From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758777AbZBSPyf (ORCPT ); Thu, 19 Feb 2009 10:54:35 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753152AbZBSPyZ (ORCPT ); Thu, 19 Feb 2009 10:54:25 -0500 Received: from cdptpa-omtalb.mail.rr.com ([75.180.132.122]:48101 "EHLO cdptpa-omtalb.mail.rr.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752997AbZBSPyX (ORCPT ); Thu, 19 Feb 2009 10:54:23 -0500 Message-ID: <499D80AB.3090408@cfl.rr.com> Date: Thu, 19 Feb 2009 10:54:19 -0500 From: Mark Hounschell User-Agent: Thunderbird 2.0.0.19 (X11/20081227) MIME-Version: 1.0 To: Borislav Petkov CC: Andreas Herrmann , Mark Hounschell , john stultz , linux-kernel , Thomas Gleixner Subject: Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor References: <20090209141841.GA31643@aftab> <49904BED.7090208@cfl.rr.com> <499C0913.9050905@compro.net> <20090218141843.GB13304@aftab> <499C3DED.1090807@cfl.rr.com> <20090218174243.GD13304@aftab> <499C7AC8.4080609@cfl.rr.com> <499D364C.3010704@cfl.rr.com> <20090219141131.GM4301@alberich.amd.com> <499D77D8.509@cfl.rr.com> <20090219151930.GB7613@aftab> In-Reply-To: <20090219151930.GB7613@aftab> X-Enigmail-Version: 0.95.7 Content-Type: multipart/mixed; boundary="------------060605070706060904030806" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This is a multi-part message in MIME format. --------------060605070706060904030806 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Borislav Petkov wrote: > On Thu, Feb 19, 2009 at 10:16:40AM -0500, Mark Hounschell wrote: >> Andreas Herrmann wrote: >>> Hi Mark, >>> >>> Can you please provide us output of lspci -vvxxx. >>> (Please run this as root.) >>> Attached... >>> Furthermore you can try booting your 1000HZ kernel >>> with following kernel command lines: >>> >>> (1) acpi_skip_timer_override apic=debug BIOS EBDA/lowmem at: 0009f000/0009f000 Initializing cgroup subsys cpuset Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #6 SMP PREEMPT Thu Feb9 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable) BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS) BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data) BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI 2.5 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0xbffe0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 RAMDISK: 374d0000 - 37feff8f Allocated new RAMDISK: 004a7000 - 00fc6f8f Move RAMDISK from 00000000374d0000 - 0000000037feff8e to 004a7000 - 00fc6f8e ACPI: RSDP 000F7FB0, 0024 (r2 RX780 ) ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0) ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0) FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4) ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E) ACPI: FACS BFFE0000, 0040 ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1) ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98) ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0) ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0) 2183MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00012000 - 00018f00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54] #4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [00004a7000 - 0000fc6f8f] NEW RAMDISK ==> [00004a7000 - 0000fc6f8f] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00f3f00] 000f3f00 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000bffe0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000bffe0 SB600 revision 0x13 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10b9a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) PERCPU: Allocating 36864 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143 Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5 apm=off selinux=0 noresume splash=silent apic=debug console=ttyS0,19200n8 vga=normg Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: PIT calibration matches PMTIMER. 1 loops Detected 3000.246 MHz processor. Console: colour VGA+ 80x25 console [ttyS0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3103456k/3145600k available (1835k kernel code, 40784k reserved, 1099k data, 276k init, 2236296k highmem) virtual kernel memory layout: fixmap : 0xffe19000 - 0xfffff000 (1944 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc03e3000 - 0xc0428000 ( 276 kB) .data : 0xc02caf57 - 0xc03ddc4c (1099 kB) .text : 0xc0100000 - 0xc02caf57 (1835 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 HPE >>> (2) nohpet apic=debug BIOS EBDA/lowmem at: 0009f000/0009f000 Initializing cgroup subsys cpuset Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #6 SMP PREEMPT Thu Feb9 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable) BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS) BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data) BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI 2.5 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0xbffe0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 RAMDISK: 374d0000 - 37feff8f Allocated new RAMDISK: 004a7000 - 00fc6f8f Move RAMDISK from 00000000374d0000 - 0000000037feff8e to 004a7000 - 00fc6f8e ACPI: RSDP 000F7FB0, 0024 (r2 RX780 ) ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0) ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0) FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4) ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E) ACPI: FACS BFFE0000, 0040 ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1) ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98) ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0) ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0) 2183MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00012000 - 00018f00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54] #4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [00004a7000 - 0000fc6f8f] NEW RAMDISK ==> [00004a7000 - 0000fc6f8f] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00f3f00] 000f3f00 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000bffe0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000bffe0 ACPI: PM-Timer IO Port: 0x4008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10b9a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) PERCPU: Allocating 36864 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143 Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5 apm=off selinux=0 noresume splash=silent apic=debug console=ttyS0,19200n8 vga=normg Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 4096 (order: 12, 16384 bytes) TSC: PIT calibration matches PMTIMER. 