From: "Jan Beulich" <jbeulich@novell.com>
To: "Gary Hade" <garyhade@us.ibm.com>
Cc: <gregkh@suse.de>, <lcm@us.ibm.com>, <linux-kernel@vger.kernel.org>
Subject: Re: Avoid creating P2P prefetch window for expansion ROMs
Date: Tue, 27 Nov 2007 09:28:25 +0000 [thread overview]
Message-ID: <474BF149.76E4.0078.0@novell.com> (raw)
In-Reply-To: <20071126215953.GA23277@us.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 1598 bytes --]
>A kernel without the patch always forced creation of a prefetch
>window for expansion ROMs which was incorrect on systems where
>insufficient memory resources are available for both non-prefetch
>and prefetch windows. On the systems I was dealing with, the
>BIOS assumes (correctly, I believe) that expansion ROM memory
>resource needs will be satisfied from the non-prefetch window.
Why would ROM space generally need to be non-prefetchable? I can
see that special cases might require this, but as long as ROM space
really is just normal code and data, there's nothing wrong with
prefetching from it I would think. Of course I realize there's no way
to specify that on a per-device basis, so I think the BIOS must be
relied upon here.
>I think it would still be useful to know what system/PCI adapter
>combination you are seeing the problem with so that I can try
>to put together a setup that will reproduce the problem here.
>Alternatively, it would good if you wouldn't mind providing
>more information, testing possible fixes, etc. As a start,
>could you send me the following taken with and without the
>patch?
> - /proc/iomem
> - /proc/ioports
> - `dmesg` output
> - `lspci -vt` output
> - `lspci -vvv` output
Attached. *.0 is with the patch, *.1 is with it reverted. All output from
the SLE10SP2 (2.6.16.54-based) kernel that has that patch backported.
I'd also like to note that I found that a second of the systems I'm
regularly dealing with also has similar problems. I'm just not normally
looking at the boot messages that closely.
Jan
[-- Attachment #2: lspci-vvv.1 --]
[-- Type: application/octet-stream, Size: 44808 bytes --]
00:00.0 Host bridge: Intel Corporation E8500/E8501 Hub Interface 1.5 (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
00:01.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port D (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: ae500000-b04fffff
Prefetchable memory behind bridge: 0000000098000000-000000009bffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40b9
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 1
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 3, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:02.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x8 Port C (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: ac500000-ae4fffff
Prefetchable memory behind bridge: 000000009c000000-000000009fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40c1
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 2
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 1, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:03.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port C1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40c9
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 3
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Root: Correctable- Non-Fatal- Fatal- PME-
00:04.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port B0 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: aa500000-ac4fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000a3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40d1
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 4
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 4, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:05.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port B1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: a8500000-aa4fffff
Prefetchable memory behind bridge: 00000000a4000000-00000000a7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40d9
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 5
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 5, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:06.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port A0 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0c, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a8300000-a84fffff
Prefetchable memory behind bridge: 0000000080000000-00000000800fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40e1
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 256 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 6
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Root: Correctable- Non-Fatal- Fatal- PME-
00:07.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port A1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0f, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a8100000-a82fffff
Prefetchable memory behind bridge: 0000000080100000-00000000802fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40e9
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 256 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 7
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Root: Correctable- Non-Fatal- Fatal- PME-
00:08.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0a.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0c.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0e.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.0 Host bridge: Intel Corporation E8500/E8501 FSB Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.1 Host bridge: Intel Corporation E8500/E8501 Address Mapping Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.2 Host bridge: Intel Corporation E8500/E8501 RAS Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:11.0 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:11.1 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:11.2 Host bridge: Intel Corporation E8500/E8501 Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.0 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.1 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.2 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.3 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.4 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.5 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.6 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.7 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 50
Region 4: I/O ports at 8060 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 58
Region 4: I/O ports at 8040 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 66
Region 4: I/O ports at 8020 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 106
Region 0: Memory at b0500000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: a8000000-a80fffff
Prefetchable memory behind bridge: 90000000-97ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 66
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at 8080 [size=16]
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 8000 [size=32]
0a:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at a8400000 (64-bit, non-prefetchable) [size=4K]
Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=48
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [78] #0c [0009]
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
Status: Dev=0a:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0a:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0a, secondary=0c, subordinate=0c, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a8300000-a83fffff
Prefetchable memory behind bridge: 0000000080000000-00000000800fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=0a:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0c:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 90
Region 0: Memory at a8300000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=1
Status: Dev=0c:02.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: ddff49f7d06e6df8 Data: ad6f
0c:02.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 98
Region 0: Memory at a8310000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=1
Status: Dev=0c:02.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: 9ecc10f2c2609318 Data: 2c68
0d:00.0 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor (A-Segment Bridge) (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0d, secondary=0e, subordinate=0e, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a8100000-a81fffff
Prefetchable memory behind bridge: 0000000080100000-00000000802fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=0d:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0d:00.2 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor (B-Segment Bridge) (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0d, secondary=0f, subordinate=0f, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=0d:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0e:05.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 74
Region 0: I/O ports at 3100 [size=256]
Region 1: Memory at a8100000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at a8110000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at 80100000 [disabled] [size=1M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=0e:05.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=8 DMCRS=16 RSCEM- 266MHz- 533MHz-
0e:05.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 82
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at a8120000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at a8130000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at 80200000 [disabled] [size=1M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=0e:05.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=8 DMCRS=16 RSCEM- 266MHz- 533MHz-
10:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 90000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at a8000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fffe0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[-- Attachment #3: dmesg.1 --]
[-- Type: application/octet-stream, Size: 35319 bytes --]
Bootdata ok (command line is root=/dev/sda8 vga=0x31a video=vesafb:mtrr:3 splash=verbose noresume)
Linux version 2.6.16.54-2007-11-14-jb (jbeulich@dus-dev-sles10t) (gcc version 4.1.2 20070115 (prerelease) (SUSE Linux)) #2 SMP Tue Nov 27 10:11:03 CET 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f89c000 (usable)
BIOS-e820: 000000007f89c000 - 000000007f912000 (reserved)
BIOS-e820: 000000007f912000 - 000000007f939000 (usable)
BIOS-e820: 000000007f939000 - 000000007f93a000 (reserved)
BIOS-e820: 000000007f93a000 - 000000007f944000 (usable)
BIOS-e820: 000000007f944000 - 000000007f977000 (reserved)
BIOS-e820: 000000007f977000 - 000000007f9f8000 (ACPI NVS)
BIOS-e820: 000000007f9f8000 - 000000007fa12000 (reserved)
BIOS-e820: 000000007fa12000 - 000000007fa6b000 (usable)
BIOS-e820: 000000007fa6b000 - 000000007fa92000 (reserved)
BIOS-e820: 000000007fa92000 - 000000007fb06000 (usable)
BIOS-e820: 000000007fb06000 - 000000007fb12000 (ACPI NVS)
BIOS-e820: 000000007fb12000 - 000000007fb18000 (usable)
BIOS-e820: 000000007fb18000 - 000000007fb32000 (ACPI data)
BIOS-e820: 000000007fb32000 - 000000007fb33000 (reserved)
BIOS-e820: 000000007fb33000 - 000000007fb7a000 (usable)
BIOS-e820: 000000007fb7a000 - 000000007fbfa000 (reserved)
BIOS-e820: 000000007fbfa000 - 000000007fc00000 (usable)
BIOS-e820: 00000000fffa0000 - 00000000fffac000 (reserved)
BIOS-e820: 0000000100000000 - 0000000280000000 (usable)
DMI 2.3 present.
