linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wolfgang Grandegger <wg@grandegger.com>
To: Dan Murphy <dmurphy@ti.com>, mkl@pengutronix.de, davem@davemloft.net
Cc: linux-can@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 0/5] M_CAN Framework re-write
Date: Thu, 21 Feb 2019 17:41:27 +0100	[thread overview]
Message-ID: <43e01edf-9b9a-c68d-ec1a-218a8117f59e@grandegger.com> (raw)
In-Reply-To: <52148371-16aa-b87a-02f0-9037d5d34988@ti.com>

Hello Dan,

I will have a closer look end of this week!

Wolfgang.

Am 21.02.19 um 17:24 schrieb Dan Murphy:
> Bump
> 
> On 2/14/19 12:27 PM, Dan Murphy wrote:
>> Hello
>>
>> OK I did not give up on this patch series just got a little preoccupied with
>> some other kernel work.  But here is the update per the comments.
>>
>> It should be understood I broke these out for reviewability.
>> For instance the first patch does not compile on its own as including this
>> patch should not change the current functionality and it pulls all the io-mapped
>> code from the m_can base file to a platfrom file.
>>
>> The next patch "Migrate the m_can code to use the framework"
>> is the change to the kernel for the io-mapped conversion from a flat file to use
>> the framework.  Finally the rename patch just renames the m_can_priv to 
>> m_can_classdev.  I broke this change out specifically for readability of the
>> migration patch per comments on the code.
>>
>> AFAIC the first 3 patches can all be squashed into a single patch.  Or the
>> first 2 patches in the series can be re-arranged but then m_can functionality is
>> affected in the migration patch.
>>
>> Again the first 3 patches here are all just for readability and review purposes.
>>
>> Dan
>>
>> Dan Murphy (5):
>>   can: m_can: Create a m_can platform framework
>>   can: m_can: Migrate the m_can code to use the framework
>>   can: m_can: Rename m_can_priv to m_can_classdev
>>   dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver
>>   can: tcan4x5x: Add tcan4x5x driver to the kernel
>>
>>  .../devicetree/bindings/net/can/tcan4x5x.txt  |  37 +
>>  drivers/net/can/m_can/Kconfig                 |  14 +-
>>  drivers/net/can/m_can/Makefile                |   2 +
>>  drivers/net/can/m_can/m_can.c                 | 788 +++++++++---------
>>  drivers/net/can/m_can/m_can.h                 | 159 ++++
>>  drivers/net/can/m_can/m_can_platform.c        | 198 +++++
>>  drivers/net/can/m_can/tcan4x5x.c              | 531 ++++++++++++
>>  7 files changed, 1320 insertions(+), 409 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/net/can/tcan4x5x.txt
>>  create mode 100644 drivers/net/can/m_can/m_can.h
>>  create mode 100644 drivers/net/can/m_can/m_can_platform.c
>>  create mode 100644 drivers/net/can/m_can/tcan4x5x.c
>>
> 
> 

  reply	other threads:[~2019-02-21 16:41 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-14 18:27 Dan Murphy
2019-02-14 18:27 ` [PATCH v5 1/5] can: m_can: Create a m_can platform framework Dan Murphy
2019-02-28 20:12   ` Wolfgang Grandegger
2019-02-28 20:18     ` Dan Murphy
2019-02-14 18:27 ` [PATCH v5 2/5] can: m_can: Migrate the m_can code to use the framework Dan Murphy
2019-02-28 17:33   ` Wolfgang Grandegger
2019-02-28 17:57     ` Dan Murphy
2019-02-28 19:41       ` Wolfgang Grandegger
2019-02-28 19:59         ` Dan Murphy
2019-02-14 18:27 ` [PATCH v5 3/5] can: m_can: Rename m_can_priv to m_can_classdev Dan Murphy
2019-02-14 18:27 ` [PATCH v5 4/5] dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver Dan Murphy
2019-02-14 18:27 ` [PATCH v5 5/5] can: tcan4x5x: Add tcan4x5x driver to the kernel Dan Murphy
2019-02-28 17:50   ` Wolfgang Grandegger
2019-02-28 18:03     ` Dan Murphy
2019-02-28 20:07       ` Wolfgang Grandegger
2019-02-28 20:14         ` Dan Murphy
2019-02-21 16:24 ` [PATCH v5 0/5] M_CAN Framework re-write Dan Murphy
2019-02-21 16:41   ` Wolfgang Grandegger [this message]
2019-02-22  9:38     ` Wolfgang Grandegger
2019-02-22 12:50       ` Dan Murphy
2019-02-22 17:05         ` Dan Murphy
2019-02-24 11:27           ` Wolfgang Grandegger
2019-02-28 15:39             ` Dan Murphy
2019-02-28 16:40 ` Wolfgang Grandegger
2019-02-28 16:44   ` Dan Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=43e01edf-9b9a-c68d-ec1a-218a8117f59e@grandegger.com \
    --to=wg@grandegger.com \
    --cc=davem@davemloft.net \
    --cc=dmurphy@ti.com \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --subject='Re: [PATCH v5 0/5] M_CAN Framework re-write' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).