[PATCH v5 00/17] Introducing AMD x2AVIC and hybrid-AVIC modes

[PATCH v5 00/17] Introducing AMD x2AVIC and hybrid-AVIC modes

[Suravee Suthikulpanit]

Introducing support for AMD x2APIC virtualization. This feature is
indicated by the CPUID Fn8000_000A EDX[14], and it can be activated
by setting bit 31 (enable AVIC) and bit 30 (x2APIC mode) of VMCB
offset 60h.

With x2AVIC support, the guest local APIC can be fully virtualized in
both xAPIC and x2APIC modes, and the mode can be changed during runtime.
For example, when AVIC is enabled, the hypervisor set VMCB bit 31
to activate AVIC for each vCPU. Then, it keeps track of each vCPU's
APIC mode, and updates VMCB bit 30 to enable/disable x2APIC
virtualization mode accordingly.

Besides setting bit VMCB bit 30 and 31, for x2AVIC, kvm_amd driver needs
to disable interception for the x2APIC MSR range to allow AVIC hardware
to virtualize register accesses.

This series also introduce a partial APIC virtualization (hybrid-AVIC)
mode, where APIC register accesses are trapped (i.e. not virtualized
by hardware), but leverage AVIC doorbell for interrupt injection.
This eliminates need to disable x2APIC in the guest on system without
x2AVIC support. (Note: suggested by Maxim)

Testing for v5:
  * Test partial AVIC mode by launching a VM with x2APIC mode
  * Tested booting a Linux VM with x2APIC physical and logical modes upto 512 vCPUs.
  * Test the following nested SVM test use cases:

             L0     |    L1   |   L2
       ----------------------------------
               AVIC |    APIC |    APIC
               AVIC |    APIC |  x2APIC
        hybrid-AVIC |  x2APIC |    APIC
        hybrid-AVIC |  x2APIC |  x2APIC
             x2AVIC |    APIC |    APIC
             x2AVIC |    APIC |  x2APIC
             x2AVIC |  x2APIC |    APIC
             x2AVIC |  x2APIC |  x2APIC

Changes from v4:
(https://lore.kernel.org/lkml/20220508023930.12881-5-suravee.suthikulpanit@amd.com/T/)
  * Patch  3: Move enum_avic_modes definition to svm.h
  * Patch 10: Rename avic_set_x2apic_msr_interception to
              svm_set_x2apic_msr_interception and move it to svm.c
              to simplify the struct svm_direct_access_msrs declaration.
  * Patch 16: New from Maxim 
  * Patch 17: New from Maxim 

Best Regards,
Suravee

Maxim Levitsky (2):
  KVM: x86: nSVM: always intercept x2apic msrs
  KVM: x86: nSVM: optimize svm_set_x2apic_msr_interception

Suravee Suthikulpanit (15):
  x86/cpufeatures: Introduce x2AVIC CPUID bit
  KVM: x86: lapic: Rename [GET/SET]_APIC_DEST_FIELD to
    [GET/SET]_XAPIC_DEST_FIELD
  KVM: SVM: Detect X2APIC virtualization (x2AVIC) support
  KVM: SVM: Update max number of vCPUs supported for x2AVIC mode
  KVM: SVM: Update avic_kick_target_vcpus to support 32-bit APIC ID
  KVM: SVM: Do not support updating APIC ID when in x2APIC mode
  KVM: SVM: Adding support for configuring x2APIC MSRs interception
  KVM: x86: Deactivate APICv on vCPU with APIC disabled
  KVM: SVM: Refresh AVIC configuration when changing APIC mode
  KVM: SVM: Introduce helper functions to (de)activate AVIC and x2AVIC
  KVM: SVM: Do not throw warning when calling avic_vcpu_load on a
    running vcpu
  KVM: SVM: Introduce hybrid-AVIC mode
  KVM: x86: Warning APICv inconsistency only when vcpu APIC mode is
    valid
  KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible
  KVM: SVM: Add AVIC doorbell tracepoint

 arch/x86/hyperv/hv_apic.c          |   2 +-
 arch/x86/include/asm/apicdef.h     |   4 +-
 arch/x86/include/asm/cpufeatures.h |   1 +
 arch/x86/include/asm/kvm_host.h    |   1 -
 arch/x86/include/asm/svm.h         |  16 ++-
 arch/x86/kernel/apic/apic.c        |   2 +-
 arch/x86/kernel/apic/ipi.c         |   2 +-
 arch/x86/kvm/lapic.c               |   6 +-
 arch/x86/kvm/svm/avic.c            | 178 ++++++++++++++++++++++++++---
 arch/x86/kvm/svm/nested.c          |   5 +
 arch/x86/kvm/svm/svm.c             |  75 ++++++++----
 arch/x86/kvm/svm/svm.h             |  25 +++-
 arch/x86/kvm/trace.h               |  18 +++
 arch/x86/kvm/x86.c                 |   8 +-
 14 files changed, 291 insertions(+), 52 deletions(-)

-- 
2.25.1

[PATCH v5 01/17] x86/cpufeatures: Introduce x2AVIC CPUID bit

[Suravee Suthikulpanit]

Introduce a new feature bit for virtualized x2APIC (x2AVIC) in
CPUID_Fn8000000A_EDX [SVM Revision and Feature Identification].

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/include/asm/cpufeatures.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index 1d6826eac3e6..2721bd1e8e1e 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -343,6 +343,7 @@
 #define X86_FEATURE_AVIC		(15*32+13) /* Virtual Interrupt Controller */
 #define X86_FEATURE_V_VMSAVE_VMLOAD	(15*32+15) /* Virtual VMSAVE VMLOAD */
 #define X86_FEATURE_VGIF		(15*32+16) /* Virtual GIF */
+#define X86_FEATURE_X2AVIC		(15*32+18) /* Virtual x2apic */
 #define X86_FEATURE_V_SPEC_CTRL		(15*32+20) /* Virtual SPEC_CTRL */
 #define X86_FEATURE_SVME_ADDR_CHK	(15*32+28) /* "" SVME addr check */
 
-- 
2.25.1

[PATCH v5 02/17] KVM: x86: lapic: Rename [GET/SET]_APIC_DEST_FIELD to [GET/SET]_XAPIC_DEST_FIELD

[Suravee Suthikulpanit]

To signify that the macros only support 8-bit xAPIC destination ID.

Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/hyperv/hv_apic.c      | 2 +-
 arch/x86/include/asm/apicdef.h | 4 ++--
 arch/x86/kernel/apic/apic.c    | 2 +-
 arch/x86/kernel/apic/ipi.c     | 2 +-
 arch/x86/kvm/lapic.c           | 2 +-
 arch/x86/kvm/svm/avic.c        | 4 ++--
 6 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/x86/hyperv/hv_apic.c b/arch/x86/hyperv/hv_apic.c
index db2d92fb44da..fb8b2c088681 100644
--- a/arch/x86/hyperv/hv_apic.c
+++ b/arch/x86/hyperv/hv_apic.c
@@ -46,7 +46,7 @@ static void hv_apic_icr_write(u32 low, u32 id)
 {
 	u64 reg_val;
 
-	reg_val = SET_APIC_DEST_FIELD(id);
+	reg_val = SET_XAPIC_DEST_FIELD(id);
 	reg_val = reg_val << 32;
 	reg_val |= low;
 
