From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751216AbWFWDdG (ORCPT ); Thu, 22 Jun 2006 23:33:06 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751229AbWFWDdF (ORCPT ); Thu, 22 Jun 2006 23:33:05 -0400 Received: from shawidc-mo1.cg.shawcable.net ([24.71.223.10]:3390 "EHLO pd3mo3so.prod.shaw.ca") by vger.kernel.org with ESMTP id S1751216AbWFWDdD (ORCPT ); Thu, 22 Jun 2006 23:33:03 -0400 Date: Thu, 22 Jun 2006 21:31:53 -0600 From: Robert Hancock Subject: Re: [PATCHSET] Announce: High-res timers, tickless/dyntick and dynamic HZ -V4 In-reply-to: To: tglx@timesys.com Cc: LKML , Ingo Molnar , Andrew Morton , Con Kolivas , Michal Piotrowski Message-id: <449B60A9.2000809@shaw.ca> MIME-version: 1.0 Content-type: text/plain; charset=ISO-8859-1; format=flowed Content-transfer-encoding: 7bit References: User-Agent: Thunderbird 1.5.0.4 (Windows/20060516) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Thomas Gleixner wrote: > An updated patchset is available from: > > http://www.tglx.de/projects/hrtimers/2.6.17/patch-2.6.17-hrt-dyntick4.patch On my Compaq Presario X1050 laptop running Fedora Core 5 I get: Disabling NO_HZ and high resolution timers due to timer broadcasting Not sure exactly what this is indicating or what's triggered this, but I'm assuming the patch isn't doing much on this machine? Note that the libata PATA patch is also applied. Full dmesg output: Linux version 2.6.17-1.2138_FC5idehrt (rob@localhost.localdomain) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Thu Jun 22 20:52:49 CST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable) BIOS-e820: 000000001ffd0000 - 000000001fff0c00 (reserved) BIOS-e820: 000000001fff0c00 - 000000001fffc000 (ACPI NVS) BIOS-e820: 000000001fffc000 - 0000000020000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. Using x86 segment limits to approximate NX protection On node 0 totalpages: 131024 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 126928 pages, LIFO batch:31 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 COMPAQ ) @ 0x000f6560 ACPI: RSDT (v001 HP CPQ0860 0x14070520 CPQ 0x00000001) @ 0x1fff0c84 ACPI: FADT (v002 HP CPQ0860 0x00000002 CPQ 0x00000001) @ 0x1fff0c00 ACPI: SSDT (v001 COMPAQ CPQGysr 0x00001001 MSFT 0x0100000e) @ 0x1fff5c3c ACPI: DSDT (v001 HP nx7000 0x00010000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000) Detected 1395.513 MHz processor. Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0150c000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Event source pit configured with caps set: 07 CPU 0 irqstacks, hard=c079f000 soft=c077f000 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 511860k/524096k available (2101k kernel code, 11540k reserved, 1197k data, 240k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2792.90 BogoMIPS (lpj=5585813) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f1bf 00000000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed ACPI: setting ELCR to 0200 (from 0c20) CPU0: Intel(R) Pentium(R) M processor 1400MHz stepping 05 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 1665k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=3 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [C046] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.C046] bus is 0 PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1100-113f claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.C046._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C047._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C058._PRT] ACPI: Embedded Controller [C0EA] (gpe 28) interrupt mode. ACPI: Power Resource [C18D] (on) ACPI: Power Resource [C195] (on) ACPI: Power Resource [C19C] (on) ACPI: Power Resource [C1A6] (on) ACPI: PCI Interrupt Link [C0C2] (IRQs 5 *10) ACPI: PCI Interrupt Link [C0C3] (IRQs 5 *10) ACPI: PCI Interrupt Link [C0C4] (IRQs *5 10) ACPI: PCI Interrupt Link [C0C5] (IRQs *5 10) ACPI: PCI Interrupt Link [C0C6] (IRQs 5 10) *0, disabled. ACPI: PCI Interrupt Link [C0C7] (IRQs 5 10) *11 ACPI: PCI Interrupt Link [C0C8] (IRQs 5 10) *0, disabled. ACPI: PCI Interrupt Link [C0C9] (IRQs *5 10) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0d: ioport range 0x1000-0x107f could not be reserved pnp: 00:0d: ioport range 0x1100-0x113f has been reserved pnp: 00:0d: ioport range 0x1200-0x121f has been reserved PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: 90400000-904fffff PREFETCH window: 98000000-9fffffff PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00002800-000028ff IO window: 00002c00-00002cff PREFETCH window: 30000000-31ffffff MEM window: 34000000-35ffffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: 90000000-903fffff PREFETCH window: 30000000-31ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 327680 bytes) TCP bind hash table entries: 8192 (order: 5, 163840 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1151010952.896:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Disabling NO_HZ and high resolution timers due to timer broadcasting ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: AGP aperture is 256M @ 0xb0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize libata version 