1 loops Detected 3000.204 MHz processor. Console: colour VGA+ 80x25 console [ttyS0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3103456k/3145600k available (1835k kernel code, 40784k reserved, 1099k data, 276k init, 2236296k highmem) virtual kernel memory layout: fixmap : 0xffe19000 - 0xfffff000 (1944 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc03e3000 - 0xc0428000 ( 276 kB) .data : 0xc02caf57 - 0xc03ddc4c (1099 kB) .text : 0xc0100000 - 0xc02caf57 (1835 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Cal >>> (3) acpi_skip_timer_override nohpet apic=debug BIOS EBDA/lowmem at: 0009f000/0009f000 Initializing cgroup subsys cpuset Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #6 SMP PREEMPT Thu Feb9 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable) BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS) BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data) BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI 2.5 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0xbffe0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 RAMDISK: 374d0000 - 37feff8f Allocated new RAMDISK: 004a7000 - 00fc6f8f Move RAMDISK from 00000000374d0000 - 0000000037feff8e to 004a7000 - 00fc6f8e ACPI: RSDP 000F7FB0, 0024 (r2 RX780 ) ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0) ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0) FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4) ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E) ACPI: FACS BFFE0000, 0040 ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1) ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98) ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0) ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0) 2183MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00012000 - 00018f00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54] #4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [00004a7000 - 0000fc6f8f] NEW RAMDISK ==> [00004a7000 - 0000fc6f8f] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00f3f00] 000f3f00 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000bffe0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000bffe0 SB600 revision 0x13 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10b9a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) PERCPU: Allocating 36864 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143 Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5 apm=off selinux=0 noresume splash=silent apic=debug console=ttyS0,19200n8 vga=normg Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 3000.222 MHz processor. Console: colour VGA+ 80x25 console [ttyS0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3103456k/3145600k available (1835k kernel code, 40784k reserved, 1099k data, 276k init, 2236296k highmem) virtual kernel memory layout: fixmap : 0xffe19000 - 0xfffff000 (1944 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc03e3000 - 0xc0428000 ( 276 kB) .data : 0xc02caf57 - 0xc03ddc4c (1099 kB) .text : 0xc0100000 - 0xc02caf57 (1835 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Cal It would seem that one small printk you asked me to put in makes a quite a difference as to what gets printed. If you want me to put that back in and do this again let me know. I'll be by this box all day today. I noticed minicom is truncating some of this, like the cmdline. I did use the cmdline args asked for though. Mark --------------060605070706060904030806 Content-Type: text/plain; name="d.lspci.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="d.lspci.txt" 00:00.0 Host bridge: ATI Technologies Inc RX780/RX790 Chipset Host Bridge Subsystem: ATI Technologies Inc RX780/RX790 Chipset Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- (64-bit, non-prefetchable) Capabilities: [c4] HyperTransport: Slave or Primary Interface Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL- Link Control 0: CFlE- CST- CFE- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0f00c Data: 41c1 Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5957 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information Capabilities: [110] Virtual Channel Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 02 10 78 59 07 04 10 00 00 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 d1 d1 00 00 20: 00 f8 f0 fb 01 c0 f1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 08 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 c8 00 00 00 00 10 a0 42 00 20 80 00 00 60: 1f 08 00 00 02 0d 30 00 40 00 01 71 80 25 14 00 70: 00 00 40 01 00 00 01 00 00 00 00 00 1f 00 00 00 80: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 b0 01 00 0c f0 e0 fe c1 41 00 00 00 00 00 00 b0: 0d b8 00 00 02 10 57 59 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 50 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:04.