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 5716f22f81ac..863c2cad5872 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -89,8 +89,8 @@
 #define		APIC_DM_EXTINT		0x00700
 #define		APIC_VECTOR_MASK	0x000FF
 #define	APIC_ICR2	0x310
-#define		GET_APIC_DEST_FIELD(x)	(((x) >> 24) & 0xFF)
-#define		SET_APIC_DEST_FIELD(x)	((x) << 24)
+#define		GET_XAPIC_DEST_FIELD(x)	(((x) >> 24) & 0xFF)
+#define		SET_XAPIC_DEST_FIELD(x)	((x) << 24)
 #define	APIC_LVTT	0x320
 #define	APIC_LVTTHMR	0x330
 #define	APIC_LVTPC	0x340
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index b70344bf6600..e6b754e43ed7 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -275,7 +275,7 @@ void native_apic_icr_write(u32 low, u32 id)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
+	apic_write(APIC_ICR2, SET_XAPIC_DEST_FIELD(id));
 	apic_write(APIC_ICR, low);
 	local_irq_restore(flags);
 }
diff --git a/arch/x86/kernel/apic/ipi.c b/arch/x86/kernel/apic/ipi.c
index d1fb874fbe64..2a6509e8c840 100644
--- a/arch/x86/kernel/apic/ipi.c
+++ b/arch/x86/kernel/apic/ipi.c
@@ -99,7 +99,7 @@ void native_send_call_func_ipi(const struct cpumask *mask)
 
 static inline int __prepare_ICR2(unsigned int mask)
 {
-	return SET_APIC_DEST_FIELD(mask);
+	return SET_XAPIC_DEST_FIELD(mask);
 }
 
 static inline void __xapic_wait_icr_idle(void)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 137c3a2f5180..8b8c4a905976 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1326,7 +1326,7 @@ void kvm_apic_send_ipi(struct kvm_lapic *apic, u32 icr_low, u32 icr_high)
 	if (apic_x2apic_mode(apic))
 		irq.dest_id = icr_high;
 	else
-		irq.dest_id = GET_APIC_DEST_FIELD(icr_high);
+		irq.dest_id = GET_XAPIC_DEST_FIELD(icr_high);
 
 	trace_kvm_apic_ipi(icr_low, irq.dest_id);
 
diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 54fe03714f8a..a8f514212b87 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -328,7 +328,7 @@ static int avic_kick_target_vcpus_fast(struct kvm *kvm, struct kvm_lapic *source
 	if (apic_x2apic_mode(vcpu->arch.apic))
 		dest = icrh;
 	else
-		dest = GET_APIC_DEST_FIELD(icrh);
+		dest = GET_XAPIC_DEST_FIELD(icrh);
 
 	/*
 	 * Try matching the destination APIC ID with the vCPU.
@@ -364,7 +364,7 @@ static void avic_kick_target_vcpus(struct kvm *kvm, struct kvm_lapic *source,
 	 */
 	kvm_for_each_vcpu(i, vcpu, kvm) {
 		if (kvm_apic_match_dest(vcpu, source, icrl & APIC_SHORT_MASK,
-					GET_APIC_DEST_FIELD(icrh),
+					GET_XAPIC_DEST_FIELD(icrh),
 					icrl & APIC_DEST_MASK)) {
 			vcpu->arch.apic->irr_pending = true;
 			svm_complete_interrupt_delivery(vcpu,
-- 
2.25.1

[PATCH v5 03/17] KVM: SVM: Detect X2APIC virtualization (x2AVIC) support

[Suravee Suthikulpanit]

Add CPUID check for the x2APIC virtualization (x2AVIC) feature.
If available, the SVM driver can support both AVIC and x2AVIC modes
when load the kvm_amd driver with avic=1. The operating mode will be
determined at runtime depending on the guest APIC mode.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/include/asm/svm.h |  3 +++
 arch/x86/kvm/svm/avic.c    | 45 ++++++++++++++++++++++++++++++++++++++
 arch/x86/kvm/svm/svm.c     | 15 ++-----------
 arch/x86/kvm/svm/svm.h     |  9 ++++++++
 4 files changed, 59 insertions(+), 13 deletions(-)

diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
index f70a5108d464..2c2a104b777e 100644
--- a/arch/x86/include/asm/svm.h
+++ b/arch/x86/include/asm/svm.h
@@ -195,6 +195,9 @@ struct __attribute__ ((__packed__)) vmcb_control_area {
 #define AVIC_ENABLE_SHIFT 31
 #define AVIC_ENABLE_MASK (1 << AVIC_ENABLE_SHIFT)
 
+#define X2APIC_MODE_SHIFT 30
+#define X2APIC_MODE_MASK (1 << X2APIC_MODE_SHIFT)
+
 #define LBR_CTL_ENABLE_MASK BIT_ULL(0)
 #define VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK BIT_ULL(1)
 
diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index a8f514212b87..7d4e73e95acd 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -40,6 +40,9 @@
 #define AVIC_GATAG_TO_VMID(x)		((x >> AVIC_VCPU_ID_BITS) & AVIC_VM_ID_MASK)
 #define AVIC_GATAG_TO_VCPUID(x)		(x & AVIC_VCPU_ID_MASK)
 
+static bool force_avic;
+module_param_unsafe(force_avic, bool, 0444);
+
 /* Note:
  * This hash table is used to map VM_ID to a struct kvm_svm,
  * when handling AMD IOMMU GALOG notification to schedule in
@@ -50,6 +53,7 @@ static DEFINE_HASHTABLE(svm_vm_data_hash, SVM_VM_DATA_HASH_BITS);
 static u32 next_vm_id = 0;
 static bool next_vm_id_wrapped = 0;
 static DEFINE_SPINLOCK(svm_vm_data_hash_lock);
+enum avic_modes avic_mode;
 
 /*
  * This is a wrapper of struct amd_iommu_ir_data.
@@ -1077,3 +1081,44 @@ void avic_vcpu_unblocking(struct kvm_vcpu *vcpu)
 
 	avic_vcpu_load(vcpu);
 }
+
+/*
+ * Note:
+ * - The module param avic enable both xAPIC and x2APIC mode.
+ * - Hypervisor can support both xAVIC and x2AVIC in the same guest.
+ * - The mode can be switched at run-time.
+ */
+bool avic_hardware_setup(struct kvm_x86_ops *x86_ops)
+{
+	if (!npt_enabled)
+		return false;
+
+	if (boot_cpu_has(X86_FEATURE_AVIC)) {
+		avic_mode = AVIC_MODE_X1;
+		pr_info("AVIC enabled\n");
+	} else if (force_avic) {
+		/*
+		 * Some older systems does not advertise AVIC support.
+		 * See Revision Guide for specific AMD processor for more detail.
+		 */
+		avic_mode = AVIC_MODE_X1;
+		pr_warn("AVIC is not supported in CPUID but force enabled");
+		pr_warn("Your system might crash and burn");
+	}
+
+	/* AVIC is a prerequisite for x2AVIC. */
+	if (boot_cpu_has(X86_FEATURE_X2AVIC)) {
+		if (avic_mode == AVIC_MODE_X1) {
+			avic_mode = AVIC_MODE_X2;
+			pr_info("x2AVIC enabled\n");
+		} else {
+			pr_warn(FW_BUG "Cannot support x2AVIC due to AVIC is disabled");
+			pr_warn(FW_BUG "Try enable AVIC using force_avic option");
+		}
+	}
+
+	if (avic_mode != AVIC_MODE_NONE)
+		amd_iommu_register_ga_log_notifier(&avic_ga_log_notifier);
+
+	return !!avic_mode;
+}
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index aa7b387e0b7c..196bca5751a1 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -188,9 +188,6 @@ module_param(tsc_scaling, int, 0444);
 static bool avic;
 module_param(avic, bool, 0444);
 
-static bool force_avic;
-module_param_unsafe(force_avic, bool, 0444);
-
 bool __read_mostly dump_invalid_vmcb;
 module_param(dump_invalid_vmcb, bool, 0644);
 
@@ -4913,17 +4910,9 @@ static __init int svm_hardware_setup(void)
 			nrips = false;
 	}
 
-	enable_apicv = avic = avic && npt_enabled && (boot_cpu_has(X86_FEATURE_AVIC) || force_avic);
+	enable_apicv = avic = avic && avic_hardware_setup(&svm_x86_ops);
 
-	if (enable_apicv) {
-		if (!boot_cpu_has(X86_FEATURE_AVIC)) {
-			pr_warn("AVIC is not supported in CPUID but force enabled");
-			pr_warn("Your system might crash and burn");
-		} else
-			pr_info("AVIC enabled\n");
-
-		amd_iommu_register_ga_log_notifier(&avic_ga_log_notifier);
-	} else {
+	if (!enable_apicv) {
 		svm_x86_ops.vcpu_blocking = NULL;
 		svm_x86_ops.vcpu_unblocking = NULL;
 		svm_x86_ops.vcpu_get_apicv_inhibit_reasons = NULL;
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index 32220a1b0ea2..1731c1f3884b 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -36,6 +36,14 @@ extern bool npt_enabled;
 extern int vgif;
 extern bool intercept_smi;
 
+enum avic_modes {
+	AVIC_MODE_NONE = 0,
+	AVIC_MODE_X1,
+	AVIC_MODE_X2,
+};
+
+extern enum avic_modes avic_mode;
+
 /*
  * Clean bits in VMCB.
  * VMCB_ALL_CLEAN_MASK might also need to
@@ -603,6 +611,7 @@ extern struct kvm_x86_nested_ops svm_nested_ops;
 
 /* avic.c */
 
+bool avic_hardware_setup(struct kvm_x86_ops *ops);
 int avic_ga_log_notifier(u32 ga_tag);
 void avic_vm_destroy(struct kvm *kvm);
 int avic_vm_init(struct kvm *kvm);
-- 
2.25.1

[PATCH v5 04/17] KVM: SVM: Update max number of vCPUs supported for x2AVIC mode

[Suravee Suthikulpanit]

xAVIC and x2AVIC modes can support diffferent number of vcpus.
Update existing logics to support each mode accordingly.

Also, modify the maximum physical APIC ID for AVIC to 255 to reflect
the actual value supported by the architecture.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/include/asm/svm.h | 12 +++++++++---
 arch/x86/kvm/svm/avic.c    |  8 +++++---
 2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
index 2c2a104b777e..4c26b0d47d76 100644
--- a/arch/x86/include/asm/svm.h
+++ b/arch/x86/include/asm/svm.h
@@ -258,10 +258,16 @@ enum avic_ipi_failure_cause {
 
 
 /*
- * 0xff is broadcast, so the max index allowed for physical APIC ID
- * table is 0xfe.  APIC IDs above 0xff are reserved.
+ * For AVIC, the max index allowed for physical APIC ID
+ * table is 0xff (255).
  */
-#define AVIC_MAX_PHYSICAL_ID_COUNT	0xff
+#define AVIC_MAX_PHYSICAL_ID		0XFEULL
+
+/*
+ * For x2AVIC, the max index allowed for physical APIC ID
+ * table is 0x1ff (511).
+ */
+#define X2AVIC_MAX_PHYSICAL_ID		0x1FFUL
 
 #define AVIC_HPA_MASK	~((0xFFFULL << 52) | 0xFFF)
 #define VMCB_AVIC_APIC_BAR_MASK		0xFFFFFFFFFF000ULL
diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 7d4e73e95acd..6b89303034e3 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -179,7 +179,7 @@ void avic_init_vmcb(struct vcpu_svm *svm, struct vmcb *vmcb)
 	vmcb->control.avic_backing_page = bpa & AVIC_HPA_MASK;
 	vmcb->control.avic_logical_id = lpa & AVIC_HPA_MASK;
 	vmcb->control.avic_physical_id = ppa & AVIC_HPA_MASK;
-	vmcb->control.avic_physical_id |= AVIC_MAX_PHYSICAL_ID_COUNT;
+	vmcb->control.avic_physical_id |= AVIC_MAX_PHYSICAL_ID;
 	vmcb->control.avic_vapic_bar = APIC_DEFAULT_PHYS_BASE & VMCB_AVIC_APIC_BAR_MASK;
 
 	if (kvm_apicv_activated(svm->vcpu.kvm))
@@ -194,7 +194,8 @@ static u64 *avic_get_physical_id_entry(struct kvm_vcpu *vcpu,
 	u64 *avic_physical_id_table;
 	struct kvm_svm *kvm_svm = to_kvm_svm(vcpu->kvm);
 
-	if (index >= AVIC_MAX_PHYSICAL_ID_COUNT)
+	if ((avic_mode == AVIC_MODE_X1 && index > AVIC_MAX_PHYSICAL_ID) ||
+	    (avic_mode == AVIC_MODE_X2 && index > X2AVIC_MAX_PHYSICAL_ID))
 		return NULL;
 
 	avic_physical_id_table = page_address(kvm_svm->avic_physical_id_table_page);
@@ -241,7 +242,8 @@ static int avic_init_backing_page(struct kvm_vcpu *vcpu)
 	int id = vcpu->vcpu_id;
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	if (id >= AVIC_MAX_PHYSICAL_ID_COUNT)
+	if ((avic_mode == AVIC_MODE_X1 && id > AVIC_MAX_PHYSICAL_ID) ||
+	    (avic_mode == AVIC_MODE_X2 && id > X2AVIC_MAX_PHYSICAL_ID))
 		return -EINVAL;
 
 	if (!vcpu->arch.apic->regs)
-- 
2.25.1

[PATCH v5 05/17] KVM: SVM: Update avic_kick_target_vcpus to support 32-bit APIC ID

[Suravee Suthikulpanit]

In x2APIC mode, ICRH contains 32-bit destination APIC ID.
So, update the avic_kick_target_vcpus() accordingly.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/kvm/svm/avic.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 6b89303034e3..560c8a886199 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -369,9 +369,15 @@ static void avic_kick_target_vcpus(struct kvm *kvm, struct kvm_lapic *source,
 	 * since entered the guest will have processed pending IRQs at VMRUN.
 	 */
 	kvm_for_each_vcpu(i, vcpu, kvm) {
+		u32 dest;
+
+		if (apic_x2apic_mode(vcpu->arch.apic))
+			dest = icrh;
+		else
+			dest = GET_XAPIC_DEST_FIELD(icrh);
+
 		if (kvm_apic_match_dest(vcpu, source, icrl & APIC_SHORT_MASK,
-					GET_XAPIC_DEST_FIELD(icrh),
-					icrl & APIC_DEST_MASK)) {
+					dest, icrl & APIC_DEST_MASK)) {
 			vcpu->arch.apic->irr_pending = true;
 			svm_complete_interrupt_delivery(vcpu,
 							icrl & APIC_MODE_MASK,
-- 
2.25.1

[PATCH v5 06/17] KVM: SVM: Do not support updating APIC ID when in x2APIC mode

[Suravee Suthikulpanit]

In X2APIC mode, the Logical Destination Register is read-only,
which provides a fixed mapping between the logical and physical
APIC IDs. Therefore, there is no Logical APIC ID table in X2AVIC
and the processor uses the X2APIC ID in the backing page to create
a vCPU’s logical ID.

In addition, KVM does not support updating APIC ID in x2APIC mode,
which means AVIC does not need to handle this case.

Therefore, check x2APIC mode when handling physical and logical
APIC ID update, and when invalidating logical APIC ID table.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/kvm/svm/avic.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 560c8a886199..7aa75931bec1 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -493,8 +493,13 @@ static void avic_invalidate_logical_id_entry(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 	bool flat = svm->dfr_reg == APIC_DFR_FLAT;
-	u32 *entry = avic_get_logical_id_entry(vcpu, svm->ldr_reg, flat);
+	u32 *entry;
 
+	/* Note: x2AVIC does not use logical APIC ID table */
+	if (apic_x2apic_mode(vcpu->arch.apic))
+		return;
+
+	entry = avic_get_logical_id_entry(vcpu, svm->ldr_reg, flat);
 	if (entry)
 		clear_bit(AVIC_LOGICAL_ID_ENTRY_VALID_BIT, (unsigned long *)entry);
 }
@@ -506,6 +511,10 @@ static int avic_handle_ldr_update(struct kvm_vcpu *vcpu)
 	u32 ldr = kvm_lapic_get_reg(vcpu->arch.apic, APIC_LDR);
 	u32 id = kvm_xapic_id(vcpu->arch.apic);
 
+	/* AVIC does not support LDR update for x2APIC */
+	if (apic_x2apic_mode(vcpu->arch.apic))
+		return 0;
+
 	if (ldr == svm->ldr_reg)
 		return 0;
 
@@ -526,6 +535,14 @@ static int avic_handle_apic_id_update(struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 	u32 id = kvm_xapic_id(vcpu->arch.apic);
 
+	/*
+	 * KVM does not support apic ID update for x2APIC.
+	 * Also, need to check if the APIC ID exceed 254.
+	 */
+	if (apic_x2apic_mode(vcpu->arch.apic) ||
+	    (vcpu->vcpu_id >= APIC_BROADCAST))
+		return 0;
+
 	if (vcpu->vcpu_id == id)
 		return 0;
 
-- 
2.25.1

[PATCH v5 07/17] KVM: SVM: Adding support for configuring x2APIC MSRs interception

[Suravee Suthikulpanit]

When enabling x2APIC virtualization (x2AVIC), the interception of
x2APIC MSRs must be disabled to let the hardware virtualize guest
MSR accesses.

Current implementation keeps track of list of MSR interception state
in the svm_direct_access_msrs array. Therefore, extends the array to
include x2APIC MSRs.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/kvm/svm/svm.c | 25 +++++++++++++++++++++++++
 arch/x86/kvm/svm/svm.h |  4 ++--
 2 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 196bca5751a1..2cf6710333f8 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -100,6 +100,31 @@ static const struct svm_direct_access_msrs {
 	{ .index = MSR_IA32_CR_PAT,			.always = false },
 	{ .index = MSR_AMD64_SEV_ES_GHCB,		.always = true  },
 	{ .index = MSR_TSC_AUX,				.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_ID),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_LVR),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_TASKPRI),	.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_ARBPRI),	.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_PROCPRI),	.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_EOI),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_RRR),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_LDR),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_DFR),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_SPIV),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_ISR),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_TMR),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_IRR),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_ESR),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_ICR),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_ICR2),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_LVTT),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_LVTTHMR),	.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_LVTPC),	.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_LVT0),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_LVT1),		.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_LVTERR),	.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_TMICT),	.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_TMCCT),	.always = false },
+	{ .index = (APIC_BASE_MSR + APIC_TDCR),		.always = false },
 	{ .index = MSR_INVALID,				.always = false },
 };
 
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index 1731c1f3884b..16f1d117c98b 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -29,8 +29,8 @@
 #define	IOPM_SIZE PAGE_SIZE * 3
 #define	MSRPM_SIZE PAGE_SIZE * 2
 
-#define MAX_DIRECT_ACCESS_MSRS	21
-#define MSRPM_OFFSETS	16
+#define MAX_DIRECT_ACCESS_MSRS	46
+#define MSRPM_OFFSETS	32
 extern u32 msrpm_offsets[MSRPM_OFFSETS] __read_mostly;
 extern bool npt_enabled;
 extern int vgif;
-- 
2.25.1

[PATCH v5 08/17] KVM: x86: Deactivate APICv on vCPU with APIC disabled

[Suravee Suthikulpanit]

APICv should be deactivated on vCPU that has APIC disabled.
Therefore, call kvm_vcpu_update_apicv() when changing
APIC mode, and add additional check for APIC disable mode
when determine APICV activation,

Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/kvm/lapic.c | 4 +++-
 arch/x86/kvm/x86.c   | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 8b8c4a905976..680824d7aa0d 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2346,8 +2346,10 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 	if (((old_value ^ value) & X2APIC_ENABLE) && (value & X2APIC_ENABLE))
 		kvm_apic_set_x2apic_id(apic, vcpu->vcpu_id);
 
-	if ((old_value ^ value) & (MSR_IA32_APICBASE_ENABLE | X2APIC_ENABLE))
+	if ((old_value ^ value) & (MSR_IA32_APICBASE_ENABLE | X2APIC_ENABLE)) {
+		kvm_vcpu_update_apicv(vcpu);
 		static_call_cond(kvm_x86_set_virtual_apic_mode)(vcpu);
+	}
 
 	apic->base_address = apic->vcpu->arch.apic_base &
 			     MSR_IA32_APICBASE_BASE;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 8ee8c91fa762..77e49892dea1 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -9836,7 +9836,9 @@ void kvm_vcpu_update_apicv(struct kvm_vcpu *vcpu)
 
 	down_read(&vcpu->kvm->arch.apicv_update_lock);
 
-	activate = kvm_vcpu_apicv_activated(vcpu);
+	/* Do not activate APICV when APIC is disabled */
+	activate = kvm_vcpu_apicv_activated(vcpu) &&
+		   (kvm_get_apic_mode(vcpu) != LAPIC_MODE_DISABLED);
 
 	if (vcpu->arch.apicv_active == activate)
 		goto out;
-- 
2.25.1

[PATCH v5 09/17] KVM: SVM: Refresh AVIC configuration when changing APIC mode

[Suravee Suthikulpanit]

AMD AVIC can support xAPIC and x2APIC virtualization,
which requires changing x2APIC bit VMCB and MSR intercepton
for x2APIC MSRs. Therefore, call avic_refresh_apicv_exec_ctrl()
to refresh configuration accordingly.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/kvm/svm/avic.c | 12 ++++++++++++
 arch/x86/kvm/svm/svm.c  |  1 +
 2 files changed, 13 insertions(+)

diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 7aa75931bec1..aa88cef3d41f 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -685,6 +685,18 @@ void avic_apicv_post_state_restore(struct kvm_vcpu *vcpu)
 	avic_handle_ldr_update(vcpu);
 }
 
+void avic_set_virtual_apic_mode(struct kvm_vcpu *vcpu)
+{
+	if (!lapic_in_kernel(vcpu) || (avic_mode == AVIC_MODE_NONE))
+		return;
+
+	if (kvm_get_apic_mode(vcpu) == LAPIC_MODE_INVALID) {
+		WARN_ONCE(true, "Invalid local APIC state (vcpu_id=%d)", vcpu->vcpu_id);
+		return;
+	}
+	avic_refresh_apicv_exec_ctrl(vcpu);
+}
+
 static int avic_set_pi_irte_mode(struct kvm_vcpu *vcpu, bool activate)
 {
 	int ret = 0;
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 2cf6710333f8..31b669f3f3de 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -4692,6 +4692,7 @@ static struct kvm_x86_ops svm_x86_ops __initdata = {
 	.enable_nmi_window = svm_enable_nmi_window,
 	.enable_irq_window = svm_enable_irq_window,
 	.update_cr8_intercept = svm_update_cr8_intercept,
+	.set_virtual_apic_mode = avic_set_virtual_apic_mode,
 	.refresh_apicv_exec_ctrl = avic_refresh_apicv_exec_ctrl,
 	.check_apicv_inhibit_reasons = avic_check_apicv_inhibit_reasons,
 	.apicv_post_state_restore = avic_apicv_post_state_restore,
-- 
2.25.1

[PATCH v5 10/17] KVM: SVM: Introduce helper functions to (de)activate AVIC and x2AVIC

[Suravee Suthikulpanit]

Refactor the current logic for (de)activate AVIC into helper functions,
and also add logic for (de)activate x2AVIC. The helper function are used
when initializing AVIC and switching from AVIC to x2AVIC mode
(handled by svm_refresh_spicv_exec_ctrl()).

When an AVIC-enabled guest switches from APIC to x2APIC mode during
runtime, the SVM driver needs to perform the following steps:

1. Set the x2APIC mode bit for AVIC in VMCB along with the maximum
APIC ID support for each mode accodingly.

2. Disable x2APIC MSRs interception in order to allow the hardware
to virtualize x2APIC MSRs accesses.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/include/asm/svm.h |  1 +
 arch/x86/kvm/svm/avic.c    | 39 +++++++++++++++++++++++++++++++++-----
 arch/x86/kvm/svm/svm.c     | 18 ++++++++++++++++++
 arch/x86/kvm/svm/svm.h     |  1 +
 4 files changed, 54 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
index 4c26b0d47d76..13d315b4eaba 100644
--- a/arch/x86/include/asm/svm.h
+++ b/arch/x86/include/asm/svm.h
@@ -256,6 +256,7 @@ enum avic_ipi_failure_cause {
 	AVIC_IPI_FAILURE_INVALID_BACKING_PAGE,
 };
 
+#define AVIC_PHYSICAL_MAX_INDEX_MASK	GENMASK_ULL(9, 0)
 
 /*
  * For AVIC, the max index allowed for physical APIC ID
diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index aa88cef3d41f..d40170082716 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -63,6 +63,36 @@ struct amd_svm_iommu_ir {
 	void *data;		/* Storing pointer to struct amd_ir_data */
 };
 
+static void avic_activate_vmcb(struct vcpu_svm *svm)
+{
+	struct vmcb *vmcb = svm->vmcb01.ptr;
+
+	vmcb->control.int_ctl &= ~(AVIC_ENABLE_MASK | X2APIC_MODE_MASK);
+	vmcb->control.avic_physical_id &= ~AVIC_PHYSICAL_MAX_INDEX_MASK;
+
+	vmcb->control.int_ctl |= AVIC_ENABLE_MASK;
+	if (apic_x2apic_mode(svm->vcpu.arch.apic)) {
+		vmcb->control.int_ctl |= X2APIC_MODE_MASK;
+		vmcb->control.avic_physical_id |= X2AVIC_MAX_PHYSICAL_ID;
+		/* Disabling MSR intercept for x2APIC registers */
+		svm_set_x2apic_msr_interception(svm, false);
+	} else {
+		vmcb->control.avic_physical_id |= AVIC_MAX_PHYSICAL_ID;
+		/* Enabling MSR intercept for x2APIC registers */
+		svm_set_x2apic_msr_interception(svm, true);
+	}
+}
+
+static void avic_deactivate_vmcb(struct vcpu_svm *svm)
+{
+	struct vmcb *vmcb = svm->vmcb01.ptr;
+
+	vmcb->control.int_ctl &= ~(AVIC_ENABLE_MASK | X2APIC_MODE_MASK);
+	vmcb->control.avic_physical_id &= ~AVIC_PHYSICAL_MAX_INDEX_MASK;
+
+	/* Enabling MSR intercept for x2APIC registers */
+	svm_set_x2apic_msr_interception(svm, true);
+}
 
 /* Note:
  * This function is called from IOMMU driver to notify
@@ -179,13 +209,12 @@ void avic_init_vmcb(struct vcpu_svm *svm, struct vmcb *vmcb)
 	vmcb->control.avic_backing_page = bpa & AVIC_HPA_MASK;
 	vmcb->control.avic_logical_id = lpa & AVIC_HPA_MASK;
 	vmcb->control.avic_physical_id = ppa & AVIC_HPA_MASK;
-	vmcb->control.avic_physical_id |= AVIC_MAX_PHYSICAL_ID;
 	vmcb->control.avic_vapic_bar = APIC_DEFAULT_PHYS_BASE & VMCB_AVIC_APIC_BAR_MASK;
 
 	if (kvm_apicv_activated(svm->vcpu.kvm))
-		vmcb->control.int_ctl |= AVIC_ENABLE_MASK;
+		avic_activate_vmcb(svm);
 	else
-		vmcb->control.int_ctl &= ~AVIC_ENABLE_MASK;
+		avic_deactivate_vmcb(svm);
 }
 
 static u64 *avic_get_physical_id_entry(struct kvm_vcpu *vcpu,
@@ -1076,9 +1105,9 @@ void avic_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
 		 * accordingly before re-activating.
 		 */
 		avic_apicv_post_state_restore(vcpu);
-		vmcb->control.int_ctl |= AVIC_ENABLE_MASK;
+		avic_activate_vmcb(svm);
 	} else {
-		vmcb->control.int_ctl &= ~AVIC_ENABLE_MASK;
+		avic_deactivate_vmcb(svm);
 	}
 	vmcb_mark_dirty(vmcb, VMCB_AVIC);
 
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 31b669f3f3de..0ec2444c342d 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -746,6 +746,24 @@ void svm_vcpu_init_msrpm(struct kvm_vcpu *vcpu, u32 *msrpm)
 	}
 }
 
+void svm_set_x2apic_msr_interception(struct vcpu_svm *svm, bool intercept)
+{
+	int i;
+
+	if (avic_mode != AVIC_MODE_X2 ||
+	    !apic_x2apic_mode(svm->vcpu.arch.apic))
+		return;
+
+	for (i = 0; i < MAX_DIRECT_ACCESS_MSRS; i++) {
+		int index = direct_access_msrs[i].index;
+
+		if ((index < APIC_BASE_MSR) ||
+		    (index > APIC_BASE_MSR + 0xff))
+			continue;
+		set_msr_interception(&svm->vcpu, svm->msrpm, index,
+				     !intercept, !intercept);
+	}
+}
 
 void svm_vcpu_free_msrpm(u32 *msrpm)
 {
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index 16f1d117c98b..818817b11f53 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -542,6 +542,7 @@ void svm_set_gif(struct vcpu_svm *svm, bool value);
 int svm_invoke_exit_handler(struct kvm_vcpu *vcpu, u64 exit_code);
 void set_msr_interception(struct kvm_vcpu *vcpu, u32 *msrpm, u32 msr,
 			  int read, int write);
+void svm_set_x2apic_msr_interception(struct vcpu_svm *svm, bool disable);
 void svm_complete_interrupt_delivery(struct kvm_vcpu *vcpu, int delivery_mode,
 				     int trig_mode, int vec);
 
-- 
2.25.1

[PATCH v5 11/17] KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu

[Suravee Suthikulpanit]

Originalliy, this WARN_ON is designed to detect when calling
avic_vcpu_load() on an already running vcpu in AVIC mode (i.e. the AVIC
is_running bit is set).

However, for x2AVIC, the vCPU can switch from xAPIC to x2APIC mode while in
running state, in which the avic_vcpu_load() will be called from
svm_refresh_apicv_exec_ctrl().

Therefore, remove this warning since it is no longer appropriate.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/kvm/svm/avic.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index d40170082716..2d9455338b1f 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -1038,7 +1038,6 @@ void __avic_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		return;
 
 	entry = READ_ONCE(*(svm->avic_physical_id_cache));
-	WARN_ON(entry & AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK);
 
 	entry &= ~AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK;
 	entry |= (h_physical_id & AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK);
-- 
2.25.1

[PATCH v5 12/17] KVM: SVM: Introduce hybrid-AVIC mode

[Suravee Suthikulpanit]

Currently, AVIC is inhibited when booting a VM w/ x2APIC support.
because AVIC cannot virtualize x2APIC MSR register accesses.
However, the AVIC doorbell can be used to accelerate interrupt
injection into a running vCPU, while all guest accesses to x2APIC MSRs
will be intercepted and emulated by KVM.

With hybrid-AVIC support, the APICV_INHIBIT_REASON_X2APIC is
no longer enforced.

Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/include/asm/kvm_host.h |  1 -
 arch/x86/kvm/svm/avic.c         | 13 +++++++++++--
 arch/x86/kvm/svm/svm.c          |  9 ---------
 3 files changed, 11 insertions(+), 12 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index c59fea4bdb6e..da03111b05f6 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1051,7 +1051,6 @@ enum kvm_apicv_inhibit {
 	APICV_INHIBIT_REASON_NESTED,
 	APICV_INHIBIT_REASON_IRQWIN,
 	APICV_INHIBIT_REASON_PIT_REINJ,
-	APICV_INHIBIT_REASON_X2APIC,
 	APICV_INHIBIT_REASON_BLOCKIRQ,
 	APICV_INHIBIT_REASON_ABSENT,
 	APICV_INHIBIT_REASON_SEV,
diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 2d9455338b1f..bac876bb1cf1 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -71,12 +71,22 @@ static void avic_activate_vmcb(struct vcpu_svm *svm)
 	vmcb->control.avic_physical_id &= ~AVIC_PHYSICAL_MAX_INDEX_MASK;
 
 	vmcb->control.int_ctl |= AVIC_ENABLE_MASK;
-	if (apic_x2apic_mode(svm->vcpu.arch.apic)) {
+
+	/* Note:
+	 * KVM can support hybrid-AVIC mode, where KVM emulates x2APIC
+	 * MSR accesses, while interrupt injection to a running vCPU
+	 * can be achieved using AVIC doorbell. The AVIC hardware still
+	 * accelerate MMIO accesses, but this does not cause any harm
+	 * as the guest is not supposed to access xAPIC mmio when uses x2APIC.
+	 */
+	if (apic_x2apic_mode(svm->vcpu.arch.apic) &&
+	    (avic_mode == AVIC_MODE_X2)) {
 		vmcb->control.int_ctl |= X2APIC_MODE_MASK;
 		vmcb->control.avic_physical_id |= X2AVIC_MAX_PHYSICAL_ID;
 		/* Disabling MSR intercept for x2APIC registers */
 		svm_set_x2apic_msr_interception(svm, false);
 	} else {
+		/* For xAVIC and hybrid-xAVIC modes */
 		vmcb->control.avic_physical_id |= AVIC_MAX_PHYSICAL_ID;
 		/* Enabling MSR intercept for x2APIC registers */
 		svm_set_x2apic_msr_interception(svm, true);
@@ -978,7 +988,6 @@ bool avic_check_apicv_inhibit_reasons(enum kvm_apicv_inhibit reason)
 			  BIT(APICV_INHIBIT_REASON_NESTED) |
 			  BIT(APICV_INHIBIT_REASON_IRQWIN) |
 			  BIT(APICV_INHIBIT_REASON_PIT_REINJ) |
-			  BIT(APICV_INHIBIT_REASON_X2APIC) |
 			  BIT(APICV_INHIBIT_REASON_BLOCKIRQ) |
 			  BIT(APICV_INHIBIT_REASON_SEV);
 
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 0ec2444c342d..e04a133b98d0 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -4061,7 +4061,6 @@ static void svm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 	struct kvm_cpuid_entry2 *best;
-	struct kvm *kvm = vcpu->kvm;
 
 	vcpu->arch.xsaves_enabled = guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) &&
 				    boot_cpu_has(X86_FEATURE_XSAVE) &&
@@ -4093,14 +4092,6 @@ static void svm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu)
 			vcpu->arch.reserved_gpa_bits &= ~(1UL << (best->ebx & 0x3f));
 	}
 
-	if (kvm_vcpu_apicv_active(vcpu)) {
-		/*
-		 * AVIC does not work with an x2APIC mode guest. If the X2APIC feature
-		 * is exposed to the guest, disable AVIC.
-		 */
-		if (guest_cpuid_has(vcpu, X86_FEATURE_X2APIC))
-			kvm_set_apicv_inhibit(kvm, APICV_INHIBIT_REASON_X2APIC);
-	}
 	init_vmcb_after_set_cpuid(vcpu);
 }
 
-- 
2.25.1

[PATCH v5 13/17] KVM: x86: Warning APICv inconsistency only when vcpu APIC mode is valid

[Suravee Suthikulpanit]

When launching a VM with x2APIC and specify more than 255 vCPUs,
the guest kernel can disable x2APIC (e.g. specify nox2apic kernel option).
The VM fallbacks to xAPIC mode, and disable the vCPU ID 255 and greater.

In this case, APICV is deactivated for the disabled vCPUs.
However, the current APICv consistency warning does not account for
this case, which results in a warning.

Therefore, modify warning logic to report only when vCPU APIC mode
is valid.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/kvm/x86.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 77e49892dea1..0febaca80feb 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -10242,7 +10242,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		 * per-VM state, and responsing vCPUs must wait for the update
 		 * to complete before servicing KVM_REQ_APICV_UPDATE.
 		 */
-		WARN_ON_ONCE(kvm_vcpu_apicv_activated(vcpu) != kvm_vcpu_apicv_active(vcpu));
+		WARN_ON_ONCE((kvm_vcpu_apicv_activated(vcpu) != kvm_vcpu_apicv_active(vcpu)) &&
+			     (kvm_get_apic_mode(vcpu) != LAPIC_MODE_DISABLED));
 
 		exit_fastpath = static_call(kvm_x86_vcpu_run)(vcpu);
 		if (likely(exit_fastpath != EXIT_FASTPATH_REENTER_GUEST))
-- 
2.25.1

[PATCH v5 14/17] KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible

[Suravee Suthikulpanit]

For x2AVIC, the index from incomplete IPI #vmexit info is invalid
for logical cluster mode. Only ICRH/ICRL values can be used
to determine the IPI destination APIC ID.

Since QEMU defines guest physical APIC ID to be the same as
vCPU ID, it can be used to quickly identify the target vCPU to deliver IPI,
and avoid the overhead from searching through all vCPUs to match the target
vCPU.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/kvm/svm/avic.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index bac876bb1cf1..9c439a32c343 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -358,7 +358,26 @@ static int avic_kick_target_vcpus_fast(struct kvm *kvm, struct kvm_lapic *source
 			/* For xAPIC logical mode, the index is for logical APIC table. */
 			apic_id = avic_logical_id_table[index] & 0x1ff;
 		} else {
-			return -EINVAL;
+			/* For x2APIC logical mode, cannot leverage the index.
+			 * Instead, calculate physical ID from logical ID in ICRH.
+			 */
+			int apic;
+			int first = ffs(icrh & 0xffff);
+			int last = fls(icrh & 0xffff);
+			int cluster = (icrh & 0xffff0000) >> 16;
+
+			/*
+			 * If the x2APIC logical ID sub-field (i.e. icrh[15:0]) contains zero
+			 * or more than 1 bits, we cannot match just one vcpu to kick for
+			 * fast path.
+			 */
+			if (!first || (first != last))
+				return -EINVAL;
+
+			apic = first - 1;
+			if ((apic < 0) || (apic > 15) || (cluster >= 0xfffff))
+				return -EINVAL;
+			apic_id = (cluster << 4) + apic;
 		}
 	}
 
-- 
2.25.1

[PATCH v5 15/17] KVM: SVM: Add AVIC doorbell tracepoint

[Suravee Suthikulpanit]

Add a tracepoint to track number of doorbells being sent
to signal a running vCPU to process IRQ after being injected.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
 arch/x86/kvm/svm/avic.c |  4 +++-
 arch/x86/kvm/trace.h    | 18 ++++++++++++++++++
 arch/x86/kvm/x86.c      |  1 +
 3 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 9c439a32c343..2a9eb419bdb9 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -324,8 +324,10 @@ void avic_ring_doorbell(struct kvm_vcpu *vcpu)
 	 */
 	int cpu = READ_ONCE(vcpu->cpu);
 
-	if (cpu != get_cpu())
+	if (cpu != get_cpu()) {
 		wrmsrl(MSR_AMD64_SVM_AVIC_DOORBELL, kvm_cpu_get_apicid(cpu));
+		trace_kvm_avic_doorbell(vcpu->vcpu_id, kvm_cpu_get_apicid(cpu));
+	}
 	put_cpu();
 }
 
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index de4762517569..a47bb0fdea70 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -1479,6 +1479,24 @@ TRACE_EVENT(kvm_avic_kick_vcpu_slowpath,
 		  __entry->icrh, __entry->icrl, __entry->index)
 );
 
+TRACE_EVENT(kvm_avic_doorbell,
+	    TP_PROTO(u32 vcpuid, u32 apicid),
+	    TP_ARGS(vcpuid, apicid),
+
+	TP_STRUCT__entry(
+		__field(u32, vcpuid)
+		__field(u32, apicid)
+	),
+
+	TP_fast_assign(
+		__entry->vcpuid = vcpuid;
+		__entry->apicid = apicid;
+	),
+
+	TP_printk("vcpuid=%u, apicid=%u",
+		  __entry->vcpuid, __entry->apicid)
+);
+
 TRACE_EVENT(kvm_hv_timer_state,
 		TP_PROTO(unsigned int vcpu_id, unsigned int hv_timer_in_use),
 		TP_ARGS(vcpu_id, hv_timer_in_use),
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0febaca80feb..d013f6fc2e33 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -13095,6 +13095,7 @@ EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_avic_unaccelerated_access);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_avic_incomplete_ipi);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_avic_ga_log);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_avic_kick_vcpu_slowpath);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_avic_doorbell);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_apicv_accept_irq);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_vmgexit_enter);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_vmgexit_exit);
-- 
2.25.1

[PATCH v5 16/17] KVM: x86: nSVM: always intercept x2apic msrs

[Suravee Suthikulpanit]

From: Maxim Levitsky <mlevitsk@redhat.com>

As a preparation for x2avic, this patch ensures that x2apic msrs
are always intercepted for the nested guest.

Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
---
 arch/x86/kvm/svm/nested.c | 5 +++++
 arch/x86/kvm/svm/svm.h    | 9 +++++++++
 2 files changed, 14 insertions(+)

diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index f209c1ca540c..b61f8939c210 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -230,6 +230,11 @@ static bool nested_svm_vmrun_msrpm(struct vcpu_svm *svm)
 			break;
 
 		p      = msrpm_offsets[i];
+
+		/* x2apic msrs are intercepted always for the nested guest */
+		if (is_x2apic_msrpm_offset(p))
+			continue;
+
 		offset = svm->nested.ctl.msrpm_base_pa + (p * 4);
 
 		if (kvm_vcpu_read_guest(&svm->vcpu, offset, &value, 4))
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index 818817b11f53..309445619756 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -517,6 +517,15 @@ static inline bool nested_npt_enabled(struct vcpu_svm *svm)
 	return svm->nested.ctl.nested_ctl & SVM_NESTED_CTL_NP_ENABLE;
 }
 
+static inline bool is_x2apic_msrpm_offset(u32 offset)
+{
+	/* 4 msrs per u8, and 4 u8 in u32 */
+	u32 msr = offset * 16;
+
+	return (msr >= APIC_BASE_MSR) &&
+	       (msr < (APIC_BASE_MSR + 0x100));
+}
+
 /* svm.c */
 #define MSR_INVALID				0xffffffffU
 
-- 
2.25.1

Re: [PATCH v5 16/17] KVM: x86: nSVM: always intercept x2apic msrs

[Maxim Levitsky]

On Wed, 2022-05-18 at 11:26 -0500, Suravee Suthikulpanit wrote:
> From: Maxim Levitsky <mlevitsk@redhat.com>
> 
> As a preparation for x2avic, this patch ensures that x2apic msrs
> are always intercepted for the nested guest.
> 
> Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
> ---
>  arch/x86/kvm/svm/nested.c | 5 +++++
>  arch/x86/kvm/svm/svm.h    | 9 +++++++++
>  2 files changed, 14 insertions(+)
> 
> diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
> index f209c1ca540c..b61f8939c210 100644
> --- a/arch/x86/kvm/svm/nested.c
> +++ b/arch/x86/kvm/svm/nested.c
> @@ -230,6 +230,11 @@ static bool nested_svm_vmrun_msrpm(struct vcpu_svm *svm)
>  			break;
>  
>  		p      = msrpm_offsets[i];
> +
> +		/* x2apic msrs are intercepted always for the nested guest */
> +		if (is_x2apic_msrpm_offset(p))
> +			continue;
> +
>  		offset = svm->nested.ctl.msrpm_base_pa + (p * 4);
>  
>  		if (kvm_vcpu_read_guest(&svm->vcpu, offset, &value, 4))
> diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
> index 818817b11f53..309445619756 100644
> --- a/arch/x86/kvm/svm/svm.h
> +++ b/arch/x86/kvm/svm/svm.h
> @@ -517,6 +517,15 @@ static inline bool nested_npt_enabled(struct vcpu_svm *svm)
>  	return svm->nested.ctl.nested_ctl & SVM_NESTED_CTL_NP_ENABLE;
>  }
>  
> +static inline bool is_x2apic_msrpm_offset(u32 offset)
> +{
> +	/* 4 msrs per u8, and 4 u8 in u32 */
> +	u32 msr = offset * 16;
> +
> +	return (msr >= APIC_BASE_MSR) &&
> +	       (msr < (APIC_BASE_MSR + 0x100));
> +}
> +
>  /* svm.c */
>  #define MSR_INVALID				0xffffffffU
>  

Just one thing, this patch should be earlier in the series (or even first one),
to avoid having a commit window where the problem exists, where malicious
L1 can get access to L0's apic msrs this way.

Best regards,
	Maxim Levitsky

Re: [PATCH v5 16/17] KVM: x86: nSVM: always intercept x2apic msrs

[Maxim Levitsky]

On Wed, 2022-05-18 at 20:18 +0300, Maxim Levitsky wrote:
> On Wed, 2022-05-18 at 11:26 -0500, Suravee Suthikulpanit wrote:
> > From: Maxim Levitsky <mlevitsk@redhat.com>
> > 
> > As a preparation for x2avic, this patch ensures that x2apic msrs
> > are always intercepted for the nested guest.
> > 
> > Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> > Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> > Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
> > ---
> >  arch/x86/kvm/svm/nested.c | 5 +++++
> >  arch/x86/kvm/svm/svm.h    | 9 +++++++++
> >  2 files changed, 14 insertions(+)
> > 
> > diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
> > index f209c1ca540c..b61f8939c210 100644
> > --- a/arch/x86/kvm/svm/nested.c
> > +++ b/arch/x86/kvm/svm/nested.c
> > @@ -230,6 +230,11 @@ static bool nested_svm_vmrun_msrpm(struct vcpu_svm *svm)
> >  			break;
> >  
> >  		p      = msrpm_offsets[i];
> > +
> > +		/* x2apic msrs are intercepted always for the nested guest */
> > +		if (is_x2apic_msrpm_offset(p))
> > +			continue;
> > +
> >  		offset = svm->nested.ctl.msrpm_base_pa + (p * 4);
> >  
> >  		if (kvm_vcpu_read_guest(&svm->vcpu, offset, &value, 4))
> > diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
> > index 818817b11f53..309445619756 100644
> > --- a/arch/x86/kvm/svm/svm.h
> > +++ b/arch/x86/kvm/svm/svm.h
> > @@ -517,6 +517,15 @@ static inline bool nested_npt_enabled(struct vcpu_svm *svm)
> >  	return svm->nested.ctl.nested_ctl & SVM_NESTED_CTL_NP_ENABLE;
> >  }
> >  
> > +static inline bool is_x2apic_msrpm_offset(u32 offset)
> > +{
> > +	/* 4 msrs per u8, and 4 u8 in u32 */
> > +	u32 msr = offset * 16;
> > +
> > +	return (msr >= APIC_BASE_MSR) &&
> > +	       (msr < (APIC_BASE_MSR + 0x100));
> > +}
> > +
> >  /* svm.c */
> >  #define MSR_INVALID				0xffffffffU
> >  
> 
> Just one thing, this patch should be earlier in the series (or even first one),
> to avoid having a commit window where the problem exists, where malicious
> L1 can get access to L0's apic msrs this way.
> 
> Best regards,
> 	Maxim Levitsky

Besides this, I guess I currently don't see anything else seriously wrong with this patch
series.

Hopefully I didn't miss anything serious.

Best regards,
	Maxim Levitsky

Re: [PATCH v5 16/17] KVM: x86: nSVM: always intercept x2apic msrs

[Suravee Suthikulpanit]

On 5/19/22 12:18 AM, Maxim Levitsky wrote:
> On Wed, 2022-05-18 at 11:26 -0500, Suravee Suthikulpanit wrote:
>> From: Maxim Levitsky <mlevitsk@redhat.com>
> ...
> > Just one thing, this patch should be earlier in the series (or even first one),
> to avoid having a commit window where the problem exists, where malicious
> L1 can get access to L0's apic msrs this way.
> 

I have sent out v6, which re-order the patch 16 to be before patch 10 per your suggestion.

Thanks,
Suravee

[PATCH v5 17/17] KVM: x86: nSVM: optimize svm_set_x2apic_msr_interception

[Suravee Suthikulpanit]

From: Maxim Levitsky <mlevitsk@redhat.com>

- Avoid toggling the x2apic msr interception if it is already up to date.

- Avoid touching L0 msr bitmap when AVIC is inhibited on entry to
  the guest mode, because in this case the guest usually uses its
  own msr bitmap.

  Later on VM exit, the 1st optimization will allow KVM to skip
  touching the L0 msr bitmap as well.

Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
---
 arch/x86/kvm/svm/avic.c | 8 ++++++++
 arch/x86/kvm/svm/svm.c  | 7 +++++++
 arch/x86/kvm/svm/svm.h  | 2 ++
 3 files changed, 17 insertions(+)

diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 2a9eb419bdb9..0d7499678cb9 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -100,6 +100,14 @@ static void avic_deactivate_vmcb(struct vcpu_svm *svm)
 	vmcb->control.int_ctl &= ~(AVIC_ENABLE_MASK | X2APIC_MODE_MASK);
 	vmcb->control.avic_physical_id &= ~AVIC_PHYSICAL_MAX_INDEX_MASK;
 
+	/*
+	 * If running nested and the guest uses its own MSR bitmap, there
+	 * is no need to update L0's msr bitmap
+	 */
+	if (is_guest_mode(&svm->vcpu) &&
+	    vmcb12_is_intercept(&svm->nested.ctl, INTERCEPT_MSR_PROT))
+		return;
+
 	/* Enabling MSR intercept for x2APIC registers */
 	svm_set_x2apic_msr_interception(svm, true);
 }
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index e04a133b98d0..4165317c0b00 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -750,6 +750,9 @@ void svm_set_x2apic_msr_interception(struct vcpu_svm *svm, bool intercept)
 {
 	int i;
 
+	if (intercept == svm->x2avic_msrs_intercepted)
+		return;
+
 	if (avic_mode != AVIC_MODE_X2 ||
 	    !apic_x2apic_mode(svm->vcpu.arch.apic))
 		return;
@@ -763,6 +766,8 @@ void svm_set_x2apic_msr_interception(struct vcpu_svm *svm, bool intercept)
 		set_msr_interception(&svm->vcpu, svm->msrpm, index,
 				     !intercept, !intercept);
 	}
+
+	svm->x2avic_msrs_intercepted = intercept;
 }
 
 void svm_vcpu_free_msrpm(u32 *msrpm)
@@ -1333,6 +1338,8 @@ static int svm_vcpu_create(struct kvm_vcpu *vcpu)
 		goto error_free_vmsa_page;
 	}
 
+	svm->x2avic_msrs_intercepted = true;
+
 	svm->vmcb01.ptr = page_address(vmcb01_page);
 	svm->vmcb01.pa = __sme_set(page_to_pfn(vmcb01_page) << PAGE_SHIFT);
 	svm_switch_vmcb(svm, &svm->vmcb01);
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index 309445619756..6395b7791f26 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -272,6 +272,8 @@ struct vcpu_svm {
 	struct vcpu_sev_es_state sev_es;
 
 	bool guest_state_loaded;
+
+	bool x2avic_msrs_intercepted;
 };
 
 struct svm_cpu_data {
-- 
2.25.1