ACPI: RSDP (v002 INTEL ) @ 0x00000000000f03d0
ACPI: XSDT (v001 INTEL SHW40M 0x00000002 MSFT 0x01000013) @ 0x000000007fb31f30
ACPI: FADT (v003 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb2fd90
ACPI: MADT (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb2fc10
ACPI: SRAT (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb20f90
ACPI: MCFG (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb20f10
ACPI: SPCR (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb20e90
ACPI: SSDT (v001 INTEL SHW40M 0x00004000 INTL 0x20030918) @ 0x000000007fb1e010
ACPI: SSDT (v001 INTEL SHW40M 0x00004004 INTL 0x20030918) @ 0x000000007fb1c010
ACPI: SSDT (v001 INTEL SHW40M 0x00004008 INTL 0x20030918) @ 0x000000007fb1a010
ACPI: SSDT (v001 INTEL SHW40M 0x0000400c INTL 0x20030918) @ 0x000000007fb18010
ACPI: DSDT (v001 INTEL SHW40M 0x00000002 INTL 0x20030918) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000280000000
Bootmem setup node 0 0000000000000000-0000000280000000
On node 0 totalpages: 2058801
DMA zone: 3084 pages, LIFO batch:0
DMA32 zone: 504357 pages, LIFO batch:31
Normal zone: 1551360 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x08] enabled)
Processor #8 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x0e] enabled)
Processor #14 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] enabled)
Processor #0 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x06] enabled)
Processor #6 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x0a] enabled)
Processor #10 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] enabled)
Processor #12 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x02] enabled)
Processor #2 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x04] enabled)
Processor #4 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x09] enabled)
Processor #9 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0f] enabled)
Processor #15 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
Processor #1 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x07] enabled)
Processor #7 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x0b] enabled)
Processor #11 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0d] enabled)
Processor #13 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled)
Processor #3 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled)
Processor #5 15:6 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec85000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec85000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec85800] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec85800, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec86000] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec86000, GSI 72-95
ACPI: IOAPIC (id[0x0c] address[0xfec86800] gsi_base[96])
IOAPIC[4]: apic_id 12, version 32, address 0xfec86800, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to clustered
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7fc00000:803a0000)
Built 1 zonelists
Kernel command line: root=/dev/sda8 vga=0x31a video=vesafb:mtrr:3 splash=verbose noresume
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 3391.587 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x1d14000 - 0x5d14000
Nosave address range: 000000000009f000 - 0000000000100000
Nosave address range: 000000007f89c000 - 000000007f912000
Nosave address range: 000000007f939000 - 000000007f93a000
Nosave address range: 000000007f944000 - 000000007f977000
Nosave address range: 000000007f977000 - 000000007f9f8000
Nosave address range: 000000007f9f8000 - 000000007fa12000
Nosave address range: 000000007fa6b000 - 000000007fa92000
Nosave address range: 000000007fb06000 - 000000007fb12000
Nosave address range: 000000007fb18000 - 000000007fb32000
Nosave address range: 000000007fb32000 - 000000007fb33000
Nosave address range: 000000007fb7a000 - 000000007fbfa000
Nosave address range: 000000007fc00000 - 00000000fffa0000
Nosave address range: 00000000fffa0000 - 00000000fffac000
Nosave address range: 00000000fffac000 - 0000000100000000
Memory: 8152836k/10485760k available (1776k kernel code, 229164k reserved, 742k data, 196k init)
Calibrating delay using timer specific routine.. 6797.38 BogoMIPS (lpj=13594760)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
checking if image is initramfs... it is
Freeing initrd memory: 3009k freed
not found!
Using local APIC timer interrupts.
result 12469029
Detected 12.469 MHz APIC timer.
Booting processor 1/16 APIC 0x8
Initializing CPU#1
Calibrating delay using timer specific routine.. 6783.57 BogoMIPS (lpj=13567147)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 2/16 APIC 0xe
Initializing CPU#2
Calibrating delay using timer specific routine.. 6783.71 BogoMIPS (lpj=13567433)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
CPU2: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 3/16 APIC 0x6
Initializing CPU#3
Calibrating delay using timer specific routine.. 6783.68 BogoMIPS (lpj=13567366)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 4/16 APIC 0xa
Initializing CPU#4
Calibrating delay using timer specific routine.. 6783.68 BogoMIPS (lpj=13567366)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
CPU4: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 5/16 APIC 0xc
Initializing CPU#5
Calibrating delay using timer specific routine.. 6783.70 BogoMIPS (lpj=13567409)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU5: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 6/16 APIC 0x2
Initializing CPU#6
Calibrating delay using timer specific routine.. 6783.47 BogoMIPS (lpj=13566958)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU6: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 7/16 APIC 0x4
Initializing CPU#7
Calibrating delay using timer specific routine.. 6783.65 BogoMIPS (lpj=13567300)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU7: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 8/16 APIC 0x9
Initializing CPU#8
Calibrating delay using timer specific routine.. 6783.68 BogoMIPS (lpj=13567370)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
CPU8: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 9/16 APIC 0xf
Initializing CPU#9
Calibrating delay using timer specific routine.. 6783.66 BogoMIPS (lpj=13567337)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
CPU9: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 10/16 APIC 0x1
Initializing CPU#10
Calibrating delay using timer specific routine.. 6783.85 BogoMIPS (lpj=13567711)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU10: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 11/16 APIC 0x7
Initializing CPU#11
Calibrating delay using timer specific routine.. 6783.69 BogoMIPS (lpj=13567397)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU11: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 12/16 APIC 0xb
Initializing CPU#12
Calibrating delay using timer specific routine.. 6783.67 BogoMIPS (lpj=13567358)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
CPU12: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 13/16 APIC 0xd
Initializing CPU#13
Calibrating delay using timer specific routine.. 6783.71 BogoMIPS (lpj=13567420)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU13: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 14/16 APIC 0x3
Initializing CPU#14
Calibrating delay using timer specific routine.. 6783.51 BogoMIPS (lpj=13567028)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU14: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 15/16 APIC 0x5
Initializing CPU#15
Calibrating delay using timer specific routine.. 6783.72 BogoMIPS (lpj=13567448)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU15: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Brought up 16 CPUs
testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)!
migration_cost=77,9706
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: BIOS Bug: MCFG area is not E820-reserved
PCI: Not using MMCONFIG.
ACPI: Subsystem revision 20060127
ACPI Error (evgpeblk-0284): Unknown GPE method type: NTF_ (name not of form _Lxx or _Exx) [20060127]
ACPI Error (evgpeblk-0284): Unknown GPE method type: PNTS (name not of form _Lxx or _Exx) [20060127]
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [TNB] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
Boot video device is 0000:10:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.ICHB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 9 10 11 12)
ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI7.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI7.PXHB._PRT]
ACPI: Device [M1] status [0000000c]: functional but not present; setting present
ACPI: Device [M2] status [0000000c]: functional but not present; setting present
ACPI: Device [M3] status [0000000c]: functional but not present; setting present
ACPI: Device [M4] status [0000000c]: functional but not present; setting present
ACPI: Device [M5] status [0000000c]: functional but not present; setting present
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: 7000-7fff
MEM window: ae500000-b04fffff
PREFETCH window: 98000000-9bffffff
PCI: Bridge: 0000:00:02.0
IO window: 6000-6fff
MEM window: ac500000-ae4fffff
PREFETCH window: 9c000000-9fffffff
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: 5000-5fff
MEM window: aa500000-ac4fffff
PREFETCH window: a0000000-a3ffffff
PCI: Bridge: 0000:00:05.0
IO window: 4000-4fff
MEM window: a8500000-aa4fffff
PREFETCH window: a4000000-a7ffffff
PCI: Bridge: 0000:0a:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:0a:00.2
IO window: disabled.