1.20 loaded. ata_piix 0000:00:1f.1: version 1.05-ac7 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x4C40 irq 14 ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6003 85:3c69 86:3e01 87:6003 88:203f ata1: dev 0 ATA-7, max UDMA/100, 156368016 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix Vendor: ATA Model: SAMSUNG MP0804H Rev: UE20 Type: Direct-Access ANSI SCSI revision: 05 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4C48 irq 15 ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 ata2: dev 0 ATAPI, max UDMA/33 ata2: dev 0 configured for UDMA/33 scsi1 : ata_piix Vendor: QSI Model: CDRW/DVD SBW-241 Rev: VH04 Type: CD-ROM ANSI SCSI revision: 05 SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 Yenta: CardBus bridge found at 0000:02:04.0 [0e11:0860] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.0, mfunc 0x001c1112, devctl 0x44 Yenta: ISA IRQ mask 0x08d8, PCI irq 5 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff cs: IO port probe 0x2000-0x2fff: clean. pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:C1A3,PNP0f13:C1A4] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI wakeup devices: C058 C1AD C1A3 C1A4 C0AC C0B3 C0B4 C0B5 C0E7 C136 ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 240k freed Write protecting the kernel read-only data: 737k Time: tsc clocksource has been installed. Time: acpi_pm clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008 input: SynPS/2 Synaptics TouchPad as /class/input/input1 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: dm-0: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 1828034 ext3_orphan_cleanup: deleting unreferenced inode 1828031 EXT3-fs: dm-0: 2 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. audit(1151010980.709:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1417 types, 151 bools, 1 sens, 256 cats security: 57 classes, 41080 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1151010981.037:3): policy loaded auid=4294967295 SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts hw_random: cannot enable RNG, aborting ieee80211_crypt: registered algorithm 'NULL' 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 eth0: RTL-8139C+ at 0xe0834000, 00:02:3f:65:4d:74, IRQ 10 ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.1.1 ipw2200: Copyright(c) 2003-2006 Intel Corporation intel8x0_measure_ac97_clock: measured 55019 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1f.6 to 64 ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 5 ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [C0C5] -> GSI 5 (level, low) -> IRQ 5 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection cs: IO port probe 0x100-0x3af: excluding 0x140-0x14f 0x200-0x20f 0x370-0x37f cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 Floppy drive(s): fd0 is 1.44M USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 10, io base 0x000048c0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [C0C5] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 5, io base 0x000048e0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [C0C4] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 5, io base 0x00004c00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ieee1394: Initialized config rom entry `ip1394' ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 5 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [C0C9] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 5, io mem 0xa0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[90200000-902007ff] Max Packet=[2048] IR/IT contexts=[4/8] floppy0: no floppy controllers found Floppy drive(s): fd0 is 1.44M ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f383800c298] floppy0: no floppy controllers found parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready ACPI: AC Adapter [C134] (on-line) ACPI: Battery Slot [C11F] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [C1BE] ACPI: Lid Switch [C136] ibm_acpi: ec object not found ACPI: Video Device [C0D0] (multi-head: yes rom: no post: no) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda2, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs NTFS driver 2.1.27 [Flags: R/W MODULE]. NTFS volume version 3.1. SELinux: initialized (dev sda1, type ntfs), uses genfs_contexts Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1048568k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (4094 buckets, 32752 max) - 224 bytes per conntrack eth0: link down SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.1 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): eth1: link is not ready [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [C0C2] -> GSI 10 (level, low) -> IRQ 10 [drm] Initialized radeon 1.24.0 20060225 on minor 0 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [drm] Setting GART location based on new memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 2 usecs ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready ieee80211_crypt: registered algorithm 'CCMP' eth1: no IPv6 routers present -- Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from hancockr@nospamshaw.ca Home Page: http://www.roberthancock.com/