linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Gonzalez <marc.w.gonzalez@free.fr>
To: MSM <linux-arm-msm@vger.kernel.org>, SCSI <linux-scsi@vger.kernel.org>
Cc: Jeffrey Hugo <jhugo@codeaurora.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Andy Gross <andy.gross@linaro.org>,
	David Brown <david.brown@linaro.org>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Avri Altman <avri.altman@wdc.com>,
	Pedro Sousa <pedrom.sousa@synopsys.com>,
	LKML <linux-kernel@vger.kernel.org>,
	Lee Jones <lee.jones@linaro.org>
Subject: [PATCH v5 0/3] UFS on APQ8098/MSM8998
Date: Mon, 25 Feb 2019 13:16:27 +0100	[thread overview]
Message-ID: <43768d77-80b7-9cdc-b6e0-08ec4a026c21@free.fr> (raw)

Hello,

This series adds support for the UFS host controller on APQ8098/MSM8998-based boards.

This should be the final rev ;-)

Differences between v4 and v5:
- Drop patches that have already been accepted or spun off

Differences between v3 and v4:
- Rebase on top of -next
- Pick up Douglas Anderson's UFSHC doc fix
- Document 8998 UFSHC binding
- Improve UFS PHY binding doc
- Put the UFS DT patch at the end of the series

Difference between v2 and v3:
- Add qcom,msm8998-qmp-ufs-phy compat string and match it in the PHY driver
- Drop vdd-hba-fixed-regulator
- Write the reg addresses with full 32-bit width
- Set regulator-allow-set-load only on the 3 rails used by UFS.
- Revert the patch introducing ufshcd_set_vccq_rail_unused

Difference between v1 and v2:
- New patch to add 'regulator-allow-set-load' prop to all vreg nodes
- Rename rpmcc node to 'clock-controller' + Add Review tags
- Drop UFS pinctrl gymnastics (not required, probably left enabled in bootloader)
- Delete GCC_UFS_ICE_CORE_CLK (ICE not used upstream, I think)
- Fix sizes of ufsphy register areas based on Jeffrey's feedback
- Hack ufshcd_set_vccq_rail_unused into a NOP to work around lock up + reboot


Marc Gonzalez (3):
  dt-bindings: ufs: Add msm8998 compatible string
  arm64: dts: qcom: msm8998: Allow UFSHC driver to set-load
  arm64: dts: qcom: msm8998: Add UFS nodes

 .../devicetree/bindings/ufs/ufshcd-pltfrm.txt |  1 +
 arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi     | 22 +++++++
 arch/arm64/boot/dts/qcom/msm8998.dtsi         | 65 +++++++++++++++++++
 3 files changed, 88 insertions(+)

-- 
2.17.1

             reply	other threads:[~2019-02-25 12:19 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-25 12:16 Marc Gonzalez [this message]
2019-02-25 12:17 ` [PATCH v5 1/3] dt-bindings: ufs: Add msm8998 compatible string Marc Gonzalez
2019-02-25 12:17 ` [PATCH v5 2/3] arm64: dts: qcom: msm8998: Allow UFSHC driver to set-load Marc Gonzalez
2019-02-25 12:18 ` [PATCH v5 3/3] arm64: dts: qcom: msm8998: Add UFS nodes Marc Gonzalez
2019-02-26  8:22 ` [PATCH v5 0/3] UFS on APQ8098/MSM8998t Lee Jones
2019-03-25 12:05 ` [PATCH v5 0/3] UFS on APQ8098/MSM8998 Marc Gonzalez
2019-03-27  6:16 ` Bjorn Andersson
2019-03-28  9:37 ` Sibi Sankar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=43768d77-80b7-9cdc-b6e0-08ec4a026c21@free.fr \
    --to=marc.w.gonzalez@free.fr \
    --cc=alim.akhtar@samsung.com \
    --cc=andy.gross@linaro.org \
    --cc=avri.altman@wdc.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=jhugo@codeaurora.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=pedrom.sousa@synopsys.com \
    --subject='Re: [PATCH v5 0/3] UFS on APQ8098/MSM8998' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).