linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v6 0/3] KVM: x86: Enable user wait instructions
@ 2019-06-21  5:57 Tao Xu
  2019-06-21  5:57 ` [PATCH v6 1/3] KVM: x86: add support for " Tao Xu
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Tao Xu @ 2019-06-21  5:57 UTC (permalink / raw)
  To: pbonzini, rkrcmar, corbet, tglx, mingo, bp, hpa, sean.j.christopherson
  Cc: kvm, linux-kernel, fenghua.yu, xiaoyao.li, jingqi.liu, tao3.xu

UMONITOR, UMWAIT and TPAUSE are a set of user wait instructions.

UMONITOR arms address monitoring hardware using an address. A store
to an address within the specified address range triggers the
monitoring hardware to wake up the processor waiting in umwait.

UMWAIT instructs the processor to enter an implementation-dependent
optimized state while monitoring a range of addresses. The optimized
state may be either a light-weight power/performance optimized state
(c0.1 state) or an improved power/performance optimized state
(c0.2 state).

TPAUSE instructs the processor to enter an implementation-dependent
optimized state c0.1 or c0.2 state and wake up when time-stamp counter
reaches specified timeout.

Availability of the user wait instructions is indicated by the presence
of the CPUID feature flag WAITPKG CPUID.0x07.0x0:ECX[5].

The patches enable the umonitor, umwait and tpause features in KVM.
Because umwait and tpause can put a (psysical) CPU into a power saving
state, by default we dont't expose it to kvm and enable it only when
guest CPUID has it. If the instruction causes a delay, the amount
of time delayed is called here the physical delay. The physical delay is
first computed by determining the virtual delay (the time to delay
relative to the VM’s timestamp counter). 

The release document ref below link:
Intel 64 and IA-32 Architectures Software Developer's Manual,
https://software.intel.com/sites/default/files/\
managed/39/c5/325462-sdm-vol-1-2abcd-3abcd.pdf
This patch has a dependency on https://lkml.org/lkml/2019/6/19/972

Changelog:
v6:
	add check msr_info->host_initiated in get/set msr(Xiaoyao)
	restore the atomic_switch_umwait_control_msr()(Xiaoyao)
v5:
	remove vmx_waitpkg_supported() to fix guest can rdmsr or wrmsr
	when the feature is off (Xiaoyao)
	rebase the patch because the kernel dependcy patch updated to
	v5: https://lkml.org/lkml/2019/6/19/972
v4:
	Set msr of IA32_UMWAIT_CONTROL can be 0 and add the check of
	reserved bit 1 (Radim and Xiaoyao)
	Use umwait_control_cached directly and add the IA32_UMWAIT_CONTROL
	in msrs_to_save[] to support migration (Xiaoyao)
v3:
	Simplify the patches, expose user wait instructions when the
	guest has CPUID (Paolo)
	Use mwait_control_cached to avoid frequently rdmsr of
	IA32_UMWAIT_CONTROL (Paolo and Xiaoyao)
	Handle vm-exit for UMWAIT and TPAUSE as "never happen" (Paolo)
v2:
	Separated from the series https://lkml.org/lkml/2018/7/10/160
	Add provide a capability to enable UMONITOR, UMWAIT and TPAUSE 
v1:
	Sent out with MOVDIRI/MOVDIR64B instructions patches

Tao Xu (3):
  KVM: x86: add support for user wait instructions
  KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL
  KVM: vmx: handle vm-exit for UMWAIT and TPAUSE

 arch/x86/include/asm/vmx.h      |  1 +
 arch/x86/include/uapi/asm/vmx.h |  6 +++-
 arch/x86/kernel/cpu/umwait.c    |  3 +-
 arch/x86/kvm/cpuid.c            |  2 +-
 arch/x86/kvm/vmx/vmx.c          | 53 +++++++++++++++++++++++++++++++++
 arch/x86/kvm/vmx/vmx.h          |  3 ++
 arch/x86/kvm/x86.c              |  1 +
 7 files changed, 66 insertions(+), 3 deletions(-)

-- 
2.20.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v6 1/3] KVM: x86: add support for user wait instructions
  2019-06-21  5:57 [PATCH v6 0/3] KVM: x86: Enable user wait instructions Tao Xu
@ 2019-06-21  5:57 ` Tao Xu
  2019-06-21  5:57 ` [PATCH v6 2/3] KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL Tao Xu
  2019-06-21  5:57 ` [PATCH v6 3/3] KVM: vmx: handle vm-exit for UMWAIT and TPAUSE Tao Xu
  2 siblings, 0 replies; 7+ messages in thread
From: Tao Xu @ 2019-06-21  5:57 UTC (permalink / raw)
  To: pbonzini, rkrcmar, corbet, tglx, mingo, bp, hpa, sean.j.christopherson
  Cc: kvm, linux-kernel, fenghua.yu, xiaoyao.li, jingqi.liu, tao3.xu

UMONITOR, UMWAIT and TPAUSE are a set of user wait instructions.
This patch adds support for user wait instructions in KVM. Availability
of the user wait instructions is indicated by the presence of the CPUID
feature flag WAITPKG CPUID.0x07.0x0:ECX[5]. User wait instructions may
be executed at any privilege level, and use IA32_UMWAIT_CONTROL MSR to
set the maximum time.

The behavior of user wait instructions in VMX non-root operation is
determined first by the setting of the "enable user wait and pause"
secondary processor-based VM-execution control bit 26.
	If the VM-execution control is 0, UMONITOR/UMWAIT/TPAUSE cause
an invalid-opcode exception (#UD).
	If the VM-execution control is 1, treatment is based on the
setting of the “RDTSC exiting” VM-execution control. Because KVM never
enables RDTSC exiting, if the instruction causes a delay, the amount of
time delayed is called here the physical delay. The physical delay is
first computed by determining the virtual delay. If
IA32_UMWAIT_CONTROL[31:2] is zero, the virtual delay is the value in
EDX:EAX minus the value that RDTSC would return; if
IA32_UMWAIT_CONTROL[31:2] is not zero, the virtual delay is the minimum
of that difference and AND(IA32_UMWAIT_CONTROL,FFFFFFFCH).

Because umwait and tpause can put a (psysical) CPU into a power saving
state, by default we dont't expose it to kvm and enable it only when
guest CPUID has it.

Detailed information about user wait instructions can be found in the
latest Intel 64 and IA-32 Architectures Software Developer's Manual.

Reviewed-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Co-developed-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
---

No changes in v6
---
 arch/x86/include/asm/vmx.h | 1 +
 arch/x86/kvm/cpuid.c       | 2 +-
 arch/x86/kvm/vmx/vmx.c     | 4 ++++
 3 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index a39136b0d509..8f00882664d3 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -69,6 +69,7 @@
 #define SECONDARY_EXEC_PT_USE_GPA		0x01000000
 #define SECONDARY_EXEC_MODE_BASED_EPT_EXEC	0x00400000
 #define SECONDARY_EXEC_TSC_SCALING              0x02000000
+#define SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE	0x04000000
 
 #define PIN_BASED_EXT_INTR_MASK                 0x00000001
 #define PIN_BASED_NMI_EXITING                   0x00000008
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index e18a9f9f65b5..48bd851a6ae5 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -405,7 +405,7 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		F(AVX512VBMI) | F(LA57) | F(PKU) | 0 /*OSPKE*/ |
 		F(AVX512_VPOPCNTDQ) | F(UMIP) | F(AVX512_VBMI2) | F(GFNI) |
 		F(VAES) | F(VPCLMULQDQ) | F(AVX512_VNNI) | F(AVX512_BITALG) |
-		F(CLDEMOTE) | F(MOVDIRI) | F(MOVDIR64B);
+		F(CLDEMOTE) | F(MOVDIRI) | F(MOVDIR64B) | 0 /*WAITPKG*/;
 
 	/* cpuid 7.0.edx*/
 	const u32 kvm_cpuid_7_0_edx_x86_features =
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index b93e36ddee5e..b35bfac30a34 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -2250,6 +2250,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 			SECONDARY_EXEC_RDRAND_EXITING |
 			SECONDARY_EXEC_ENABLE_PML |
 			SECONDARY_EXEC_TSC_SCALING |
+			SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE |
 			SECONDARY_EXEC_PT_USE_GPA |
 			SECONDARY_EXEC_PT_CONCEAL_VMX |
 			SECONDARY_EXEC_ENABLE_VMFUNC |
@@ -3987,6 +3988,9 @@ static void vmx_compute_secondary_exec_control(struct vcpu_vmx *vmx)
 		}
 	}
 