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port A) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0f00c Data: 41c9 Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5957 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information Capabilities: [110] Virtual Channel Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 02 10 7a 59 07 04 10 00 00 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 c1 c1 00 00 20: b0 fd b0 fd a1 fd a1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 c8 00 00 00 00 10 a0 42 00 20 80 00 00 60: 1f 08 00 00 22 0c 30 00 40 00 11 70 80 0c 24 00 70: 00 00 40 01 00 00 01 00 00 00 00 00 1f 00 00 00 80: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 b0 01 00 0c f0 e0 fe c9 41 00 00 00 00 00 00 b0: 0d b8 00 00 02 10 57 59 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 50 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:06.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0f00c Data: 41d1 Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5957 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information Capabilities: [110] Virtual Channel Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 02 10 7c 59 07 04 10 00 00 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 b1 b1 00 00 20: f0 fd f0 fd e1 fd e1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 c8 00 00 00 00 10 a0 42 00 20 80 00 00 60: 1f 08 00 00 12 0c 30 02 40 00 11 70 80 0c 34 00 70: 00 00 40 01 00 00 01 00 00 00 00 00 1f 00 00 00 80: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 b0 01 00 0c f0 e0 fe d1 41 00 00 00 00 00 00 b0: 0d b8 00 00 02 10 57 59 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 50 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:07.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0f00c Data: 41d9 Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5957 Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [100] Vendor Specific Information Capabilities: [110] Virtual Channel Kernel driver in use: pcieport-driver Kernel modules: shpchp 00: 02 10 7d 59 07 04 10 00 00 00 04 06 08 00 01 00 10: 00 00 00 00 00 00 00 00 00 04 04 00 e1 e1 00 00 20: d0 fd d0 fd c1 fd c1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 58 03 c8 00 00 00 00 10 a0 42 00 20 80 00 00 60: 1f 08 00 00 12 0c 30 03 40 00 11 70 80 0c 3c 00 70: 00 00 40 01 00 00 01 00 00 00 00 00 1f 00 00 00 80: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 05 b0 01 00 0c f0 e0 fe d9 41 00 00 00 00 00 00 b0: 0d b8 00 00 02 10 57 59 08 00 03 a8 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 50 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01 [AHCI 1.0]) Subsystem: ATI Technologies Inc SB600 Non-Raid-5 SATA Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00: 02 10 84 43 27 00 a0 02 00 01 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 00 05 05 40 a0 a0 80 22 20: 90 fd 90 fd 80 fd 80 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 26 00 3c ff 00 00 00 00 0c 01 3f d1 00 01 00 00 50: 01 00 00 00 08 00 03 a8 00 00 00 00 85 00 ff ff 60: ca 0e 17 00 ba 18 10 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 06 e0: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 40: 00 01 00 00 5c 00 b0 4a 00 00 00 00 00 00 00 00 50: d8 5c 7c 0f ff 9d 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 04 00 24 34 00 00 00 30 52 80 01 00 70: 53 11 04 00 01 01 18 00 14 0c 20 00 14 09 09 00 80: 81 e6 00 e6 e6 41 e6 01 08 00 00 00 00 00 40 00 90: 00 00 00 00 ef 7b 00 00 f0 ff f0 7f 00 00 00 00 a0: 00 09 02 80 80 18 8c 25 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 24 0f 81 c8 15 1c 00 03 22 63 47 01 e0: 00 00 00 00 30 0c c0 1f 79 3f 07 02 00 00 00 00 f0: 0f 00 10 00 00 00 00 00 00 00 00 00 42 0f 10 00 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Capabilities: [128] Power Budgeting Capabilities: [600] Vendor Specific Information Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb 00: de 10 02 04 07 00 10 00 a1 00 00 03 00 00 00 00 10: 00 00 00 fa 0c 00 00 c0 00 00 00 00 04 00 00 f8 20: 00 00 00 00 01 df 00 00 00 00 00 00 6e 19 40 04 30: 00 00 00 00 60 00 00 00 00 00 00 00 05 01 00 00 40: 6e 19 40 04 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00 60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 10 00 01 00 e0 84 00 00 80: 10 29 00 00 01 3d 01 00 48 00 01 11 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06) Subsystem: Intel Corporation PRO/1000 PT Desktop Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [140] Device Serial Number 1b-09-0f-ff-ff-21-1b-00 Kernel driver in use: e1000e Kernel modules: e1000e 00: 86 80 b9 10 07 04 10 00 06 00 00 02 08 00 00 00 10: 00 00 be fd 00 00 bc fd 01 cf 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 83 10 30: 00 00 00 00 c8 00 00 00 00 00 00 00 03 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 01 d0 22 c8 00 20 00 21 d0: 05 e0 81 00 0c f0 e0 fe 00 00 00 00 42 41 00 00 e0: 10 00 01 00 c1 0c 00 00 10 28 1a 00 11 64 03 00 f0: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00 03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0f00c Data: 4132 Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting Kernel driver in use: sky2 Kernel modules: sky2 00: ab 11 64 43 07 04 10 00 13 00 00 02 08 00 00 00 10: 04 c0 df fd 00 00 00 00 01 ee 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 65 15 00 27 30: 00 00 00 00 48 00 00 00 00 00 00 00 0b 01 00 00 40: 00 00 f0 01 00 80 a0 01 01 50 03 fe 00 20 00 13 50: 03 5c 7c 80 00 00 00 01 00 00 00 01 05 e0 81 00 60: 0c f0 e0 fe 00 00 00 00 32 41 00 00 00 00 00 00 70: 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 70 00 00 00 00 00 00 82 a8 e8 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 10 00 11 00 c0 8f 00 00 00 20 19 00 11 ac 07 03 f0: 48 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00 05:05.0 Class ff00: Compro Computer Services, Inc. Device 4610 (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR-