From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754614AbcKUOQx (ORCPT ); Mon, 21 Nov 2016 09:16:53 -0500 Received: from smtpout.microchip.com ([198.175.253.82]:41430 "EHLO email.microchip.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753680AbcKUOQv (ORCPT ); Mon, 21 Nov 2016 09:16:51 -0500 From: Cyrille Pitchen To: , , , , CC: , , Cyrille Pitchen Subject: [PATCH v4 2/8] mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address op codes Date: Mon, 21 Nov 2016 15:15:41 +0100 Message-ID: <47b7bf0ec441753e55786d39f8152218d3052ae3.1479736401.git.cyrille.pitchen@atmel.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: References: MIME-Version: 1.0 Content-Type: text/plain X-Brightmail-Tracker: H4sIAAAAAAAAC+NgFtrNrMTGxcLF5cOie4nROMJgx+VpbcwWHVNWMVlcn7eP2eL+tdMsFhva1zJZ3Pu0jdFi2vR3zA5sAQxRrJl5SfkVCawZ6x5fYC9o86jYNvcMUwPjDasuRi4OIYH1jBKPFr1h6WLk5GATMJR4++AoK0hCRGAio8TJyV9YQRLMAlkSvWdms4HYwgJxEj8XL2AEsVkEVCU+//oAVsMrEC9x8NpOsEESAnISN891MoPYnAK2EisWrASrFxKwkXhzYSEjRL2gxMmZT1gg5ktIHHzxghmiRk1iYcsKZog5gRK3Hqxnh7CdJHYunwo1307i8PSLUHEHiaW/58DVtC99wwpha0tsf7UPytaR2HawH6rXVmLPjIlMELa7xINHy6FsX4lZDxugaqIk3s47xTKBUWIWklNnITl1ASPTKkZpZw8/3eAwXdcIZw8DU73c5IwC3dzEzDy95PzcTYyQ2Mrawdg7yV+qgdGWqbcq63/1Dev7JaIZ/sZr7iVJTRC+u2gFZ/wKuwsx6yf9mj3l7XXn/QzXbb9vcRP3roq62tO6b4fbzPd2S5/e0q26P3ELZwzrGd4PB6Jj0g+8fiwhfsPGMleyflfzN1nZIrEZ0w+lvE0NiHF4deHkH83Mf/M8LzxM4/0ea3T9a76w0uIpkTuVWIozEg21mIuKEwEdMM16TgIAAA== Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch renames the SPINOR_OP_* macros of the 4-byte address instruction set so the new names all share a common pattern: the 4-byte address name is built from the 3-byte address name appending the "_4B" suffix. The patch also introduces new op codes to support other SPI protocols such as SPI 1-4-4 and SPI 1-2-2. This is a transitional patch and will help a later patch of spi-nor.c to automate the translation from the 3-byte address op codes into their 4-byte address version. Signed-off-by: Cyrille Pitchen --- drivers/mtd/devices/serial_flash_cmds.h | 7 ------- drivers/mtd/devices/st_spi_fsm.c | 28 ++++++++++++++-------------- drivers/mtd/spi-nor/spi-nor.c | 8 ++++---- drivers/spi/spi-bcm-qspi.c | 6 +++--- include/linux/mtd/spi-nor.h | 22 ++++++++++++++++------ 5 files changed, 37 insertions(+), 34 deletions(-) diff --git a/drivers/mtd/devices/serial_flash_cmds.h b/drivers/mtd/devices/serial_flash_cmds.h index f59a125295d0..8b81e15105dd 100644 --- a/drivers/mtd/devices/serial_flash_cmds.h +++ b/drivers/mtd/devices/serial_flash_cmds.h @@ -18,19 +18,12 @@ #define SPINOR_OP_RDVCR 0x85 /* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */ -#define SPINOR_OP_READ_1_2_2 0xbb /* DUAL I/O READ */ -#define SPINOR_OP_READ_1_4_4 0xeb /* QUAD I/O READ */ - #define SPINOR_OP_WRITE 0x02 /* PAGE PROGRAM */ #define SPINOR_OP_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */ #define SPINOR_OP_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */ #define SPINOR_OP_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */ #define SPINOR_OP_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */ -/* READ commands with 32-bit addressing */ -#define SPINOR_OP_READ4_1_2_2 0xbc -#define SPINOR_OP_READ4_1_4_4 0xec - /* Configuration flags */ #define FLASH_FLAG_SINGLE 0x000000ff #define FLASH_FLAG_READ_WRITE 0x00000001 diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c index 5454b4113589..804313a33f2b 100644 --- a/drivers/mtd/devices/st_spi_fsm.c +++ b/drivers/mtd/devices/st_spi_fsm.c @@ -507,13 +507,13 @@ static struct seq_rw_config n25q_read3_configs[] = { * - 'FAST' variants configured for 8 dummy cycles (see note above.) */ static struct seq_rw_config n25q_read4_configs[] = { - {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, - {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0}, - {0x00, 0, 0, 0, 0, 0x00, 0, 0}, + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B, 0, 4, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B, 0, 1, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B, 0, 2, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST_4B, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ_4B, 0, 1, 1, 0x00, 0, 0}, + {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; /* @@ -553,13 +553,13 @@ static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq) * entering a state that is incompatible with the SPIBoot Controller. */ static struct seq_rw_config stfsm_s25fl_read4_configs[] = { - {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 2, 4}, - {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8}, - {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 4, 0}, - {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8}, - {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8}, - {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0}, - {0x00, 0, 0, 0, 0, 0x00, 0, 0}, + {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B, 0, 4, 4, 0x00, 2, 4}, + {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B, 0, 1, 4, 0x00, 0, 8}, + {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B, 0, 2, 2, 0x00, 4, 0}, + {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B, 0, 1, 2, 0x00, 0, 8}, + {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST_4B, 0, 1, 1, 0x00, 0, 8}, + {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ_4B, 0, 1, 1, 0x00, 0, 0}, + {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; static struct seq_rw_config stfsm_s25fl_write4_configs[] = { diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 7ff807211e1e..8a190122b13f 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -1480,16 +1480,16 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) /* Dedicated 4-byte command set */ switch (nor->flash_read) { case SPI_NOR_QUAD: - nor->read_opcode = SPINOR_OP_READ4_1_1_4; + nor->read_opcode = SPINOR_OP_READ_1_1_4_4B; break; case SPI_NOR_DUAL: - nor->read_opcode = SPINOR_OP_READ4_1_1_2; + nor->read_opcode = SPINOR_OP_READ_1_1_2_4B; break; case SPI_NOR_FAST: - nor->read_opcode = SPINOR_OP_READ4_FAST; + nor->read_opcode = SPINOR_OP_READ_FAST_4B; break; case SPI_NOR_NORMAL: - nor->read_opcode = SPINOR_OP_READ4; + nor->read_opcode = SPINOR_OP_READ_4B; break; } nor->program_opcode = SPINOR_OP_PP_4B; diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c index 14f9dea3173f..d7843fd8c610 100644 --- a/drivers/spi/spi-bcm-qspi.c +++ b/drivers/spi/spi-bcm-qspi.c @@ -371,7 +371,7 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width, /* default mode, does not need flex_cmd */ flex_mode = 0; else - command = SPINOR_OP_READ4_FAST; + command = SPINOR_OP_READ_FAST_4B; break; case SPI_NBITS_DUAL: bpc = 0x00000001; @@ -384,7 +384,7 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width, } else { command = SPINOR_OP_READ_1_1_2; if (spans_4byte) - command = SPINOR_OP_READ4_1_1_2; + command = SPINOR_OP_READ_1_1_2_4B; } break; case SPI_NBITS_QUAD: @@ -399,7 +399,7 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width, } else { command = SPINOR_OP_READ_1_1_4; if (spans_4byte) - command = SPINOR_OP_READ4_1_1_4; + command = SPINOR_OP_READ_1_1_4_4B; } break; default: diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index c425c7b4c2a0..8b02fd7864d0 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -43,9 +43,13 @@ #define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */ #define SPINOR_OP_READ 0x03 /* Read data bytes (low frequency) */ #define SPINOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */ -#define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual SPI) */ -#define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad SPI) */ +#define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual Output SPI) */ +#define SPINOR_OP_READ_1_2_2 0xbb /* Read data bytes (Dual I/O SPI) */ +#define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad Output SPI) */ +#define SPINOR_OP_READ_1_4_4 0xeb /* Read data bytes (Quad I/O SPI) */ #define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */ +#define SPINOR_OP_PP_1_1_4 0x32 /* Quad page program */ +#define SPINOR_OP_PP_1_4_4 0x38 /* Quad page program */ #define SPINOR_OP_BE_4K 0x20 /* Erase 4KiB block */ #define SPINOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */ #define SPINOR_OP_BE_32K 0x52 /* Erase 32KiB block */ @@ -56,11 +60,17 @@ #define SPINOR_OP_RDFSR 0x70 /* Read flag status register */ /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ -#define SPINOR_OP_READ4 0x13 /* Read data bytes (low frequency) */ -#define SPINOR_OP_READ4_FAST 0x0c /* Read data bytes (high frequency) */ -#define SPINOR_OP_READ4_1_1_2 0x3c /* Read data bytes (Dual SPI) */ -#define SPINOR_OP_READ4_1_1_4 0x6c /* Read data bytes (Quad SPI) */ +#define SPINOR_OP_READ_4B 0x13 /* Read data bytes (low frequency) */ +#define SPINOR_OP_READ_FAST_4B 0x0c /* Read data bytes (high frequency) */ +#define SPINOR_OP_READ_1_1_2_4B 0x3c /* Read data bytes (Dual Output SPI) */ +#define SPINOR_OP_READ_1_2_2_4B 0xbc /* Read data bytes (Dual I/O SPI) */ +#define SPINOR_OP_READ_1_1_4_4B 0x6c /* Read data bytes (Quad Output SPI) */ +#define SPINOR_OP_READ_1_4_4_4B 0xec /* Read data bytes (Quad I/O SPI) */ #define SPINOR_OP_PP_4B 0x12 /* Page program (up to 256 bytes) */ +#define SPINOR_OP_PP_1_1_4_4B 0x34 /* Quad page program */ +#define SPINOR_OP_PP_1_4_4_4B 0x3e /* Quad page program */ +#define SPINOR_OP_BE_4K_4B 0x21 /* Erase 4KiB block */ +#define SPINOR_OP_BE_32K_4B 0x5c /* Erase 32KiB block */ #define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */ /* Used for SST flashes only. */ -- 2.7.4