+	if (!guest_cpuid_has(vcpu, X86_FEATURE_WAITPKG))
+		exec_control &= ~SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE;
+
 	vmx->secondary_exec_control = exec_control;
 }
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v6 2/3] KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL
  2019-06-21  5:57 [PATCH v6 0/3] KVM: x86: Enable user wait instructions Tao Xu
  2019-06-21  5:57 ` [PATCH v6 1/3] KVM: x86: add support for " Tao Xu
@ 2019-06-21  5:57 ` Tao Xu
  2019-07-03  0:32   ` Tao Xu
  2019-07-11 13:25   ` Paolo Bonzini
  2019-06-21  5:57 ` [PATCH v6 3/3] KVM: vmx: handle vm-exit for UMWAIT and TPAUSE Tao Xu
  2 siblings, 2 replies; 7+ messages in thread
From: Tao Xu @ 2019-06-21  5:57 UTC (permalink / raw)
  To: pbonzini, rkrcmar, corbet, tglx, mingo, bp, hpa, sean.j.christopherson
  Cc: kvm, linux-kernel, fenghua.yu, xiaoyao.li, jingqi.liu, tao3.xu

UMWAIT and TPAUSE instructions use IA32_UMWAIT_CONTROL at MSR index E1H
to determines the maximum time in TSC-quanta that the processor can reside
in either C0.1 or C0.2.

This patch emulates MSR IA32_UMWAIT_CONTROL in guest and differentiate
IA32_UMWAIT_CONTROL between host and guest. The variable
mwait_control_cached in arch/x86/power/umwait.c caches the MSR value, so
this patch uses it to avoid frequently rdmsr of IA32_UMWAIT_CONTROL.

Co-developed-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
---

Changes in v6:
	add check msr_info->host_initiated in get/set msr(Xiaoyao)
	restore the atomic_switch_umwait_control_msr()(Xiaoyao)
	rebase the patch because the kernel dependcy patch updated to
	v5: https://lkml.org/lkml/2019/6/19/972
---
 arch/x86/kernel/cpu/umwait.c |  3 ++-
 arch/x86/kvm/vmx/vmx.c       | 33 +++++++++++++++++++++++++++++++++
 arch/x86/kvm/vmx/vmx.h       |  3 +++
 arch/x86/kvm/x86.c           |  1 +
 4 files changed, 39 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/umwait.c b/arch/x86/kernel/cpu/umwait.c
index 4b2aff7b2d4d..db5c193ef136 100644
--- a/arch/x86/kernel/cpu/umwait.c
+++ b/arch/x86/kernel/cpu/umwait.c
@@ -15,7 +15,8 @@
  * MSR value. By default, umwait max time is 100000 in TSC-quanta and C0.2
  * is enabled
  */
-static u32 umwait_control_cached = UMWAIT_CTRL_VAL(100000, UMWAIT_C02_ENABLED);
+u32 umwait_control_cached = UMWAIT_CTRL_VAL(100000, UMWAIT_C02_ENABLED);
+EXPORT_SYMBOL_GPL(umwait_control_cached);
 
 /*
  * Serialize access to umwait_control_cached and IA32_UMWAIT_CONTROL MSR
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index b35bfac30a34..0d81cb9b96cf 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -1679,6 +1679,13 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 #endif
 	case MSR_EFER:
 		return kvm_get_msr_common(vcpu, msr_info);
+	case MSR_IA32_UMWAIT_CONTROL:
+		if (!msr_info->host_initiated &&
+		    !guest_cpuid_has(vcpu, X86_FEATURE_WAITPKG))
+			return 1;
+
+		msr_info->data = vmx->msr_ia32_umwait_control;
+		break;
 	case MSR_IA32_SPEC_CTRL:
 		if (!msr_info->host_initiated &&
 		    !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL))
@@ -1841,6 +1848,17 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 			return 1;
 		vmcs_write64(GUEST_BNDCFGS, data);
 		break;
+	case MSR_IA32_UMWAIT_CONTROL:
+		if (!msr_info->host_initiated &&
+		    !guest_cpuid_has(vcpu, X86_FEATURE_WAITPKG))
+			return 1;
+
+		/* The reserved bit IA32_UMWAIT_CONTROL[1] should be zero */
+		if (data & BIT_ULL(1))
+			return 1;
+
+		vmx->msr_ia32_umwait_control = data;
+		break;
 	case MSR_IA32_SPEC_CTRL:
 		if (!msr_info->host_initiated &&
 		    !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL))
@@ -4126,6 +4144,8 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 	vmx->rmode.vm86_active = 0;
 	vmx->spec_ctrl = 0;
 