MEM window: a8300000-a83fffff
PREFETCH window: 80000000-800fffff
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: a8300000-a84fffff
PREFETCH window: 80000000-800fffff
PCI: Bridge: 0000:0d:00.0
IO window: 3000-3fff
MEM window: a8100000-a81fffff
PREFETCH window: 80100000-802fffff
PCI: Bridge: 0000:0d:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: 3000-3fff
MEM window: a8100000-a82fffff
PREFETCH window: 80100000-802fffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: a8000000-a80fffff
PREFETCH window: 90000000-97ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 47 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:0a:00.0 to 64
PCI: Setting latency timer of device 0000:0a:00.2 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:0d:00.0 to 64
PCI: Setting latency timer of device 0000:0d:00.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie02]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie02]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie02]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
vesafb: framebuffer at 0x90000000, mapped to 0xffffc20000080000, using 5120k, total 16384k
vesafb: mode is 1280x1024x16, linelength=2560, pages=5
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Freeing unused kernel memory: 196k freed
Write protecting the kernel read-only data: 330k
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
GSI 17 sharing vector 0x32 and IRQ 17
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 50, io base 0x00008060
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.54-2007-11-14-jb uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
GSI 18 sharing vector 0x3A and IRQ 18
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 58, io base 0x00008040
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.54-2007-11-14-jb uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 19 sharing vector 0x42 and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 66, io base 0x00008020
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16.54-2007-11-14-jb uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: new device found, idVendor=0424, idProduct=a700
usb 2-1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 3 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 2
Fusion MPT base driver 3.04.06-suse
Copyright (c) 1999-2007 LSI Corporation
usb 3-1: new device found, idVendor=0557, idProduct=2220
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: ATEN CS-1758/54
usb 3-1: Manufacturer: ATEN
usb 3-1: configuration #1 chosen from 1 choice
Fusion MPT SPI Host driver 3.04.06-suse
GSI 20 sharing vector 0x4A and IRQ 20
ACPI: PCI Interrupt 0000:0e:05.0[A] -> GSI 72 (level, low) -> IRQ 74
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=74
Vendor: MAXTOR Model: ATLAS10K5_73SCA Rev: JNZH
Type: Direct-Access ANSI SCSI revision: 03
target0:0:0: Beginning Domain Validation
target0:0:0: Ending Domain Validation
target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127)
SCSI device sda: 143666192 512-byte hdwr sectors (73557 MB)
sda: Write Protect is off
sda: Mode Sense: bf 00 10 08
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 143666192 512-byte hdwr sectors (73557 MB)
sda: Write Protect is off
sda: Mode Sense: bf 00 10 08
SCSI device sda: drive cache: write back w/ FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Vendor: ESG-SHV Model: SCA HSBP M35 Rev: 1.07
Type: Processor ANSI SCSI revision: 02
target0:0:6: Beginning Domain Validation
target0:0:6: Ending Domain Validation
target0:0:6: asynchronous
0:0:6:0: Attached scsi generic sg1 type 3
GSI 21 sharing vector 0x52 and IRQ 21
ACPI: PCI Interrupt 0000:0e:05.1[B] -> GSI 73 (level, low) -> IRQ 82
Losing some ticks... checking if CPU frequency changed.
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=82
Vendor: ESG-SHV Model: SCA HSBP M35 Rev: 1.07
Type: Processor ANSI SCSI revision: 02
target1:0:6: Beginning Domain Validation
target1:0:6: Ending Domain Validation
target1:0:6: asynchronous
1:0:6:0: Attached scsi generic sg2 type 3
Vendor: MAXTOR Model: ATLAS10K5_73SCA Rev: JNZH
Type: Direct-Access ANSI SCSI revision: 03
target1:0:10: Beginning Domain Validation
target1:0:10: Ending Domain Validation
target1:0:10: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127)
SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB)
sdb: Write Protect is off
sdb: Mode Sense: bf 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB)
sdb: Write Protect is off
sdb: Mode Sense: bf 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
sdb: sdb1 sdb2
sd 1:0:10:0: Attached scsi disk sdb
sd 1:0:10:0: Attached scsi generic sg3 type 0
usbcore: registered new driver hiddev
input: ATEN ATEN CS-1758/54 as /class/input/input1
input: USB HID v1.10 Keyboard [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
input: ATEN ATEN CS-1758/54 as /class/input/input2
input: USB HID v1.10 Mouse [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
usbcore: registered new driver usbhid
/home/jbeulich/cpp/kernel/sle10sp2-2007-11-14/drivers/usb/input/hid-core.c: v2.6:USB HID core driver
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00ac7
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x8080 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x8088 irq 15
scsi2 : ata_piix
ata1.00: ATAPI, max UDMA/33
ata1.00: configured for UDMA/33
scsi3 : ata_piix
ATA: abnormal status 0x7F on port 0x177
Vendor: QSI Model: DVD-ROM SDR-083 Rev: MX13
Type: CD-ROM ANSI SCSI revision: 05
2:0:0:0: Attached scsi generic sg4 type 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda8: found reiserfs format "3.6" with standard journal
ReiserFS: sda8: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda8: checking transaction log (sda8)
ReiserFS: sda8: Using r5 hash to sort names
Adding 4200956k swap on /dev/sdb1. Priority:-1 extents:1 across:4200956k
Fusion MPT misc device (ioctl) driver 3.04.06-suse
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
tg3.c:v3.71b (December 15, 2006)
GSI 22 sharing vector 0x5A and IRQ 22
ACPI: PCI Interrupt 0000:0c:02.0[A] -> GSI 48 (level, low) -> IRQ 90
hw_random: RNG not detected
eth0: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0e:0c:43:43:45
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0]
eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
GSI 23 sharing vector 0x62 and IRQ 23
ACPI: PCI Interrupt 0000:0c:02.1[B] -> GSI 49 (level, low) -> IRQ 98
GSI 24 sharing vector 0x6A and IRQ 24
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 106
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
eth1: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0e:0c:43:43:46
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: irq 106, io mem 0xb0500000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: new device found, idVendor=0000, idProduct=0000
usb 2-1: USB disconnect, address 2
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.16.54-2007-11-14-jb ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 3-1: USB disconnect, address 2
shpchp: HPC vendor_id 8086 device_id 329 ss_vid 0 ss_did 0
ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 47 (level, low) -> IRQ 169
shpchp: Can't get msi for the hotplug controller
shpchp: Use INTx for the hotplug controller
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usb 4-3: new high speed USB device using ehci_hcd and address 2
eth1 renamed to eth2
eth0 renamed to eth3
usb 4-3: new device found, idVendor=0424, idProduct=a700
usb 4-3: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-3: configuration #1 chosen from 1 choice
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 3 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 3
usb 3-1: new device found, idVendor=0557, idProduct=2220
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: ATEN CS-1758/54
usb 3-1: Manufacturer: ATEN
usb 3-1: configuration #1 chosen from 1 choice
input: ATEN ATEN CS-1758/54 as /class/input/input3
input: USB HID v1.10 Keyboard [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
input: ATEN ATEN CS-1758/54 as /class/input/input4
input: USB HID v1.10 Mouse [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
loop: loaded (max 8 devices)
ReiserFS: sda9: found reiserfs format "3.6" with standard journal
ReiserFS: sda9: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda9: checking transaction log (sda9)
ReiserFS: sda9: Using r5 hash to sort names
ReiserFS: sda10: found reiserfs format "3.6" with standard journal
ReiserFS: sda10: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda10: journal params: device sda10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda10: checking transaction log (sda10)
ReiserFS: sda10: Using r5 hash to sort names
ReiserFS: sdb2: found reiserfs format "3.6" with standard journal
ReiserFS: sdb2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdb2: checking transaction log (sdb2)
ReiserFS: sdb2: Using r5 hash to sort names
ReiserFS: sda5: found reiserfs format "3.6" with standard journal
ReiserFS: sda5: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda5: checking transaction log (sda5)
ReiserFS: sda5: Using r5 hash to sort names
ReiserFS: sda6: found reiserfs format "3.6" with standard journal
ReiserFS: sda6: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda6: checking transaction log (sda6)
ReiserFS: sda6: Using r5 hash to sort names
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda7: checking transaction log (sda7)
ReiserFS: sda7: Using r5 hash to sort names
ACPI: Power Button (FF) [PWRF]
tg3: eth3: Link is up at 100 Mbps, half duplex.
tg3: eth3: Flow control is off for TX and off for RX.
IA-32 Microcode Update Driver: v1.14b <tigran@veritas.com>
IA-32 Microcode Update Driver v1.14b unregistered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6 over IPv4 tunneling driver
acpi-cpufreq: CPU0 - ACPI performance management activated.
acpi-cpufreq: CPU1 - ACPI performance management activated.
acpi-cpufreq: CPU2 - ACPI performance management activated.
acpi-cpufreq: CPU3 - ACPI performance management activated.
acpi-cpufreq: CPU4 - ACPI performance management activated.
acpi-cpufreq: CPU5 - ACPI performance management activated.
acpi-cpufreq: CPU6 - ACPI performance management activated.
acpi-cpufreq: CPU7 - ACPI performance management activated.
acpi-cpufreq: CPU8 - ACPI performance management activated.
acpi-cpufreq: CPU9 - ACPI performance management activated.
acpi-cpufreq: CPU10 - ACPI performance management activated.
acpi-cpufreq: CPU11 - ACPI performance management activated.
acpi-cpufreq: CPU12 - ACPI performance management activated.
acpi-cpufreq: CPU13 - ACPI performance management activated.
acpi-cpufreq: CPU14 - ACPI performance management activated.
acpi-cpufreq: CPU15 - ACPI performance management activated.
eth3: no IPv6 routers present
[-- Attachment #4: iomem.0 --]
[-- Type: application/octet-stream, Size: 1934 bytes --]
00000000-0009efff : System RAM
00000000-00000000 : Crash kernel
000a0000-000bffff : Video RAM area
000c0000-000cafff : Video ROM
000cb000-000cefff : Adapter ROM
000f0000-000fffff : System ROM
00100000-7f89bfff : System RAM
00100000-002bc1e6 : Kernel code
002bc1e7-00375d57 : Kernel data
7f89c000-7f911fff : reserved
7f912000-7f938fff : System RAM
7f939000-7f939fff : reserved
7f93a000-7f943fff : System RAM
7f944000-7f976fff : reserved
7f977000-7f9f7fff : ACPI Non-volatile Storage
7f9f8000-7fa11fff : reserved
7fa12000-7fa6afff : System RAM
7fa6b000-7fa91fff : reserved
7fa92000-7fb05fff : System RAM
7fb06000-7fb11fff : ACPI Non-volatile Storage
7fb12000-7fb17fff : System RAM
7fb18000-7fb31fff : ACPI Tables
7fb32000-7fb32fff : reserved
7fb33000-7fb79fff : System RAM
7fb7a000-7fbf9fff : reserved
7fbfa000-7fbfffff : System RAM
90000000-97ffffff : PCI Bus #10
90000000-97ffffff : 0000:10:00.0
90000000-90ffffff : vesafb
98000000-9bffffff : PCI Bus #01
9c000000-9fffffff : PCI Bus #03
a0000000-a3ffffff : PCI Bus #06
a4000000-a7ffffff : PCI Bus #08
a8000000-a80fffff : PCI Bus #10
a8000000-a800ffff : 0000:10:00.0
a8100000-a82fffff : PCI Bus #0d
a8100000-a81fffff : PCI Bus #0e
a8100000-a810ffff : 0000:0e:05.0
a8110000-a811ffff : 0000:0e:05.0
a8120000-a812ffff : 0000:0e:05.1
a8130000-a813ffff : 0000:0e:05.1
a8300000-a84fffff : PCI Bus #0a
a8300000-a83fffff : PCI Bus #0c
a8300000-a830ffff : 0000:0c:02.0
a8300000-a830ffff : tg3
a8310000-a831ffff : 0000:0c:02.1
a8310000-a831ffff : tg3
a8320000-a833ffff : 0000:0c:02.0
a8400000-a8400fff : 0000:0a:00.0
a8400000-a8400027 : shpchp
a8500000-aa4fffff : PCI Bus #08
aa500000-ac4fffff : PCI Bus #06
ac500000-ae4fffff : PCI Bus #03
ae500000-b04fffff : PCI Bus #01
b0500000-b05003ff : 0000:00:1d.7
b0500000-b05003ff : ehci_hcd
fffa0000-fffabfff : reserved
fffe0000-ffffffff : 0000:10:00.0
100000000-27fffffff : System RAM
[-- Attachment #5: iomem.1 --]
[-- Type: application/octet-stream, Size: 2140 bytes --]
00000000-0009efff : System RAM
00000000-00000000 : Crash kernel
000a0000-000bffff : Video RAM area
000c0000-000cafff : Video ROM
000cb000-000cefff : Adapter ROM
000f0000-000fffff : System ROM
00100000-7f89bfff : System RAM
00100000-002bc1e6 : Kernel code
002bc1e7-00375d57 : Kernel data
7f89c000-7f911fff : reserved
7f912000-7f938fff : System RAM
7f939000-7f939fff : reserved
7f93a000-7f943fff : System RAM
7f944000-7f976fff : reserved
7f977000-7f9f7fff : ACPI Non-volatile Storage
7f9f8000-7fa11fff : reserved
7fa12000-7fa6afff : System RAM
7fa6b000-7fa91fff : reserved
7fa92000-7fb05fff : System RAM
7fb06000-7fb11fff : ACPI Non-volatile Storage
7fb12000-7fb17fff : System RAM
7fb18000-7fb31fff : ACPI Tables
7fb32000-7fb32fff : reserved
7fb33000-7fb79fff : System RAM
7fb7a000-7fbf9fff : reserved
7fbfa000-7fbfffff : System RAM
80000000-800fffff : PCI Bus #0a
80000000-800fffff : PCI Bus #0c
80000000-8001ffff : 0000:0c:02.0
80100000-802fffff : PCI Bus #0d
80100000-802fffff : PCI Bus #0e
80100000-801fffff : 0000:0e:05.0
80200000-802fffff : 0000:0e:05.1
90000000-97ffffff : PCI Bus #10
90000000-97ffffff : 0000:10:00.0
90000000-90ffffff : vesafb
98000000-9bffffff : PCI Bus #01
9c000000-9fffffff : PCI Bus #03
a0000000-a3ffffff : PCI Bus #06
a4000000-a7ffffff : PCI Bus #08
a8000000-a80fffff : PCI Bus #10
a8000000-a800ffff : 0000:10:00.0
a8100000-a82fffff : PCI Bus #0d
a8100000-a81fffff : PCI Bus #0e
a8100000-a810ffff : 0000:0e:05.0
a8110000-a811ffff : 0000:0e:05.0
a8120000-a812ffff : 0000:0e:05.1
a8130000-a813ffff : 0000:0e:05.1
a8300000-a84fffff : PCI Bus #0a
a8300000-a83fffff : PCI Bus #0c
a8300000-a830ffff : 0000:0c:02.0
a8300000-a830ffff : tg3
a8310000-a831ffff : 0000:0c:02.1
a8310000-a831ffff : tg3
a8400000-a8400fff : 0000:0a:00.0
a8400000-a8400027 : shpchp
a8500000-aa4fffff : PCI Bus #08
aa500000-ac4fffff : PCI Bus #06
ac500000-ae4fffff : PCI Bus #03
ae500000-b04fffff : PCI Bus #01
b0500000-b05003ff : 0000:00:1d.7
b0500000-b05003ff : ehci_hcd
fffa0000-fffabfff : reserved
fffe0000-ffffffff : 0000:10:00.0
100000000-27fffffff : System RAM
[-- Attachment #6: ioports.0 --]
[-- Type: application/octet-stream, Size: 951 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : libata
01f0-01f7 : libata
02f8-02ff : serial
03c0-03df : vesafb
03f8-03ff : serial
0400-047f : 0000:00:1f.0
0400-0403 : PM1a_EVT_BLK
0404-0405 : PM1a_CNT_BLK
0408-040b : PM_TMR
0410-0415 : ACPI CPU throttle
0428-042f : GPE0_BLK
0480-04bf : 0000:00:1f.0
0cf8-0cff : PCI conf1
2000-2fff : PCI Bus #10
2000-20ff : 0000:10:00.0
3000-3fff : PCI Bus #0d
3000-3fff : PCI Bus #0e
3000-30ff : 0000:0e:05.1
3100-31ff : 0000:0e:05.0
4000-4fff : PCI Bus #08
5000-5fff : PCI Bus #06
6000-6fff : PCI Bus #03
7000-7fff : PCI Bus #01
8000-801f : 0000:00:1f.3
8020-803f : 0000:00:1d.2
8020-803f : uhci_hcd
8040-805f : 0000:00:1d.1
8040-805f : uhci_hcd
8060-807f : 0000:00:1d.0
8060-807f : uhci_hcd
8080-808f : 0000:00:1f.2
8080-808f : libata
[-- Attachment #7: ioports.1 --]
[-- Type: application/octet-stream, Size: 951 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : libata
01f0-01f7 : libata
02f8-02ff : serial
03c0-03df : vesafb
03f8-03ff : serial
0400-047f : 0000:00:1f.0
0400-0403 : PM1a_EVT_BLK
0404-0405 : PM1a_CNT_BLK
0408-040b : PM_TMR
0410-0415 : ACPI CPU throttle
0428-042f : GPE0_BLK
0480-04bf : 0000:00:1f.0
0cf8-0cff : PCI conf1
2000-2fff : PCI Bus #10
2000-20ff : 0000:10:00.0
3000-3fff : PCI Bus #0d
3000-3fff : PCI Bus #0e
3000-30ff : 0000:0e:05.1
3100-31ff : 0000:0e:05.0
4000-4fff : PCI Bus #08
5000-5fff : PCI Bus #06
6000-6fff : PCI Bus #03
7000-7fff : PCI Bus #01
8000-801f : 0000:00:1f.3
8020-803f : 0000:00:1d.2
8020-803f : uhci_hcd
8040-805f : 0000:00:1d.1
8040-805f : uhci_hcd
8060-807f : 0000:00:1d.0
8060-807f : uhci_hcd
8080-808f : 0000:00:1f.2
8080-808f : libata
[-- Attachment #8: lspci-vt.0 --]
[-- Type: application/octet-stream, Size: 5106 bytes --]
-[0000:00]-+-00.0 Intel Corporation E8500/E8501 Hub Interface 1.5
+-01.0-[0000:01-02]--
+-02.0-[0000:03-04]--
+-03.0-[0000:05]--
+-04.0-[0000:06-07]--
+-05.0-[0000:08-09]--
+-06.0-[0000:0a-0c]--+-00.0-[0000:0b]--
| \-00.2-[0000:0c]--+-02.0 Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
| \-02.1 Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
+-07.0-[0000:0d-0f]--+-00.0-[0000:0e]--+-05.0 LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI
| | \-05.1 LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI
| \-00.2-[0000:0f]--
+-08.0 Intel Corporation E8500/E8501 IMI Registers
+-09.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-09.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-09.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-09.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-09.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-09.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-09.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-09.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0a.0 Intel Corporation E8500/E8501 IMI Registers
+-0b.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-0b.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-0b.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-0b.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-0b.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0b.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0b.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0b.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0c.0 Intel Corporation E8500/E8501 IMI Registers
+-0d.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-0d.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-0d.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-0d.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-0d.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0d.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0d.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0d.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0e.0 Intel Corporation E8500/E8501 IMI Registers
