LKML Archive on lore.kernel.org
 help / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Andy Gross <andy.gross@linaro.org>,
	David Brown <david.brown@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Ohad Ben-Cohen <ohad@wizery.com>,
	Arun Kumar Neelakantam <aneela@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org
Subject: Re: [PATCH v5 03/10] arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes
Date: Fri, 1 Feb 2019 11:19:51 +0530
Message-ID: <4539b3ca-cace-9c71-0453-94427ad79b73@codeaurora.org> (raw)
In-Reply-To: <20190131003933.11436-4-bjorn.andersson@linaro.org>

Hey Bjorn,

Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>

On 01/31/2019 06:09 AM, Bjorn Andersson wrote:
> Add the Audio DSP (ADSP) and Compute DSP (CDSP) nodes for TrustZone
> based remoteproc, supporting booting these cores on e.g. the MTP, and
> enable the same for the MTP.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> Changes since v4:
> - None
> 
> Changes since v3:
> - Make xo reference the actual CXO clock
> 
>   arch/arm64/boot/dts/qcom/sdm845-mtp.dts |  8 ++++
>   arch/arm64/boot/dts/qcom/sdm845.dtsi    | 58 +++++++++++++++++++++++++
>   2 files changed, 66 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> index af8c6a2445a2..02b8357c8ce8 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> @@ -48,6 +48,10 @@
>   	};
>   };
>   
> +&adsp_pas {
> +	status = "okay";
> +};
> +
>   &apps_rsc {
>   	pm8998-rpmh-regulators {
>   		compatible = "qcom,pm8998-rpmh-regulators";
> @@ -344,6 +348,10 @@
>   	};
>   };
>   
> +&cdsp_pas {
> +	status = "okay";
> +};
> +
>   &gcc {
>   	protected-clocks = <GCC_QSPI_CORE_CLK>,
>   			   <GCC_QSPI_CORE_CLK_SRC>,
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index d19486ba1e5e..07d9cd6fba7d 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -325,6 +325,64 @@
>   		};
>   	};
>   
> +	adsp_pas: remoteproc-adsp {
> +		compatible = "qcom,sdm845-adsp-pas";
> +
> +		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
> +				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +		interrupt-names = "wdog", "fatal", "ready",
> +				  "handover", "stop-ack";
> +
> +		clocks = <&rpmhcc RPMH_CXO_CLK>;
> +		clock-names = "xo";
> +
> +		memory-region = <&adsp_mem>;
> +
> +		qcom,smem-states = <&adsp_smp2p_out 0>;
> +		qcom,smem-state-names = "stop";
> +
> +		status = "disabled";
> +
> +		glink-edge {
> +			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
> +			label = "lpass";
> +			qcom,remote-pid = <2>;
> +			mboxes = <&apss_shared 8>;
> +		};
> +	};
> +
> +	cdsp_pas: remoteproc-cdsp {
> +		compatible = "qcom,sdm845-cdsp-pas";
> +
> +		interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
> +				      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +				      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +				      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +				      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +		interrupt-names = "wdog", "fatal", "ready",
> +				  "handover", "stop-ack";
> +
> +		clocks = <&rpmhcc RPMH_CXO_CLK>;
> +		clock-names = "xo";
> +
> +		memory-region = <&cdsp_mem>;
> +
> +		qcom,smem-states = <&cdsp_smp2p_out 0>;
> +		qcom,smem-state-names = "stop";
> +
> +		status = "disabled";
> +
> +		glink-edge {
> +			interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
> +			label = "turing";
> +			qcom,remote-pid = <5>;
> +			mboxes = <&apss_shared 4>;
> +		};
> +	};
> +
>   	tcsr_mutex: hwlock {
>   		compatible = "qcom,tcsr-mutex";
>   		syscon = <&tcsr_mutex_regs 0 0x1000>;
> 

-- 
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc, is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply index

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-31  0:39 [PATCH v5 00/10] Qualcomm AOSS QMP driver and modem dts Bjorn Andersson
2019-01-31  0:39 ` [PATCH v5 01/10] arm64: dts: qcom: sdm845: Update reserved memory map Bjorn Andersson
2019-01-31 16:58   ` Sibi Sankar
2019-01-31  0:39 ` [PATCH v5 02/10] arm64: dts: qcom: sdm845: Define rmtfs memory Bjorn Andersson
2019-01-31 17:09   ` Sibi Sankar
2019-01-31  0:39 ` [PATCH v5 03/10] arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes Bjorn Andersson
2019-02-01  5:49   ` Sibi Sankar [this message]
2019-02-01 23:54   ` Doug Anderson
2019-01-31  0:39 ` [PATCH v5 04/10] dt-bindings: soc: qcom: Add AOSS QMP binding Bjorn Andersson
2019-01-31  0:39 ` [PATCH v5 05/10] soc: qcom: Add AOSS QMP communication driver Bjorn Andersson
2019-02-01 23:36   ` Doug Anderson
2019-02-06  1:33     ` Bjorn Andersson
2019-01-31  0:39 ` [PATCH v5 06/10] soc: qcom: Add AOSS QMP genpd provider Bjorn Andersson
2019-02-01  7:15   ` Sibi Sankar
2019-02-01 23:39   ` Doug Anderson
2019-01-31  0:39 ` [PATCH v5 07/10] remoteproc: q6v5-mss: Vote for rpmh power domains Bjorn Andersson
2019-01-31  4:51   ` Bjorn Andersson
2019-01-31  0:39 ` [PATCH v5 08/10] remoteproc: q6v5-mss: Active powerdomain for SDM845 Bjorn Andersson
2019-01-31  4:51   ` Bjorn Andersson
2019-01-31  0:39 ` [PATCH v5 09/10] arm64: dts: qcom: Add AOSS QMP node Bjorn Andersson
2019-02-01  7:17   ` Sibi Sankar
2019-01-31  0:39 ` [PATCH v5 10/10] arm64: dts: qcom: sdm845: Add Q6V5 MSS node Bjorn Andersson

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4539b3ca-cace-9c71-0453-94427ad79b73@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=aneela@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=ohad@wizery.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox