From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932198AbWAPCnq (ORCPT ); Sun, 15 Jan 2006 21:43:46 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932196AbWAPCnq (ORCPT ); Sun, 15 Jan 2006 21:43:46 -0500 Received: from outbound01.telus.net ([199.185.220.220]:27779 "EHLO priv-edtnes57.telusplanet.net") by vger.kernel.org with ESMTP id S932192AbWAPCnp (ORCPT ); Sun, 15 Jan 2006 21:43:45 -0500 Message-ID: <43CB0A15.7060009@telusplanet.net> Date: Sun, 15 Jan 2006 19:51:01 -0700 From: Bob Gill User-Agent: Mozilla Thunderbird 1.0.6 (X11/20050716) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Lee Revell CC: Linux kernel Mailing list Subject: Re: BTTV broken on recent kernels References: <43CAFF82.4030500@telusplanet.net> <1137377234.25801.145.camel@mindpipe> In-Reply-To: <1137377234.25801.145.camel@mindpipe> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Lee Revell wrote: >On Sun, 2006-01-15 at 19:05 -0700, Bob Gill wrote: > > >>Hi. The last several kernel versions have led to broken bttv (up to 4 >>or 5 kernel versions ago, I could watch tv on either mplayer or xawtv), >>but lately bttv is broken. My card is an 'bt878 compatible built by ATI >>(ATI TV Wonder VE). I'm pretty certain it worked as late as >>2.6.14-git7. >> >> > >You need to do a git bisect (check the list archives) to isolate the >change that broke it. > >Lee > > > > OK. I will, but I will add a tiny bit of additional info first. dmesg shows bttv loading up like this: Linux video capture interface: v1.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 bttv0: Bt878 (rev 2) at 0000:00:0b.0, irq: 5, latency: 32, mmio: 0xeb003000 bttv0: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is 1002:0003 bttv0: using: ATI TV-Wonder VE [card=64,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv0: using tuner=19 bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found tuner 0-0060: All bytes are equal. It is not a TEA5767 tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw]) tuner 0-0060: type set to 19 (Temic PAL* auto (4006 FN5)) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled .....and when trying to tune audio comes in, but dmsg shows video giving: agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode bttv0: PLL can sleep, using XTAL (28636363). bttv0: PLL: 28636363 => 35468950 .. ok bttv0: PLL can sleep, using XTAL (28636363). bttv0: PLL: 28636363 => 35468950 .. ok bttv0: PLL can sleep, using XTAL (28636363). bttv0: SCERR @ 348ec014,bits: HSYNC OFLOW FBUS SCERR* bttv0: SCERR @ 348ec000,bits: OFLOW FBUS SCERR* .... I will do the git bisect and reply in a bit. Thanks for your reply, Bob