+-0f.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-0f.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-0f.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-0f.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-0f.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0f.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0f.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0f.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-10.0 Intel Corporation E8500/E8501 FSB Registers
+-10.1 Intel Corporation E8500/E8501 Address Mapping Registers
+-10.2 Intel Corporation E8500/E8501 RAS Registers
+-11.0 Intel Corporation E8500/E8501 Reserved Registers
+-11.1 Intel Corporation E8500/E8501 Reserved Registers
+-11.2 Intel Corporation E8500/E8501 Miscellaneous Registers
+-13.0 Intel Corporation E8500/E8501 Reserved Registers
+-13.1 Intel Corporation E8500/E8501 Reserved Registers
+-13.2 Intel Corporation E8500/E8501 Reserved Registers
+-13.3 Intel Corporation E8500/E8501 Reserved Registers
+-13.4 Intel Corporation E8500/E8501 Reserved Registers
+-13.5 Intel Corporation E8500/E8501 Reserved Registers
+-13.6 Intel Corporation E8500/E8501 Reserved Registers
+-13.7 Intel Corporation E8500/E8501 Reserved Registers
+-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
+-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
+-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
+-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
+-1e.0-[0000:10]----00.0 ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
+-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
+-1f.2 Intel Corporation 82801EB (ICH5) SATA Controller
\-1f.3 Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller
[-- Attachment #9: lspci-vt.1 --]
[-- Type: application/octet-stream, Size: 5106 bytes --]
-[0000:00]-+-00.0 Intel Corporation E8500/E8501 Hub Interface 1.5
+-01.0-[0000:01-02]--
+-02.0-[0000:03-04]--
+-03.0-[0000:05]--
+-04.0-[0000:06-07]--
+-05.0-[0000:08-09]--
+-06.0-[0000:0a-0c]--+-00.0-[0000:0b]--
| \-00.2-[0000:0c]--+-02.0 Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
| \-02.1 Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
+-07.0-[0000:0d-0f]--+-00.0-[0000:0e]--+-05.0 LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI
| | \-05.1 LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI
| \-00.2-[0000:0f]--
+-08.0 Intel Corporation E8500/E8501 IMI Registers
+-09.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-09.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-09.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-09.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-09.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-09.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-09.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-09.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0a.0 Intel Corporation E8500/E8501 IMI Registers
+-0b.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-0b.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-0b.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-0b.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-0b.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0b.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0b.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0b.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0c.0 Intel Corporation E8500/E8501 IMI Registers
+-0d.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-0d.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-0d.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-0d.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-0d.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0d.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0d.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0d.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0e.0 Intel Corporation E8500/E8501 IMI Registers
+-0f.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-0f.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-0f.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-0f.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-0f.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0f.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0f.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0f.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-10.0 Intel Corporation E8500/E8501 FSB Registers
+-10.1 Intel Corporation E8500/E8501 Address Mapping Registers
+-10.2 Intel Corporation E8500/E8501 RAS Registers
+-11.0 Intel Corporation E8500/E8501 Reserved Registers
+-11.1 Intel Corporation E8500/E8501 Reserved Registers
+-11.2 Intel Corporation E8500/E8501 Miscellaneous Registers
+-13.0 Intel Corporation E8500/E8501 Reserved Registers
+-13.1 Intel Corporation E8500/E8501 Reserved Registers
+-13.2 Intel Corporation E8500/E8501 Reserved Registers
+-13.3 Intel Corporation E8500/E8501 Reserved Registers
+-13.4 Intel Corporation E8500/E8501 Reserved Registers
+-13.5 Intel Corporation E8500/E8501 Reserved Registers
+-13.6 Intel Corporation E8500/E8501 Reserved Registers
+-13.7 Intel Corporation E8500/E8501 Reserved Registers
+-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
+-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
+-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
+-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
+-1e.0-[0000:10]----00.0 ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
+-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
+-1f.2 Intel Corporation 82801EB (ICH5) SATA Controller
\-1f.3 Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller
[-- Attachment #10: lspci-vvv.0 --]
[-- Type: application/octet-stream, Size: 44790 bytes --]
00:00.0 Host bridge: Intel Corporation E8500/E8501 Hub Interface 1.5 (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
00:01.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port D (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: ae500000-b04fffff
Prefetchable memory behind bridge: 0000000098000000-000000009bffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40b9
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 1
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 3, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:02.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x8 Port C (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: ac500000-ae4fffff
Prefetchable memory behind bridge: 000000009c000000-000000009fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40c1
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 2
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 1, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:03.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port C1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40c9
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 3
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Root: Correctable- Non-Fatal- Fatal- PME-
00:04.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port B0 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: aa500000-ac4fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000a3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40d1
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 4
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 4, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:05.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port B1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: a8500000-aa4fffff
Prefetchable memory behind bridge: 00000000a4000000-00000000a7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40d9
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 5
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 5, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:06.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port A0 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0c, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a8300000-a84fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40e1
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 256 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 6
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Root: Correctable- Non-Fatal- Fatal- PME-
00:07.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port A1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0f, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a8100000-a82fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40e9
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 256 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 7
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Root: Correctable- Non-Fatal- Fatal- PME-
00:08.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0a.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0c.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0e.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.0 Host bridge: Intel Corporation E8500/E8501 FSB Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.1 Host bridge: Intel Corporation E8500/E8501 Address Mapping Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.2 Host bridge: Intel Corporation E8500/E8501 RAS Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:11.0 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:11.1 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:11.2 Host bridge: Intel Corporation E8500/E8501 Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.0 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.1 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.2 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.3 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.4 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.5 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.6 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.7 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 50
Region 4: I/O ports at 8060 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 58
Region 4: I/O ports at 8040 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 66
Region 4: I/O ports at 8020 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 106
Region 0: Memory at b0500000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: a8000000-a80fffff
Prefetchable memory behind bridge: 90000000-97ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 66
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at 8080 [size=16]
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 8000 [size=32]
0a:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at a8400000 (64-bit, non-prefetchable) [size=4K]
Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=48
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [78] #0c [0009]
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
Status: Dev=0a:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0a:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0a, secondary=0c, subordinate=0c, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a8300000-a83fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=0a:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0c:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 90
Region 0: Memory at a8300000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at a8320000 [disabled] [size=128K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=1
Status: Dev=0c:02.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: ddff49f7d06e6df8 Data: ad6f
0c:02.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 98
Region 0: Memory at a8310000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=1
Status: Dev=0c:02.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: 9ecc10f2c2609318 Data: 2c68
0d:00.0 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor (A-Segment Bridge) (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0d, secondary=0e, subordinate=0e, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a8100000-a81fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=0d:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0d:00.2 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor (B-Segment Bridge) (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0d, secondary=0f, subordinate=0f, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=0d:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0e:05.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 74
Region 0: I/O ports at 3100 [size=256]
Region 1: Memory at a8100000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at a8110000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=0e:05.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=8 DMCRS=16 RSCEM- 266MHz- 533MHz-
0e:05.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 82
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at a8120000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at a8130000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=0e:05.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=8 DMCRS=16 RSCEM- 266MHz- 533MHz-
10:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 90000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at a8000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fffe0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[-- Attachment #11: dmesg.0 --]
[-- Type: application/octet-stream, Size: 35433 bytes --]
Bootdata ok (command line is root=/dev/sda8 vga=0x31a video=vesafb:mtrr:3 splash=verbose noresume)
Linux version 2.6.16.54-2007-11-14-jb (jbeulich@dus-dev-sles10t) (gcc version 4.1.2 20070115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 19 17:39:36 CET 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f89c000 (usable)
BIOS-e820: 000000007f89c000 - 000000007f912000 (reserved)
BIOS-e820: 000000007f912000 - 000000007f939000 (usable)
BIOS-e820: 000000007f939000 - 000000007f93a000 (reserved)
BIOS-e820: 000000007f93a000 - 000000007f944000 (usable)
BIOS-e820: 000000007f944000 - 000000007f977000 (reserved)
BIOS-e820: 000000007f977000 - 000000007f9f8000 (ACPI NVS)
BIOS-e820: 000000007f9f8000 - 000000007fa12000 (reserved)
BIOS-e820: 000000007fa12000 - 000000007fa6b000 (usable)
BIOS-e820: 000000007fa6b000 - 000000007fa92000 (reserved)
BIOS-e820: 000000007fa92000 - 000000007fb06000 (usable)
BIOS-e820: 000000007fb06000 - 000000007fb12000 (ACPI NVS)
BIOS-e820: 000000007fb12000 - 000000007fb18000 (usable)
BIOS-e820: 000000007fb18000 - 000000007fb32000 (ACPI data)
BIOS-e820: 000000007fb32000 - 000000007fb33000 (reserved)
BIOS-e820: 000000007fb33000 - 000000007fb7a000 (usable)
BIOS-e820: 000000007fb7a000 - 000000007fbfa000 (reserved)
BIOS-e820: 000000007fbfa000 - 000000007fc00000 (usable)
BIOS-e820: 00000000fffa0000 - 00000000fffac000 (reserved)
BIOS-e820: 0000000100000000 - 0000000280000000 (usable)
DMI 2.3 present.
ACPI: RSDP (v002 INTEL ) @ 0x00000000000f03d0
ACPI: XSDT (v001 INTEL SHW40M 0x00000002 MSFT 0x01000013) @ 0x000000007fb31f30
ACPI: FADT (v003 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb2fd90
ACPI: MADT (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb2fc10
ACPI: SRAT (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb20f90
ACPI: MCFG (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb20f10
ACPI: SPCR (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb20e90
ACPI: SSDT (v001 INTEL SHW40M 0x00004000 INTL 0x20030918) @ 0x000000007fb1e010
ACPI: SSDT (v001 INTEL SHW40M 0x00004004 INTL 0x20030918) @ 0x000000007fb1c010
ACPI: SSDT (v001 INTEL SHW40M 0x00004008 INTL 0x20030918) @ 0x000000007fb1a010
ACPI: SSDT (v001 INTEL SHW40M 0x0000400c INTL 0x20030918) @ 0x000000007fb18010
ACPI: DSDT (v001 INTEL SHW40M 0x00000002 INTL 0x20030918) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000280000000
Bootmem setup node 0 0000000000000000-0000000280000000
On node 0 totalpages: 2058801
DMA zone: 3084 pages, LIFO batch:0
DMA32 zone: 504357 pages, LIFO batch:31
Normal zone: 1551360 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x08] enabled)
Processor #8 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x0e] enabled)
Processor #14 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] enabled)
Processor #0 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x06] enabled)
Processor #6 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x0a] enabled)
Processor #10 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] enabled)
Processor #12 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x02] enabled)
Processor #2 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x04] enabled)
Processor #4 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x09] enabled)
Processor #9 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0f] enabled)
Processor #15 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
Processor #1 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x07] enabled)
Processor #7 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x0b] enabled)
Processor #11 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0d] enabled)
Processor #13 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled)
Processor #3 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled)
Processor #5 15:6 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec85000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec85000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec85800] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec85800, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec86000] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec86000, GSI 72-95
ACPI: IOAPIC (id[0x0c] address[0xfec86800] gsi_base[96])
IOAPIC[4]: apic_id 12, version 32, address 0xfec86800, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to clustered
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7fc00000:803a0000)
Built 1 zonelists
Kernel command line: root=/dev/sda8 vga=0x31a video=vesafb:mtrr:3 splash=verbose noresume
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 3391.586 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x1d14000 - 0x5d14000
Nosave address range: 000000000009f000 - 0000000000100000
Nosave address range: 000000007f89c000 - 000000007f912000
Nosave address range: 000000007f939000 - 000000007f93a000
Nosave address range: 000000007f944000 - 000000007f977000
Nosave address range: 000000007f977000 - 000000007f9f8000
Nosave address range: 000000007f9f8000 - 000000007fa12000
Nosave address range: 000000007fa6b000 - 000000007fa92000
Nosave address range: 000000007fb06000 - 000000007fb12000
Nosave address range: 000000007fb18000 - 000000007fb32000
Nosave address range: 000000007fb32000 - 000000007fb33000
Nosave address range: 000000007fb7a000 - 000000007fbfa000
Nosave address range: 000000007fc00000 - 00000000fffa0000
Nosave address range: 00000000fffa0000 - 00000000fffac000
Nosave address range: 00000000fffac000 - 0000000100000000
Memory: 8152836k/10485760k available (1776k kernel code, 229164k reserved, 742k data, 196k init)
Calibrating delay using timer specific routine.. 6797.41 BogoMIPS (lpj=13594831)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
checking if image is initramfs... it is
Freeing initrd memory: 3008k freed
not found!
