initialized!
> [   25.574859] smc91x: not found (-19).
> [   25.631713] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
> AF was not initialized!
> [   25.638366] omap3isp 480bc000.isp: Entity type for entity OMAP3 ISP
> histogram was not initialized!
> [   26.078918] HSI/SSI char device loaded
> [   26.257537] mousedev: PS/2 mouse device common for all mice
> [   26.295654] cfg80211: failed to load regulatory.db
> [   26.380493] wl1251 spi3.0: Linked as a consumer to regulator.8
> [   26.403289] radio-si4713 radio-si4713: New device successfully probed
> [   26.464630] wl1251: WARNING MAC address in eeprom or nvs data is not
> valid
> [   26.464660] wl1251: WARNING Setting random MAC address: 00:1f:df:05:29:05
> [   26.686614] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
> [   26.687866] wl1251: loaded
> [   26.711761] wl1251: initialized
> [   27.715240] wl1251 spi3.0: EOW timed out
> [   27.732025] wl1251 spi3.0: EOW timed out
> [   27.746063] wl1251 spi3.0: EOW timed out
> [   27.760833] wl1251 spi3.0: EOW timed out
> [   27.770843] wl1251 spi3.0: EOW timed out
> [   27.780242] wl1251 spi3.0: EOW timed out
> [   27.798156] wl1251 spi3.0: EOW timed out
> [   27.807128] wl1251 spi3.0: EOW timed out
> [   27.822204] wl1251 spi3.0: EOW timed out
> [   27.837829] wl1251 spi3.0: EOW timed out
> [   27.843841] wl1251 spi3.0: EOW timed out
> [   27.852020] wl1251 spi3.0: EOW timed out
> [   27.861511] wl1251 spi3.0: EOW timed out
> [   27.870788] wl1251 spi3.0: EOW timed out
> [   27.879028] wl1251 spi3.0: EOW timed out
> [   27.885345] wl1251 spi3.0: EOW timed out
> [   27.891479] wl1251 spi3.0: EOW timed out
> [   27.910034] wl1251 spi3.0: EOW timed out
> [   27.916351] wl1251 spi3.0: EOW timed out
> [   27.923980] wl1251 spi3.0: EOW timed out
> [   27.939575] wl1251 spi3.0: EOW timed out
> [   27.948028] wl1251 spi3.0: EOW timed out
> [   27.951934] wl1251 spi3.0: EOW timed out
> [   27.958038] wl1251 spi3.0: EOW timed out
> [   27.962341] wl1251 spi3.0: EOW timed out
> [   27.965789] wl1251 spi3.0: EOW timed out
> [   27.968627] wl1251 spi3.0: EOW timed out
> [   27.972442] wl1251 spi3.0: EOW timed out
> [   27.980834] wl1251 spi3.0: EOW timed out
> [   27.992126] wl1251 spi3.0: EOW timed out
> [   27.994567] wl1251 spi3.0: EOW timed out
> [   27.996612] wl1251 spi3.0: EOW timed out
> [   27.998870] wl1251 spi3.0: EOW timed out
> [   28.000976] wl1251 spi3.0: EOW timed out
> [   28.003570] wl1251 spi3.0: EOW timed out
> [   28.007049] wl1251 spi3.0: EOW timed out
> [   28.009216] wl1251 spi3.0: EOW timed out
> [   28.018859] wl1251 spi3.0: EOW timed out
> [   28.028411] wl1251 spi3.0: EOW timed out
> [   28.030731] wl1251 spi3.0: EOW timed out
> [   28.032775] wl1251 spi3.0: EOW timed out
> [   28.037994] wl1251 spi3.0: EOW timed out
> [   28.040191] wl1251 spi3.0: EOW timed out
> [   28.042358] wl1251 spi3.0: EOW timed out
> [   28.044433] wl1251 spi3.0: EOW timed out
> [   28.046447] wl1251 spi3.0: EOW timed out
> [   28.048461] wl1251 spi3.0: EOW timed out
> [   28.050476] wl1251 spi3.0: EOW timed out
> [   28.052856] wl1251 spi3.0: EOW timed out
> [   28.054870] wl1251 spi3.0: EOW timed out
> [   28.056854] wl1251 spi3.0: EOW timed out
> [   28.058868] wl1251 spi3.0: EOW timed out
> [   28.068420] wl1251 spi3.0: EOW timed out
> [   28.071899] wl1251 spi3.0: EOW timed out
> [   28.079223] wl1251 spi3.0: EOW timed out
> [   28.081481] wl1251 spi3.0: EOW timed out
> [   28.084167] wl1251 spi3.0: EOW timed out
> [   28.086273] wl1251 spi3.0: EOW timed out
> [   28.088287] wl1251 spi3.0: EOW timed out
> [   28.090301] wl1251 spi3.0: EOW timed out
> [   28.092590] wl1251 spi3.0: EOW timed out
> [   28.094635] wl1251 spi3.0: EOW timed out
> [   28.096618] wl1251 spi3.0: EOW timed out
> [   28.100860] wl1251 spi3.0: EOW timed out
> [   28.110656] wl1251 spi3.0: EOW timed out
> [   28.112854] wl1251 spi3.0: EOW timed out
> [   28.114868] wl1251 spi3.0: EOW timed out
> [   28.119171] wl1251 spi3.0: EOW timed out
> [   28.121337] wl1251 spi3.0: EOW timed out
> [   28.123474] wl1251 spi3.0: EOW timed out
> [   28.128326] wl1251 spi3.0: EOW timed out
> [   28.130523] wl1251 spi3.0: EOW timed out
> [   28.132873] wl1251 spi3.0: EOW timed out
> [   28.134857] wl1251 spi3.0: EOW timed out
> [   28.136840] wl1251 spi3.0: EOW timed out
> [   28.138824] wl1251 spi3.0: EOW timed out
> [   28.141021] wl1251 spi3.0: EOW timed out
> [   28.143035] wl1251 spi3.0: EOW timed out
> [   28.145050] wl1251 spi3.0: EOW timed out
> [   28.147033] wl1251 spi3.0: EOW timed out
> [   28.148986] wl1251 spi3.0: EOW timed out
> [   28.158477] wl1251 spi3.0: EOW timed out
> [   28.162017] wl1251 spi3.0: EOW timed out
> [   28.168945] wl1251 spi3.0: EOW timed out
> [   28.171173] wl1251 spi3.0: EOW timed out
> [   28.173858] wl1251 spi3.0: EOW timed out
> [   28.175964] wl1251 spi3.0: EOW timed out
> [   28.177947] wl1251 spi3.0: EOW timed out
> [   28.179962] wl1251 spi3.0: EOW timed out
> [   28.182250] wl1251 spi3.0: EOW timed out
> [   28.184265] wl1251 spi3.0: EOW timed out
> [   28.186248] wl1251 spi3.0: EOW timed out
> [   28.190887] wl1251 spi3.0: EOW timed out
> [   28.200408] wl1251 spi3.0: EOW timed out
> [   28.202758] wl1251 spi3.0: EOW timed out
> [   28.204833] wl1251 spi3.0: EOW timed out
> [   28.208435] wl1251 spi3.0: EOW timed out
> [   28.210662] wl1251 spi3.0: EOW timed out
> [   28.212799] wl1251 spi3.0: EOW timed out
> [   28.217620] wl1251 spi3.0: EOW timed out
> [   28.219818] wl1251 spi3.0: EOW timed out
> [   28.222167] wl1251 spi3.0: EOW timed out
> [   28.224212] wl1251 spi3.0: EOW timed out
> [   28.226196] wl1251 spi3.0: EOW timed out
> [   28.228149] wl1251 spi3.0: EOW timed out
> [   28.230133] wl1251 spi3.0: EOW timed out
> [   28.232391] wl1251 spi3.0: EOW timed out
> [   28.234405] wl1251 spi3.0: EOW timed out
> [   28.236419] wl1251 spi3.0: EOW timed out
> [   28.240844] wl1251 spi3.0: EOW timed out
> [   28.251037] wl1251 spi3.0: EOW timed out
> [   28.253143] wl1251 spi3.0: EOW timed out
> [   28.255218] wl1251 spi3.0: EOW timed out
> [   28.259918] wl1251 spi3.0: EOW timed out
> [   28.263000] wl1251 spi3.0: EOW timed out
> [   28.265930] wl1251 spi3.0: EOW timed out
> [   28.267974] wl1251 spi3.0: EOW timed out
> [   28.269989] wl1251 spi3.0: EOW timed out
> [   28.272338] wl1251 spi3.0: EOW timed out
> [   28.274353] wl1251 spi3.0: EOW timed out
> [   28.276336] wl1251 spi3.0: EOW timed out
> [   28.280914] wl1251 spi3.0: EOW timed out
> [   28.290649] wl1251 spi3.0: EOW timed out
> [   28.292785] wl1251 spi3.0: EOW timed out
> [   28.294799] wl1251 spi3.0: EOW timed out
> [   28.296813] wl1251 spi3.0: EOW timed out
> [   28.300384] wl1251 spi3.0: EOW timed out
> [   28.302764] wl1251 spi3.0: EOW timed out
> [   28.310791] wl1251 spi3.0: EOW timed out
> [   28.312927] wl1251 spi3.0: EOW timed out
> [   28.314971] wl1251 spi3.0: EOW timed out
> [   28.316986] wl1251 spi3.0: EOW timed out
> [   28.318969] wl1251 spi3.0: EOW timed out
> [   28.321105] wl1251 spi3.0: EOW timed out
> [   28.326293] wl1251 spi3.0: EOW timed out
> [   28.330749] wl1251 spi3.0: EOW timed out
> [   28.332946] wl1251 spi3.0: EOW timed out
> [   28.334930] wl1251 spi3.0: EOW timed out
> [   28.339508] wl1251 spi3.0: EOW timed out
> [   28.341613] wl1251 spi3.0: EOW timed out
> [   28.343597] wl1251 spi3.0: EOW timed out
> [   28.345550] wl1251 spi3.0: EOW timed out
> [   28.347656] wl1251 spi3.0: EOW timed out
> [   28.349639] wl1251 spi3.0: EOW timed out
> [   28.351623] wl1251 spi3.0: EOW timed out
> [   28.353729] wl1251 spi3.0: EOW timed out
> [   28.360046] wl1251 spi3.0: EOW timed out
> [   28.363281] wl1251 spi3.0: EOW timed out
> [   28.365356] wl1251 spi3.0: EOW timed out
> [   28.368377] wl1251 spi3.0: EOW timed out
> [   28.370758] wl1251 spi3.0: EOW timed out
> [   28.375091] wl1251 spi3.0: EOW timed out
> [   28.377197] wl1251 spi3.0: EOW timed out
> [   28.380950] wl1251 spi3.0: EOW timed out
> [   28.383026] wl1251 spi3.0: EOW timed out
> [   28.385040] wl1251 spi3.0: EOW timed out
> [   28.387054] wl1251 spi3.0: EOW timed out
> [   28.390869] wl1251 spi3.0: EOW timed out
> [   28.393920] wl1251 spi3.0: EOW timed out
> [   28.396026] wl1251 spi3.0: EOW timed out
> [   28.398010] wl1251 spi3.0: EOW timed out
> [   28.399993] wl1251 spi3.0: EOW timed out
> [   28.402282] wl1251 spi3.0: EOW timed out
> [   28.404296] wl1251 spi3.0: EOW timed out
> [   28.406280] wl1251 spi3.0: EOW timed out
> [   28.408233] wl1251 spi3.0: EOW timed out
> [   28.413665] wl1251 spi3.0: EOW timed out
> [   28.415771] wl1251 spi3.0: EOW timed out
> [   28.417785] wl1251 spi3.0: EOW timed out
> [   28.420867] wl1251 spi3.0: EOW timed out
> [   28.422943] wl1251 spi3.0: EOW timed out
> [   28.425140] wl1251 spi3.0: EOW timed out
> [   28.427917] wl1251 spi3.0: EOW timed out
> [   28.430053] wl1251 spi3.0: EOW timed out
> [   28.435485] wl1251 spi3.0: EOW timed out
> [   28.438812] wl1251 spi3.0: EOW timed out
> [   28.441009] wl1251 spi3.0: EOW timed out
> [   28.443054] wl1251 spi3.0: EOW timed out
> [   28.445068] wl1251 spi3.0: EOW timed out
> [   28.447113] wl1251 spi3.0: EOW timed out
> [   28.449127] wl1251 spi3.0: EOW timed out
> [   28.451293] wl1251 spi3.0: EOW timed out
> [   28.455139] wl1251 spi3.0: EOW timed out
> [   28.457183] wl1251 spi3.0: EOW timed out
> [   28.461822] wl1251 spi3.0: EOW timed out
> [   28.475524] wl1251 spi3.0: EOW timed out
> [   28.477691] wl1251 spi3.0: EOW timed out
> [   28.480316] wl1251 spi3.0: EOW timed out
> [   28.482757] wl1251 spi3.0: EOW timed out
> [   28.489959] wl1251 spi3.0: EOW timed out
> [   28.500885] wl1251 spi3.0: EOW timed out
> [   28.503021] wl1251 spi3.0: EOW timed out
> [   28.505035] wl1251 spi3.0: EOW timed out
> [   28.507049] wl1251 spi3.0: EOW timed out
> [   28.509063] wl1251 spi3.0: EOW timed out
> [   28.511077] wl1251 spi3.0: EOW timed out
> [   28.518280] wl1251 spi3.0: EOW timed out
> [   28.520416] wl1251 spi3.0: EOW timed out
> [   28.527008] wl1251 spi3.0: EOW timed out
> [   28.530853] wl1251 spi3.0: EOW timed out
> [   28.532928] wl1251 spi3.0: EOW timed out
> [   28.534973] wl1251 spi3.0: EOW timed out
> [   28.536987] wl1251 spi3.0: EOW timed out
> [   28.539245] wl1251 spi3.0: EOW timed out
> [   28.541717] wl1251 spi3.0: EOW timed out
> [   28.544403] wl1251 spi3.0: EOW timed out
> [   28.546478] wl1251 spi3.0: EOW timed out
> [   28.548461] wl1251 spi3.0: EOW timed out
> [   28.551055] wl1251 spi3.0: EOW timed out
> [   28.553741] wl1251 spi3.0: EOW timed out
> [   28.555999] wl1251 spi3.0: EOW timed out
> [   28.560791] wl1251 spi3.0: EOW timed out
> [   28.567291] wl1251 spi3.0: EOW timed out
> [   28.569458] wl1251 spi3.0: EOW timed out
> [   28.572326] wl1251 spi3.0: EOW timed out
> [   28.574493] wl1251 spi3.0: EOW timed out
> [   28.576568] wl1251 spi3.0: EOW timed out
> [   28.580810] wl1251 spi3.0: EOW timed out
> [   28.583007] wl1251 spi3.0: EOW timed out
> [   28.585144] wl1251 spi3.0: EOW timed out
> [   28.587310] wl1251 spi3.0: EOW timed out
> [   28.590301] wl1251 spi3.0: EOW timed out
> [   28.592712] wl1251 spi3.0: EOW timed out
> [   28.596343] wl1251 spi3.0: EOW timed out
> [   28.598541] wl1251 spi3.0: EOW timed out
> [   28.601104] wl1251 spi3.0: EOW timed out
> [   28.604766] wl1251 spi3.0: EOW timed out
> [   28.610900] wl1251 spi3.0: EOW timed out
> [   28.613647] wl1251 spi3.0: EOW timed out
> [   28.615783] wl1251 spi3.0: EOW timed out
> [   28.617919] wl1251 spi3.0: EOW timed out
> [   28.619995] wl1251 spi3.0: EOW timed out
> [   28.626007] wl1251 spi3.0: EOW timed out
> [   28.628265] wl1251 spi3.0: EOW timed out
> [   28.631347] wl1251 spi3.0: EOW timed out
> [   28.640258] wl1251 spi3.0: EOW timed out
> [   28.642669] wl1251 spi3.0: EOW timed out
> [   28.648529] wl1251 spi3.0: EOW timed out
> [   28.652038] wl1251 spi3.0: EOW timed out
> [   28.654235] wl1251 spi3.0: EOW timed out
> [   28.656311] wl1251 spi3.0: EOW timed out
> [   28.658447] wl1251 spi3.0: EOW timed out
> [   28.661193] wl1251 spi3.0: EOW timed out
> [   28.663269] wl1251 spi3.0: EOW timed out
> [   28.670135] wl1251 spi3.0: EOW timed out
> [   28.672851] wl1251 spi3.0: EOW timed out
> [   28.674926] wl1251 spi3.0: EOW timed out
> [   28.677154] wl1251 spi3.0: EOW timed out
> [   28.679199] wl1251 spi3.0: EOW timed out
> [   28.682281] wl1251 spi3.0: EOW timed out
> [   28.690948] wl1251 spi3.0: EOW timed out
> [   28.693084] wl1251 spi3.0: EOW timed out
> [   28.695098] wl1251 spi3.0: EOW timed out
> [   28.697113] wl1251 spi3.0: EOW timed out
> [   28.699127] wl1251 spi3.0: EOW timed out
> [   28.701080] wl1251 spi3.0: EOW timed out
> [   28.709564] wl1251 spi3.0: EOW timed out
> [   28.720886] wl1251 spi3.0: EOW timed out
> [   28.723052] wl1251 spi3.0: EOW timed out
> [   28.725219] wl1251 spi3.0: EOW timed out
> [   28.727386] wl1251 spi3.0: EOW timed out
> [   28.729370] wl1251 spi3.0: EOW timed out
> [   28.737426] wl1251 spi3.0: EOW timed out
> [   28.739654] wl1251 spi3.0: EOW timed out
> [   28.750823] wl1251 spi3.0: EOW timed out
> [   28.752990] wl1251 spi3.0: EOW timed out
> [   28.755004] wl1251 spi3.0: EOW timed out
> [   28.757049] wl1251 spi3.0: EOW timed out
> [   28.759063] wl1251 spi3.0: EOW timed out
> [   28.760955] wl1251 spi3.0: EOW timed out
> [   28.770782] wl1251 spi3.0: EOW timed out
> [   28.772857] wl1251 spi3.0: EOW timed out
> [   28.774841] wl1251 spi3.0: EOW timed out
> [   28.776855] wl1251 spi3.0: EOW timed out
> [   28.778747] wl1251 spi3.0: EOW timed out
> [   28.780761] wl1251 spi3.0: EOW timed out
> [   28.790832] wl1251 spi3.0: EOW timed out
> [   28.792785] wl1251 spi3.0: EOW timed out
> [   28.794891] wl1251 spi3.0: EOW timed out
> [   28.796783] wl1251 spi3.0: EOW timed out
> [   28.798706] wl1251 spi3.0: EOW timed out
> [   28.800659] wl1251 spi3.0: EOW timed out
> [   28.802581] wl1251 spi3.0: EOW timed out
> [   28.810668] wl1251 spi3.0: EOW timed out
> [   28.812774] wl1251 spi3.0: EOW timed out
> [   28.814697] wl1251 spi3.0: EOW timed out
> [   28.816589] wl1251 spi3.0: EOW timed out
> [   28.818695] wl1251 spi3.0: EOW timed out
> [   28.820739] wl1251 spi3.0: EOW timed out
> [   28.822723] wl1251 spi3.0: EOW timed out
> [   28.829986] wl1251 spi3.0: EOW timed out
> [   28.832183] wl1251 spi3.0: EOW timed out
> [   28.834197] wl1251 spi3.0: EOW timed out
> [   28.836181] wl1251 spi3.0: EOW timed out
> [   28.838989] wl1251 spi3.0: EOW timed out
> [   28.840637] wl1251 spi3.0: EOW timed out
> [   28.842285] wl1251 spi3.0: EOW timed out
> [   28.843872] wl1251 spi3.0: EOW timed out
> [   28.845428] wl1251 spi3.0: EOW timed out
> [   28.846984] wl1251 spi3.0: EOW timed out
> [   28.848541] wl1251 spi3.0: EOW timed out
> [   28.850097] wl1251 spi3.0: EOW timed out
> [   28.851715] wl1251 spi3.0: EOW timed out
> [   28.853393] wl1251 spi3.0: EOW timed out
> [   28.854980] wl1251 spi3.0: EOW timed out
> [   28.856536] wl1251 spi3.0: EOW timed out
> [   28.858093] wl1251 spi3.0: EOW timed out
> [   28.859649] wl1251 spi3.0: EOW timed out
> [   28.861267] wl1251 spi3.0: EOW timed out
> [   28.862854] wl1251 spi3.0: EOW timed out
> [   28.864410] wl1251 spi3.0: EOW timed out
> [   28.865966] wl1251 spi3.0: EOW timed out
> [   28.867523] wl1251 spi3.0: EOW timed out
> [   28.869079] wl1251 spi3.0: EOW timed out
> [   28.870666] wl1251 spi3.0: EOW timed out
> [   28.872222] wl1251 spi3.0: EOW timed out
> [   28.873779] wl1251 spi3.0: EOW timed out
> [   28.875335] wl1251 spi3.0: EOW timed out
> [   28.876892] wl1251 spi3.0: EOW timed out
> [   28.878448] wl1251 spi3.0: EOW timed out
> [   28.880004] wl1251 spi3.0: EOW timed out
> [   28.881591] wl1251 spi3.0: EOW timed out
> [   28.882904] wl1251 spi3.0: EOW timed out
> [   28.884185] wl1251 spi3.0: EOW timed out
> [   28.886138] wl1251 spi3.0: EOW timed out
> [   28.887237] wl1251 spi3.0: EOW timed out
> [   28.888610] wl1251 spi3.0: EOW timed out
> [   28.890930] wl1251 spi3.0: EOW timed out
> [   28.893127] wl1251 spi3.0: EOW timed out
> [   28.900115] wl1251 spi3.0: EOW timed out
> [   28.902679] wl1251 spi3.0: EOW timed out
> [   28.904907] wl1251 spi3.0: EOW timed out
> [   28.908081] wl1251 spi3.0: EOW timed out
> [   28.910400] wl1251 spi3.0: EOW timed out
> [   28.920837] wl1251 spi3.0: EOW timed out
> [   28.923187] wl1251 spi3.0: EOW timed out
> [   28.925476] wl1251 spi3.0: EOW timed out
> [   28.927703] wl1251 spi3.0: EOW timed out
> [   28.930053] wl1251 spi3.0: EOW timed out
> [   28.940856] wl1251 spi3.0: EOW timed out
> [   28.943176] wl1251 spi3.0: EOW timed out
> [   28.945373] wl1251 spi3.0: EOW timed out
> [   28.947540] wl1251 spi3.0: EOW timed out
> [   28.949768] wl1251 spi3.0: EOW timed out
> [   28.952270] wl1251 spi3.0: EOW timed out
> [   28.955810] wl1251 spi3.0: EOW timed out
> [   28.958099] wl1251 spi3.0: EOW timed out
> [   28.960357] wl1251 spi3.0: EOW timed out
> [   28.963195] wl1251 spi3.0: EOW timed out
> [   28.970886] wl1251 spi3.0: EOW timed out
> [   28.973205] wl1251 spi3.0: EOW timed out
> [   28.975433] wl1251 spi3.0: EOW timed out
> [   28.977508] wl1251 spi3.0: EOW timed out
> [   28.979797] wl1251 spi3.0: EOW timed out
> [   28.989746] wl1251 spi3.0: EOW timed out
> [   28.992156] wl1251 spi3.0: EOW timed out
> [   28.994201] wl1251 spi3.0: EOW timed out
> [   28.996246] wl1251 spi3.0: EOW timed out
> [   29.000152] wl1251 spi3.0: EOW timed out
> [   29.002441] wl1251 spi3.0: EOW timed out
> [   29.008361] wl1251 spi3.0: EOW timed out
> [   29.010467] wl1251 spi3.0: EOW timed out
> [   29.012786] wl1251 spi3.0: EOW timed out
> [   29.014801] wl1251 spi3.0: EOW timed out
> [   29.020172] wl1251 spi3.0: EOW timed out
> [   29.024658] wl1251 spi3.0: EOW timed out
> [   29.026763] wl1251 spi3.0: EOW timed out
> [   29.028778] wl1251 spi3.0: EOW timed out
> [   29.030914] wl1251 spi3.0: EOW timed out
> [   29.032958] wl1251 spi3.0: EOW timed out
> [   29.036651] wl1251 spi3.0: EOW timed out
> [   29.039001] wl1251 spi3.0: EOW timed out
> [   29.041229] wl1251 spi3.0: EOW timed out
> [   29.043884] wl1251 spi3.0: EOW timed out
> [   29.045989] wl1251 spi3.0: EOW timed out
> [   29.048004] wl1251 spi3.0: EOW timed out
> [   29.050231] wl1251 spi3.0: EOW timed out
> [   29.063598] wl1251 spi3.0: EOW timed out
> [   29.070861] wl1251 spi3.0: EOW timed out
> [   29.072174] wl1251: ERROR chip id doesn't match after firmware boot
> [   30.585205] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
> [   38.298400] SSI protocol aka McSAAB added
> [   38.427978] CMT speech driver added
> [   38.506958] nokia-modem n900-modem: Registered Nokia HSI modem
> [   42.001647] SGX clock rate 110 MHz
> [   45.676727] NET: Registered protocol family 10
> [   45.711944] Segment Routing with IPv6
> [   53.900360] using random self ethernet address
> [   53.912231] using random host ethernet address
> [   53.943572] usb0: HOST MAC 8e:81:2f:99:ec:36
> [   53.956573] usb0: MAC f2:99:b7:97:ba:31
> [   54.373260] configfs-gadget gadget: high-speed config #1: The only one
> [   54.563568] using random self ethernet address
> [   54.568939] using random host ethernet address
> [   54.612243] usb0: HOST MAC 6e:95:7f:5f:6f:45
> [   54.617523] usb0: MAC b6:a9:66:15:5a:1d
> [   55.059234] configfs-gadget gadget: high-speed config #1: The only one
> [   55.066650] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
> [   59.141021] Bluetooth: Core ver 2.22
> [   59.144165] NET: Registered protocol family 31
> [   59.144195] Bluetooth: HCI device and connection manager initialized
> [   59.144256] Bluetooth: HCI socket layer initialized
> [   59.144287] Bluetooth: L2CAP socket layer initialized
> [   59.144317] Bluetooth: SCO socket layer initialized
> [   59.277160] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [   59.277191] Bluetooth: BNEP filters: protocol multicast
> [   59.277252] Bluetooth: BNEP socket layer initialized
> 



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2019-03-10  0:51 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-09 23:22 Nokia N900: wl1251 spi3.0: EOW timed out on Merlijn Wajer
2019-03-10  0:53 ` Merlijn Wajer [this message]
2019-03-10  4:16   ` Vignesh Raghavendra
2019-03-10 19:23     ` Merlijn Wajer
2019-03-11  7:21       ` Vignesh Raghavendra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=436a9a35-539a-3fe8-2225-36b45c7e5412@wizzup.org \
    --to=merlijn@wizzup.org \
    --cc=broonie@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=sre@kernel.org \
    --cc=tony@atomide.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).