+	vmx->msr_ia32_umwait_control = 0;
+
 	vcpu->arch.microcode_version = 0x100000000ULL;
 	vmx->vcpu.arch.regs[VCPU_REGS_RDX] = get_rdx_init_val();
 	kvm_set_cr8(vcpu, 0);
@@ -6339,6 +6359,16 @@ static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx)
 					msrs[i].host, false);
 }
 
+static void atomic_switch_umwait_control_msr(struct vcpu_vmx *vmx)
+{
+	if (vmx->msr_ia32_umwait_control != umwait_control_cached)
+		add_atomic_switch_msr(vmx, MSR_IA32_UMWAIT_CONTROL,
+			vmx->msr_ia32_umwait_control,
+			umwait_control_cached, false);
+	else
+		clear_atomic_switch_msr(vmx, MSR_IA32_UMWAIT_CONTROL);
+}
+
 static void vmx_arm_hv_timer(struct vcpu_vmx *vmx, u32 val)
 {
 	vmcs_write32(VMX_PREEMPTION_TIMER_VALUE, val);
@@ -6447,6 +6477,9 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
 
 	atomic_switch_perf_msrs(vmx);
 
+	if (guest_cpuid_has(vcpu, X86_FEATURE_WAITPKG))
+		atomic_switch_umwait_control_msr(vmx);
+
 	vmx_update_hv_timer(vcpu);
 
 	/*
diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
index 61128b48c503..8485bec7c38a 100644
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -14,6 +14,8 @@
 extern const u32 vmx_msr_index[];
 extern u64 host_efer;
 
+extern u32 umwait_control_cached;
+
 #define MSR_TYPE_R	1
 #define MSR_TYPE_W	2
 #define MSR_TYPE_RW	3
@@ -194,6 +196,7 @@ struct vcpu_vmx {
 #endif
 
 	u64		      spec_ctrl;
+	u64		      msr_ia32_umwait_control;
 
 	u32 vm_entry_controls_shadow;
 	u32 vm_exit_controls_shadow;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 83aefd759846..4480de459bf4 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1138,6 +1138,7 @@ static u32 msrs_to_save[] = {
 	MSR_IA32_RTIT_ADDR1_A, MSR_IA32_RTIT_ADDR1_B,
 	MSR_IA32_RTIT_ADDR2_A, MSR_IA32_RTIT_ADDR2_B,
 	MSR_IA32_RTIT_ADDR3_A, MSR_IA32_RTIT_ADDR3_B,
+	MSR_IA32_UMWAIT_CONTROL,
 };
 
 static unsigned num_msrs_to_save;
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH v6 3/3] KVM: vmx: handle vm-exit for UMWAIT and TPAUSE
  2019-06-21  5:57 [PATCH v6 0/3] KVM: x86: Enable user wait instructions Tao Xu
  2019-06-21  5:57 ` [PATCH v6 1/3] KVM: x86: add support for " Tao Xu
  2019-06-21  5:57 ` [PATCH v6 2/3] KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL Tao Xu
@ 2019-06-21  5:57 ` Tao Xu
  2 siblings, 0 replies; 7+ messages in thread
From: Tao Xu @ 2019-06-21  5:57 UTC (permalink / raw)
  To: pbonzini, rkrcmar, corbet, tglx, mingo, bp, hpa, sean.j.christopherson
  Cc: kvm, linux-kernel, fenghua.yu, xiaoyao.li, jingqi.liu, tao3.xu

As the latest Intel 64 and IA-32 Architectures Software Developer's
Manual, UMWAIT and TPAUSE instructions cause a VM exit if the
RDTSC exiting and enable user wait and pause VM-execution
controls are both 1.

This patch is to handle the vm-exit for UMWAIT and TPAUSE as this
should never happen.