Using local APIC timer interrupts.
result 12469023
Detected 12.469 MHz APIC timer.
Booting processor 1/16 APIC 0x8
Initializing CPU#1
Calibrating delay using timer specific routine.. 6783.69 BogoMIPS (lpj=13567385)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 2/16 APIC 0xe
Initializing CPU#2
Calibrating delay using timer specific routine.. 6783.52 BogoMIPS (lpj=13567050)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
CPU2: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 3/16 APIC 0x6
Initializing CPU#3
Calibrating delay using timer specific routine.. 6783.63 BogoMIPS (lpj=13567278)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 4/16 APIC 0xa
Initializing CPU#4
Calibrating delay using timer specific routine.. 6783.66 BogoMIPS (lpj=13567329)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
CPU4: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 5/16 APIC 0xc
Initializing CPU#5
Calibrating delay using timer specific routine.. 6783.58 BogoMIPS (lpj=13567179)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU5: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 6/16 APIC 0x2
Initializing CPU#6
Calibrating delay using timer specific routine.. 6783.61 BogoMIPS (lpj=13567239)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU6: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 7/16 APIC 0x4
Initializing CPU#7
Calibrating delay using timer specific routine.. 6783.54 BogoMIPS (lpj=13567091)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU7: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 8/16 APIC 0x9
Initializing CPU#8
Calibrating delay using timer specific routine.. 6783.73 BogoMIPS (lpj=13567475)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
CPU8: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 9/16 APIC 0xf
Initializing CPU#9
Calibrating delay using timer specific routine.. 6783.68 BogoMIPS (lpj=13567375)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
CPU9: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 10/16 APIC 0x1
Initializing CPU#10
Calibrating delay using timer specific routine.. 6783.75 BogoMIPS (lpj=13567500)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU10: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 11/16 APIC 0x7
Initializing CPU#11
Calibrating delay using timer specific routine.. 6783.65 BogoMIPS (lpj=13567318)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU11: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 12/16 APIC 0xb
Initializing CPU#12
Calibrating delay using timer specific routine.. 6783.82 BogoMIPS (lpj=13567640)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
CPU12: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 13/16 APIC 0xd
Initializing CPU#13
Calibrating delay using timer specific routine.. 6783.60 BogoMIPS (lpj=13567203)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU13: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 14/16 APIC 0x3
Initializing CPU#14
Calibrating delay using timer specific routine.. 6783.71 BogoMIPS (lpj=13567439)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU14: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 15/16 APIC 0x5
Initializing CPU#15
Calibrating delay using timer specific routine.. 6783.73 BogoMIPS (lpj=13567465)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU15: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Brought up 16 CPUs
testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)!
migration_cost=28,9136
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: BIOS Bug: MCFG area is not E820-reserved
PCI: Not using MMCONFIG.
ACPI: Subsystem revision 20060127
ACPI Error (evgpeblk-0284): Unknown GPE method type: NTF_ (name not of form _Lxx or _Exx) [20060127]
ACPI Error (evgpeblk-0284): Unknown GPE method type: PNTS (name not of form _Lxx or _Exx) [20060127]
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [TNB] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
Boot video device is 0000:10:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.ICHB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 9 10 11 12)
ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI7.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI7.PXHB._PRT]
ACPI: Device [M1] status [0000000c]: functional but not present; setting present
ACPI: Device [M2] status [0000000c]: functional but not present; setting present
ACPI: Device [M3] status [0000000c]: functional but not present; setting present
ACPI: Device [M4] status [0000000c]: functional but not present; setting present
ACPI: Device [M5] status [0000000c]: functional but not present; setting present
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: 7000-7fff
MEM window: ae500000-b04fffff
PREFETCH window: 98000000-9bffffff
PCI: Bridge: 0000:00:02.0
IO window: 6000-6fff
MEM window: ac500000-ae4fffff
PREFETCH window: 9c000000-9fffffff
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: 5000-5fff
MEM window: aa500000-ac4fffff
PREFETCH window: a0000000-a3ffffff
PCI: Bridge: 0000:00:05.0
IO window: 4000-4fff
MEM window: a8500000-aa4fffff
PREFETCH window: a4000000-a7ffffff
PCI: Bridge: 0000:0a:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:0a:00.2
IO window: disabled.
MEM window: a8300000-a83fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: a8300000-a84fffff
PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:100000@a8200000 for 0000:0e:05.0
PCI: Failed to allocate mem resource #6:100000@a8200000 for 0000:0e:05.1
PCI: Bridge: 0000:0d:00.0
IO window: 3000-3fff
MEM window: a8100000-a81fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:0d:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: 3000-3fff
MEM window: a8100000-a82fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: a8000000-a80fffff
PREFETCH window: 90000000-97ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 47 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:0a:00.0 to 64
PCI: Setting latency timer of device 0000:0a:00.2 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:0d:00.0 to 64
PCI: Setting latency timer of device 0000:0d:00.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie02]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie02]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie02]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
vesafb: framebuffer at 0x90000000, mapped to 0xffffc20000080000, using 5120k, total 16384k
vesafb: mode is 1280x1024x16, linelength=2560, pages=5
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Freeing unused kernel memory: 196k freed
Write protecting the kernel read-only data: 330k
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
GSI 17 sharing vector 0x32 and IRQ 17
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 50, io base 0x00008060
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.54-2007-11-14-jb uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
GSI 18 sharing vector 0x3A and IRQ 18
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 58, io base 0x00008040
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.54-2007-11-14-jb uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 19 sharing vector 0x42 and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 66, io base 0x00008020
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16.54-2007-11-14-jb uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: new device found, idVendor=0424, idProduct=a700
usb 2-1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 3 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 2
Fusion MPT base driver 3.04.06-suse
Copyright (c) 1999-2007 LSI Corporation
usb 3-1: new device found, idVendor=0557, idProduct=2220
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: ATEN CS-1758/54
usb 3-1: Manufacturer: ATEN
usb 3-1: configuration #1 chosen from 1 choice
Fusion MPT SPI Host driver 3.04.06-suse
GSI 20 sharing vector 0x4A and IRQ 20
ACPI: PCI Interrupt 0000:0e:05.0[A] -> GSI 72 (level, low) -> IRQ 74
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=74
Vendor: MAXTOR Model: ATLAS10K5_73SCA Rev: JNZH
Type: Direct-Access ANSI SCSI revision: 03
target0:0:0: Beginning Domain Validation
target0:0:0: Ending Domain Validation
target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127)
SCSI device sda: 143666192 512-byte hdwr sectors (73557 MB)
sda: Write Protect is off
sda: Mode Sense: bf 00 10 08
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 143666192 512-byte hdwr sectors (73557 MB)
sda: Write Protect is off
sda: Mode Sense: bf 00 10 08
SCSI device sda: drive cache: write back w/ FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Vendor: ESG-SHV Model: SCA HSBP M35 Rev: 1.07
Type: Processor ANSI SCSI revision: 02
target0:0:6: Beginning Domain Validation
target0:0:6: Ending Domain Validation
target0:0:6: asynchronous
0:0:6:0: Attached scsi generic sg1 type 3
GSI 21 sharing vector 0x52 and IRQ 21
ACPI: PCI Interrupt 0000:0e:05.1[B] -> GSI 73 (level, low) -> IRQ 82
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=82
Vendor: ESG-SHV Model: SCA HSBP M35 Rev: 1.07
Losing some ticks... checking if CPU frequency changed.
