[PATCH v2 04/18] hexagon: replace setup_irq() by request_irq()

From: afzal mohammed <afzal.mohd.ma@gmail.com>
To: linux-hexagon@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Brian Cain <bcain@codeaurora.org>,
	Richard Fontana <rfontana@redhat.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Allison Randal <allison@lohutok.net>,
	Thomas Gleixner <tglx@linutronix.de>,
	Alexios Zavras <alexios.zavras@intel.com>
Subject: [PATCH v2 04/18] hexagon: replace setup_irq() by request_irq()
Date: Mon, 24 Feb 2020 06:19:35 +0530	[thread overview]
Message-ID: <44775ff418e0b784311c1d86aae4927da7fcc645.1582471508.git.afzal.mohd.ma@gmail.com> (raw)
In-Reply-To: <cover.1582471508.git.afzal.mohd.ma@gmail.com>

request_irq() is preferred over setup_irq(). The early boot setup_irq()
invocations happen either via 'init_IRQ()' or 'time_init()', while
memory allocators are ready by 'mm_init()'.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
---

v2:
 * Replace pr_err("request_irq() on %s failed" by
           pr_err("%s: request_irq() failed"
 * Commit message massage

 arch/hexagon/kernel/smp.c  | 17 ++++++++---------
 arch/hexagon/kernel/time.c | 11 +++--------
 2 files changed, 11 insertions(+), 17 deletions(-)

diff --git a/arch/hexagon/kernel/smp.c b/arch/hexagon/kernel/smp.c
index 0bbbe652a513..67f4b0bff250 100644
--- a/arch/hexagon/kernel/smp.c
+++ b/arch/hexagon/kernel/smp.c
@@ -114,12 +114,6 @@ void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg)
 	local_irq_restore(flags);
 }
 
-static struct irqaction ipi_intdesc = {
-	.handler = handle_ipi,
-	.flags = IRQF_TRIGGER_RISING,
-	.name = "ipi_handler"
-};
-
 void __init smp_prepare_boot_cpu(void)
 {
 }
@@ -155,7 +149,9 @@ void start_secondary(void)
 
 	cpu = smp_processor_id();
 
-	setup_irq(BASE_IPI_IRQ + cpu, &ipi_intdesc);
+	if (request_irq(BASE_IPI_IRQ + cpu, handle_ipi, IRQF_TRIGGER_RISING,
+			"ipi_handler", NULL))
+		pr_err("%s: request_irq() failed\n", "ipi_handler");
 
 	/*  Register the clock_event dummy  */
 	setup_percpu_clockdev();
@@ -213,8 +209,11 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		set_cpu_present(i, true);
 
 	/*  Also need to register the interrupts for IPI  */
-	if (max_cpus > 1)
-		setup_irq(BASE_IPI_IRQ, &ipi_intdesc);
+	if (max_cpus > 1) {
+		if (request_irq(BASE_IPI_IRQ, handle_ipi, IRQF_TRIGGER_RISING,
+				"ipi_handler", NULL))
+			pr_err("%s: request_irq() failed\n", "ipi_handler");
+	}
 }
 
 void smp_send_reschedule(int cpu)
diff --git a/arch/hexagon/kernel/time.c b/arch/hexagon/kernel/time.c
index f99e9257bed4..26550e46cf91 100644
--- a/arch/hexagon/kernel/time.c
+++ b/arch/hexagon/kernel/time.c
@@ -143,13 +143,6 @@ static irqreturn_t timer_interrupt(int irq, void *devid)
 	return IRQ_HANDLED;
 }
 
-/*  This should also be pulled from devtree  */
-static struct irqaction rtos_timer_intdesc = {
-	.handler = timer_interrupt,
-	.flags = IRQF_TIMER | IRQF_TRIGGER_RISING,
-	.name = "rtos_timer"
-};
-
 /*
  * time_init_deferred - called by start_kernel to set up timer/clock source
  *
@@ -195,7 +188,9 @@ void __init time_init_deferred(void)
 #endif
 
 	clockevents_register_device(ce_dev);
-	setup_irq(ce_dev->irq, &rtos_timer_intdesc);
+	if (request_irq(ce_dev->irq, timer_interrupt,
+			IRQF_TIMER | IRQF_TRIGGER_RISING, "rtos_timer", NULL))
+		pr_err("%s: request_irq() failed\n", "rtos_timer");
 }
 
 void __init time_init(void)
-- 
2.25.1