Co-developed-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
---

No changes in v6
---
 arch/x86/include/uapi/asm/vmx.h |  6 +++++-
 arch/x86/kvm/vmx/vmx.c          | 16 ++++++++++++++++
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/uapi/asm/vmx.h b/arch/x86/include/uapi/asm/vmx.h
index d213ec5c3766..d88d7a68849b 100644
--- a/arch/x86/include/uapi/asm/vmx.h
+++ b/arch/x86/include/uapi/asm/vmx.h
@@ -85,6 +85,8 @@
 #define EXIT_REASON_PML_FULL            62
 #define EXIT_REASON_XSAVES              63
 #define EXIT_REASON_XRSTORS             64
+#define EXIT_REASON_UMWAIT              67
+#define EXIT_REASON_TPAUSE              68
 
 #define VMX_EXIT_REASONS \
 	{ EXIT_REASON_EXCEPTION_NMI,         "EXCEPTION_NMI" }, \
@@ -142,7 +144,9 @@
 	{ EXIT_REASON_RDSEED,                "RDSEED" }, \
 	{ EXIT_REASON_PML_FULL,              "PML_FULL" }, \
 	{ EXIT_REASON_XSAVES,                "XSAVES" }, \
-	{ EXIT_REASON_XRSTORS,               "XRSTORS" }
+	{ EXIT_REASON_XRSTORS,               "XRSTORS" }, \
+	{ EXIT_REASON_UMWAIT,                "UMWAIT" }, \
+	{ EXIT_REASON_TPAUSE,                "TPAUSE" }
 
 #define VMX_ABORT_SAVE_GUEST_MSR_FAIL        1
 #define VMX_ABORT_LOAD_HOST_PDPTE_FAIL       2
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 0d81cb9b96cf..26696679f4ca 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -5338,6 +5338,20 @@ static int handle_monitor(struct kvm_vcpu *vcpu)
 	return handle_nop(vcpu);
 }
 
+static int handle_umwait(struct kvm_vcpu *vcpu)
+{
+	kvm_skip_emulated_instruction(vcpu);
+	WARN(1, "this should never happen\n");
+	return 1;
+}
+
+static int handle_tpause(struct kvm_vcpu *vcpu)
+{
+	kvm_skip_emulated_instruction(vcpu);
+	WARN(1, "this should never happen\n");
+	return 1;
+}
+
 static int handle_invpcid(struct kvm_vcpu *vcpu)
 {
 	u32 vmx_instruction_info;
@@ -5548,6 +5562,8 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
 	[EXIT_REASON_VMFUNC]		      = handle_vmx_instruction,
 	[EXIT_REASON_PREEMPTION_TIMER]	      = handle_preemption_timer,
 	[EXIT_REASON_ENCLS]		      = handle_encls,
+	[EXIT_REASON_UMWAIT]                  = handle_umwait,
+	[EXIT_REASON_TPAUSE]                  = handle_tpause,
 };
 
 static const int kvm_vmx_max_exit_handlers =
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH v6 2/3] KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL
  2019-06-21  5:57 ` [PATCH v6 2/3] KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL Tao Xu
@ 2019-07-03  0:32   ` Tao Xu
  2019-07-11 13:25   ` Paolo Bonzini
  1 sibling, 0 replies; 7+ messages in thread
From: Tao Xu @ 2019-07-03  0:32 UTC (permalink / raw)
  To: pbonzini, rkrcmar, corbet, tglx, mingo, bp, hpa, sean.j.christopherson
  Cc: kvm, linux-kernel, fenghua.yu, xiaoyao.li, jingqi.liu