Type: Processor ANSI SCSI revision: 02
target1:0:6: Beginning Domain Validation
target1:0:6: Ending Domain Validation
target1:0:6: asynchronous
1:0:6:0: Attached scsi generic sg2 type 3
Vendor: MAXTOR Model: ATLAS10K5_73SCA Rev: JNZH
Type: Direct-Access ANSI SCSI revision: 03
target1:0:10: Beginning Domain Validation
target1:0:10: Ending Domain Validation
target1:0:10: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127)
SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB)
sdb: Write Protect is off
sdb: Mode Sense: bf 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB)
sdb: Write Protect is off
sdb: Mode Sense: bf 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
sdb: sdb1 sdb2
sd 1:0:10:0: Attached scsi disk sdb
sd 1:0:10:0: Attached scsi generic sg3 type 0
usbcore: registered new driver hiddev
input: ATEN ATEN CS-1758/54 as /class/input/input1
input: USB HID v1.10 Keyboard [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
input: ATEN ATEN CS-1758/54 as /class/input/input2
input: USB HID v1.10 Mouse [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
usbcore: registered new driver usbhid
/home/jbeulich/cpp/kernel/sle10sp2-2007-11-14/drivers/usb/input/hid-core.c: v2.6:USB HID core driver
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00ac7
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x8080 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x8088 irq 15
scsi2 : ata_piix
ata1.00: ATAPI, max UDMA/33
ata1.00: configured for UDMA/33
scsi3 : ata_piix
ATA: abnormal status 0x7F on port 0x177
Vendor: QSI Model: DVD-ROM SDR-083 Rev: MX13
Type: CD-ROM ANSI SCSI revision: 05
2:0:0:0: Attached scsi generic sg4 type 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda8: found reiserfs format "3.6" with standard journal
ReiserFS: sda8: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda8: checking transaction log (sda8)
ReiserFS: sda8: Using r5 hash to sort names
Adding 4200956k swap on /dev/sdb1. Priority:-1 extents:1 across:4200956k
Fusion MPT misc device (ioctl) driver 3.04.06-suse
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
tg3.c:v3.71b (December 15, 2006)
GSI 22 sharing vector 0x5A and IRQ 22
ACPI: PCI Interrupt 0000:0c:02.0[A] -> GSI 48 (level, low) -> IRQ 90
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
eth0: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0e:0c:43:43:45
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0]
eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
GSI 23 sharing vector 0x62 and IRQ 23
ACPI: PCI Interrupt 0000:0c:02.1[B] -> GSI 49 (level, low) -> IRQ 98
GSI 24 sharing vector 0x6A and IRQ 24
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 106
hw_random: RNG not detected
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: irq 106, io mem 0xb0500000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.16.54-2007-11-14-jb ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
eth1: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0e:0c:43:43:46
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
usb 3-1: USB disconnect, address 2
shpchp: HPC vendor_id 8086 device_id 329 ss_vid 0 ss_did 0
ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 47 (level, low) -> IRQ 169
usb 4-3: new high speed USB device using ehci_hcd and address 2
usb 4-3: new device found, idVendor=0424, idProduct=a700
usb 4-3: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-3: configuration #1 chosen from 1 choice
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 3 ports detected
shpchp: Can't get msi for the hotplug controller
shpchp: Use INTx for the hotplug controller
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
eth0 renamed to eth3
eth1 renamed to eth2
usb 2-1: USB disconnect, address 2
usb 3-1: new low speed USB device using uhci_hcd and address 3
usb 3-1: new device found, idVendor=0557, idProduct=2220
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: ATEN CS-1758/54
usb 3-1: Manufacturer: ATEN
usb 3-1: configuration #1 chosen from 1 choice
input: ATEN ATEN CS-1758/54 as /class/input/input3
input: USB HID v1.10 Keyboard [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
input: ATEN ATEN CS-1758/54 as /class/input/input4
input: USB HID v1.10 Mouse [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
loop: loaded (max 8 devices)
ReiserFS: sda9: found reiserfs format "3.6" with standard journal
ReiserFS: sda9: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda9: checking transaction log (sda9)
ReiserFS: sda9: Using r5 hash to sort names
ReiserFS: sda10: found reiserfs format "3.6" with standard journal
ReiserFS: sda10: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda10: journal params: device sda10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda10: checking transaction log (sda10)
ReiserFS: sda10: Using r5 hash to sort names
ReiserFS: sdb2: found reiserfs format "3.6" with standard journal
ReiserFS: sdb2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdb2: checking transaction log (sdb2)
ReiserFS: sdb2: Using r5 hash to sort names
ReiserFS: sda5: found reiserfs format "3.6" with standard journal
ReiserFS: sda5: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda5: checking transaction log (sda5)
ReiserFS: sda5: Using r5 hash to sort names
ReiserFS: sda6: found reiserfs format "3.6" with standard journal
ReiserFS: sda6: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda6: checking transaction log (sda6)
ReiserFS: sda6: Using r5 hash to sort names
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda7: checking transaction log (sda7)
ReiserFS: sda7: Using r5 hash to sort names
ACPI: Power Button (FF) [PWRF]
tg3: eth3: Link is up at 100 Mbps, half duplex.
tg3: eth3: Flow control is off for TX and off for RX.
IA-32 Microcode Update Driver: v1.14b <tigran@veritas.com>
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6 over IPv4 tunneling driver
IA-32 Microcode Update Driver v1.14b unregistered
acpi-cpufreq: CPU0 - ACPI performance management activated.
acpi-cpufreq: CPU1 - ACPI performance management activated.
acpi-cpufreq: CPU2 - ACPI performance management activated.
acpi-cpufreq: CPU3 - ACPI performance management activated.
acpi-cpufreq: CPU4 - ACPI performance management activated.
acpi-cpufreq: CPU5 - ACPI performance management activated.
acpi-cpufreq: CPU6 - ACPI performance management activated.
acpi-cpufreq: CPU7 - ACPI performance management activated.
acpi-cpufreq: CPU8 - ACPI performance management activated.
acpi-cpufreq: CPU9 - ACPI performance management activated.
acpi-cpufreq: CPU10 - ACPI performance management activated.
acpi-cpufreq: CPU11 - ACPI performance management activated.
acpi-cpufreq: CPU12 - ACPI performance management activated.
acpi-cpufreq: CPU13 - ACPI performance management activated.
acpi-cpufreq: CPU14 - ACPI performance management activated.
acpi-cpufreq: CPU15 - ACPI performance management activated.
eth3: no IPv6 routers present
next prev parent reply other threads:[~2007-11-27 9:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4742CB2C.76E4.0078.0@novell.com>
[not found] ` <20071120174945.GA6024@us.ibm.com>
[not found] ` <47440D1F.76E4.0078.0@novell.com>
2007-11-26 21:59 ` Avoid creating P2P prefetch window for expansion ROMs Gary Hade
2007-11-26 22:15 ` Greg KH
2007-11-26 22:46 ` Gary Hade
2007-12-12 1:08 ` Gary Hade
2007-11-27 9:28 ` Jan Beulich [this message]
2007-11-27 19:17 ` Gary Hade
2007-11-20 10:49 Jan Beulich
2007-11-20 23:14 ` Greg KH
2007-11-21 8:53 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=474BF149.76E4.0078.0@novell.com \
--to=jbeulich@novell.com \
--cc=garyhade@us.ibm.com \
--cc=gregkh@suse.de \
--cc=lcm@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).