Ping ;)
On 6/21/2019 1:57 PM, Tao Xu wrote:
> UMWAIT and TPAUSE instructions use IA32_UMWAIT_CONTROL at MSR index E1H
> to determines the maximum time in TSC-quanta that the processor can reside
> in either C0.1 or C0.2.
> 
> This patch emulates MSR IA32_UMWAIT_CONTROL in guest and differentiate
> IA32_UMWAIT_CONTROL between host and guest. The variable
> mwait_control_cached in arch/x86/power/umwait.c caches the MSR value, so
> this patch uses it to avoid frequently rdmsr of IA32_UMWAIT_CONTROL.
> 
> Co-developed-by: Jingqi Liu <jingqi.liu@intel.com>
> Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
> Signed-off-by: Tao Xu <tao3.xu@intel.com>
> ---
> 
> Changes in v6:
> 	add check msr_info->host_initiated in get/set msr(Xiaoyao)
> 	restore the atomic_switch_umwait_control_msr()(Xiaoyao)
> 	rebase the patch because the kernel dependcy patch updated to
> 	v5: https://lkml.org/lkml/2019/6/19/972
> ---
>   arch/x86/kernel/cpu/umwait.c |  3 ++-
>   arch/x86/kvm/vmx/vmx.c       | 33 +++++++++++++++++++++++++++++++++
>   arch/x86/kvm/vmx/vmx.h       |  3 +++
>   arch/x86/kvm/x86.c           |  1 +
>   4 files changed, 39 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/kernel/cpu/umwait.c b/arch/x86/kernel/cpu/umwait.c
> index 4b2aff7b2d4d..db5c193ef136 100644
> --- a/arch/x86/kernel/cpu/umwait.c
> +++ b/arch/x86/kernel/cpu/umwait.c
> @@ -15,7 +15,8 @@
>    * MSR value. By default, umwait max time is 100000 in TSC-quanta and C0.2
>    * is enabled
>    */
> -static u32 umwait_control_cached = UMWAIT_CTRL_VAL(100000, UMWAIT_C02_ENABLED);
> +u32 umwait_control_cached = UMWAIT_CTRL_VAL(100000, UMWAIT_C02_ENABLED);
> +EXPORT_SYMBOL_GPL(umwait_control_cached);
>   
>   /*
>    * Serialize access to umwait_control_cached and IA32_UMWAIT_CONTROL MSR
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index b35bfac30a34..0d81cb9b96cf 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -1679,6 +1679,13 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
>   #endif
>   	case MSR_EFER:
>   		return kvm_get_msr_common(vcpu, msr_info);
> +	case MSR_IA32_UMWAIT_CONTROL:
> +		if (!msr_info->host_initiated &&
> +		    !guest_cpuid_has(vcpu, X86_FEATURE_WAITPKG))
> +			return 1;
> +
> +		msr_info->data = vmx->msr_ia32_umwait_control;
> +		break;
>   	case MSR_IA32_SPEC_CTRL:
>   		if (!msr_info->host_initiated &&
>   		    !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL))
> @@ -1841,6 +1848,17 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
>   			return 1;
>   		vmcs_write64(GUEST_BNDCFGS, data);
>   		break;
> +	case MSR_IA32_UMWAIT_CONTROL:
> +		if (!msr_info->host_initiated &&
> +		    !guest_cpuid_has(vcpu, X86_FEATURE_WAITPKG))
> +			return 1;
> +
> +		/* The reserved bit IA32_UMWAIT_CONTROL[1] should be zero */
> +		if (data & BIT_ULL(1))
> +			return 1;
> +
> +		vmx->msr_ia32_umwait_control = data;
> +		break;
>   	case MSR_IA32_SPEC_CTRL:
>   		if (!msr_info->host_initiated &&
>   		    !guest_cpuid_has(vcpu, X86_FEATURE_SPEC_CTRL))
> @@ -4126,6 +4144,8 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
>   	vmx->rmode.vm86_active = 0;
>   	vmx->spec_ctrl = 0;
>   
> +	vmx->msr_ia32_umwait_control = 0;
> +
>   	vcpu->arch.microcode_version = 0x100000000ULL;
>   	vmx->vcpu.arch.regs[VCPU_REGS_RDX] = get_rdx_init_val();
>   	kvm_set_cr8(vcpu, 0);
> @@ -6339,6 +6359,16 @@ static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx)
>   					msrs[i].host, false);
>   }
>   
> +static void atomic_switch_umwait_control_msr(struct vcpu_vmx *vmx)
> +{
> +	if (vmx->msr_ia32_umwait_control != umwait_control_cached)
> +		add_atomic_switch_msr(vmx, MSR_IA32_UMWAIT_CONTROL,
> +			vmx->msr_ia32_umwait_control,
> +			umwait_control_cached, false);
> +	else
> +		clear_atomic_switch_msr(vmx, MSR_IA32_UMWAIT_CONTROL);
> +}
> +
>   static void vmx_arm_hv_timer(struct vcpu_vmx *vmx, u32 val)
>   {
>   	vmcs_write32(VMX_PREEMPTION_TIMER_VALUE, val);
> @@ -6447,6 +6477,9 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
>   
>   	atomic_switch_perf_msrs(vmx);
>   
> +	if (guest_cpuid_has(vcpu, X86_FEATURE_WAITPKG))
> +		atomic_switch_umwait_control_msr(vmx);
> +
>   	vmx_update_hv_timer(vcpu);
>   
>   	/*
> diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
> index 61128b48c503..8485bec7c38a 100644
> --- a/arch/x86/kvm/vmx/vmx.h
> +++ b/arch/x86/kvm/vmx/vmx.h
> @@ -14,6 +14,8 @@
>   extern const u32 vmx_msr_index[];
>   extern u64 host_efer;
>   
> +extern u32 umwait_control_cached;
> +
>   #define MSR_TYPE_R	1
>   #define MSR_TYPE_W	2
>   #define MSR_TYPE_RW	3
> @@ -194,6 +196,7 @@ struct vcpu_vmx {
>   #endif
>   
>   	u64		      spec_ctrl;
> +	u64		      msr_ia32_umwait_control;
>   
>   	u32 vm_entry_controls_shadow;
>   	u32 vm_exit_controls_shadow;
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 83aefd759846..4480de459bf4 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -1138,6 +1138,7 @@ static u32 msrs_to_save[] = {
>   	MSR_IA32_RTIT_ADDR1_A, MSR_IA32_RTIT_ADDR1_B,
>   	MSR_IA32_RTIT_ADDR2_A, MSR_IA32_RTIT_ADDR2_B,
>   	MSR_IA32_RTIT_ADDR3_A, MSR_IA32_RTIT_ADDR3_B,
> +	MSR_IA32_UMWAIT_CONTROL,
>   };
>   
>   static unsigned num_msrs_to_save;
> 


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v6 2/3] KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL
  2019-06-21  5:57 ` [PATCH v6 2/3] KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL Tao Xu
  2019-07-03  0:32   ` Tao Xu
@ 2019-07-11 13:25   ` Paolo Bonzini
  2019-07-12  0:42     ` Tao Xu
  1 sibling, 1 reply; 7+ messages in thread
From: Paolo Bonzini @ 2019-07-11 13:25 UTC (permalink / raw)
  To: Tao Xu, rkrcmar, corbet, tglx, mingo, bp, hpa, sean.j.christopherson
  Cc: kvm, linux-kernel, fenghua.yu, xiaoyao.li, jingqi.liu

On 21/06/19 07:57, Tao Xu wrote:
> +	if (guest_cpuid_has(vcpu, X86_FEATURE_WAITPKG))
> +		atomic_switch_umwait_control_msr(vmx);
> +

guest_cpuid_has is slow.  Please replace it with a test on
secondary_exec_controls_get(vmx).

Are you going to look into nested virtualization support?  This should
include only 1) allowing setting the enable bit in secondary execution
controls, and passing it through in prepare_vmcs02_early; 2) reflecting
the vmexit in nested_vmx_exit_reflected.

Thanks,

Paolo

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v6 2/3] KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL
  2019-07-11 13:25   ` Paolo Bonzini
@ 2019-07-12  0:42     ` Tao Xu
  0 siblings, 0 replies; 7+ messages in thread
From: Tao Xu @ 2019-07-12  0:42 UTC (permalink / raw)
  To: Paolo Bonzini
  Cc: rkrcmar, corbet, tglx, mingo, bp, hpa, sean.j.christopherson,
	kvm, linux-kernel, fenghua.yu, xiaoyao.li, jingqi.liu

On 7/11/2019 9:25 PM, Paolo Bonzini wrote:
> On 21/06/19 07:57, Tao Xu wrote:
>> +	if (guest_cpuid_has(vcpu, X86_FEATURE_WAITPKG))
>> +		atomic_switch_umwait_control_msr(vmx);
>> +
> 
> guest_cpuid_has is slow.  Please replace it with a test on
> secondary_exec_controls_get(vmx).

Thank you paolo, I will improve it.

> 
> Are you going to look into nested virtualization support?  This should
> include only 1) allowing setting the enable bit in secondary execution
> controls, and passing it through in prepare_vmcs02_early; 2) reflecting
> the vmexit in nested_vmx_exit_reflected.
> 

I will add nested support in next version.

> Thanks,
> 
> Paolo
> 


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2019-07-12  0:42 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-21  5:57 [PATCH v6 0/3] KVM: x86: Enable user wait instructions Tao Xu
2019-06-21  5:57 ` [PATCH v6 1/3] KVM: x86: add support for " Tao Xu
2019-06-21  5:57 ` [PATCH v6 2/3] KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL Tao Xu
2019-07-03  0:32   ` Tao Xu
2019-07-11 13:25   ` Paolo Bonzini
2019-07-12  0:42     ` Tao Xu
2019-06-21  5:57 ` [PATCH v6 3/3] KVM: vmx: handle vm-exit for UMWAIT and TPAUSE Tao Xu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).